From 32aec3b5c87c08bda681a5d8abf74efa2e2f3535 Mon Sep 17 00:00:00 2001 From: Antonio Borneo Date: Thu, 4 Oct 2018 11:11:31 +0200 Subject: [PATCH] doc: fix some typo about STMicroelectronics name s/ST/STMicroelectronics/ s/ST Micro/STMicroelectronics/ s/ST Microelectronics/STMicroelectronics/ Change-Id: I62aef331d172db22a70841a089c1889e37997cde Signed-off-by: Antonio Borneo Reviewed-on: http://openocd.zylin.com/4718 Tested-by: jenkins Reviewed-by: Spencer Oliver --- doc/openocd.texi | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/doc/openocd.texi b/doc/openocd.texi index 179bf4d5b..711ef4d54 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -156,8 +156,8 @@ OpenOCD internally. @xref{Debug Adapter Hardware}. @b{GDB Debug:} It allows ARM7 (ARM7TDMI and ARM720t), ARM9 (ARM920T, ARM922T, ARM926EJ--S, ARM966E--S), XScale (PXA25x, IXP42x), Cortex-M3 -(Stellaris LM3, ST STM32 and Energy Micro EFM32) and Intel Quark (x10xx) -based cores to be debugged via the GDB protocol. +(Stellaris LM3, STMicroelectronics STM32 and Energy Micro EFM32) and +Intel Quark (x10xx) based cores to be debugged via the GDB protocol. @b{Flash Programming:} Flash writing is supported for external CFI-compatible NOR flashes (Intel and AMD/Spansion command set) and several @@ -477,8 +477,8 @@ SWD and not JTAG, thus not supported. @end itemize @section USB ST-LINK based -ST Micro has an adapter called @b{ST-LINK}. -They only work with ST Micro chips, notably STM32 and STM8. +STMicroelectronics has an adapter called @b{ST-LINK}. +They only work with STMicroelectronics chips, notably STM32 and STM8. @itemize @bullet @item @b{ST-LINK} @@ -3047,7 +3047,7 @@ This is a driver that supports multiple High Level Adapters. This type of adapter does not expose some of the lower level api's that OpenOCD would normally use to access the target. -Currently supported adapters include the ST ST-LINK and TI ICDI. +Currently supported adapters include the STMicroelectronics ST-LINK and TI ICDI. ST-LINK firmware version >= V2.J21.S4 recommended due to issues with earlier versions of firmware where serial number is reset after first use. Suggest using ST firmware update utility to upgrade ST-LINK firmware even if current @@ -6470,7 +6470,7 @@ applied to all of them. @deffn {Flash Driver} stm32f1x All members of the STM32F0, STM32F1 and STM32F3 microcontroller families -from ST Microelectronics include internal flash and use ARM Cortex-M0/M3/M4 cores. +from STMicroelectronics include internal flash and use ARM Cortex-M0/M3/M4 cores. The driver automatically recognizes a number of these chips using the chip identification register, and autoconfigures itself. @@ -6530,7 +6530,7 @@ The @var{num} parameter is a value shown by @command{flash banks}. @end deffn @deffn {Flash Driver} stm32f2x -All members of the STM32F2, STM32F4 and STM32F7 microcontroller families from ST Microelectronics +All members of the STM32F2, STM32F4 and STM32F7 microcontroller families from STMicroelectronics include internal flash and use ARM Cortex-M3/M4/M7 cores. The driver automatically recognizes a number of these chips using the chip identification register, and autoconfigures itself. @@ -6584,7 +6584,7 @@ The @var{num} parameter is a value shown by @command{flash banks}, @var{optcr2} @end deffn @deffn {Flash Driver} stm32h7x -All members of the STM32H7 microcontroller families from ST Microelectronics +All members of the STM32H7 microcontroller families from STMicroelectronics include internal flash and use ARM Cortex-M7 core. The driver automatically recognizes a number of these chips using the chip identification register, and autoconfigures itself. @@ -6620,7 +6620,7 @@ The @var{num} parameter is a value shown by @command{flash banks}. @end deffn @deffn {Flash Driver} stm32lx -All members of the STM32L microcontroller families from ST Microelectronics +All members of the STM32L microcontroller families from STMicroelectronics include internal flash and use ARM Cortex-M3 and Cortex-M0+ cores. The driver automatically recognizes a number of these chips using the chip identification register, and autoconfigures itself. @@ -6660,7 +6660,7 @@ The @var{num} parameter is a value shown by @command{flash banks}. @end deffn @deffn {Flash Driver} stm32l4x -All members of the STM32L4 microcontroller families from ST Microelectronics +All members of the STM32L4 microcontroller families from STMicroelectronics include internal flash and use ARM Cortex-M4 cores. The driver automatically recognizes a number of these chips using the chip identification register, and autoconfigures itself. @@ -6732,7 +6732,7 @@ The @var{num} parameter is a value shown by @command{flash banks}. @end deffn @deffn {Flash Driver} str7x -All members of the STR7 microcontroller family from ST Microelectronics +All members of the STR7 microcontroller family from STMicroelectronics include internal flash and use ARM7TDMI cores. The @var{str7x} driver defines one mandatory parameter, @var{variant}, which is either @code{STR71x}, @code{STR73x} or @code{STR75x}. @@ -6749,7 +6749,7 @@ for the specified flash bank. @end deffn @deffn {Flash Driver} str9x -Most members of the STR9 microcontroller family from ST Microelectronics +Most members of the STR9 microcontroller family from STMicroelectronics include internal flash and use ARM966E cores. The str9 needs the flash controller to be configured using the @command{str9x flash_config} command prior to Flash programming.