Browse Source

Ensure that DaVinci chips can't start with a too-fast JTAG clock.

It can be sped up later, once it's known the PLLs are active.

Note that modern tools from TI all use adaptive clocking; and
that if that's done with OpenOCD, "too fast" is also a non-issue.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2740 b42882b7-edfa-0310-969c-e2dbd0fdcd60
tags/v0.3.0-rc0
dbrownell 12 years ago
parent
commit
108028112f
3 changed files with 18 additions and 0 deletions
  1. +6
    -0
      tcl/target/ti_dm355.cfg
  2. +6
    -0
      tcl/target/ti_dm365.cfg
  3. +6
    -0
      tcl/target/ti_dm6446.cfg

+ 6
- 0
tcl/target/ti_dm355.cfg View File

@@ -86,6 +86,12 @@ $_TARGETNAME configure \
-work-area-size 0x4000 \
-work-area-backup 0

# be absolutely certain the JTAG clock will work with the worst-case
# CLKIN = 24 MHz (best case: 36 MHz) even when no bootloader turns
# on the PLL and starts using it. OK to speed up after clock setup.
jtag_rclk 1500
$_TARGETNAME configure -event "reset-start" { jtag_rclk 1500 }

arm7_9 fast_memory_access enable
arm7_9 dcc_downloads enable



+ 6
- 0
tcl/target/ti_dm365.cfg View File

@@ -88,6 +88,12 @@ $_TARGETNAME configure \
-work-area-size 0x4000 \
-work-area-backup 0

# be absolutely certain the JTAG clock will work with the worst-case
# CLKIN = 19.2 MHz (best case: 36 MHz) even when no bootloader turns
# on the PLL and starts using it. OK to speed up after clock setup.
jtag_rclk 1500
$_TARGETNAME configure -event "reset-start" { jtag_rclk 1500 }

arm7_9 fast_memory_access enable
arm7_9 dcc_downloads enable



+ 6
- 0
tcl/target/ti_dm6446.cfg View File

@@ -68,6 +68,12 @@ set _TARGETNAME $_CHIPNAME.arm
target create $_TARGETNAME arm926ejs -chain-position $_TARGETNAME
$_TARGETNAME configure -work-area-phys 0x0000a000 -work-area-size 0x2000

# be absolutely certain the JTAG clock will work with the worst-case
# CLKIN = 20 MHz (best case: 30 MHz) even when no bootloader turns
# on the PLL and starts using it. OK to speed up after clock setup.
jtag_rclk 1500
$_TARGETNAME configure -event "reset-start" { jtag_rclk 1500 }

arm7_9 fast_memory_access enable
arm7_9 dcc_downloads enable



Loading…
Cancel
Save