cfg: update scripts to use new stm32 driver names

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

tcl/board/hitex_stm32-performancestick.cfg

@@ -5,7 +5,7 @@ reset_config trst_and_srst
 source [find interface/stm32-stick.cfg]
 
 set  CHIPNAME stm32_hitex
-source [find target/stm32.cfg]
+source [find target/stm32f1x.cfg]
 
 # configure str750 connected to jtag chain
 # FIXME -- source [find target/str750.cfg] after cleaning that up

tcl/board/olimex_stm32_h103.cfg

@@ -4,4 +4,4 @@
 # Work-area size (RAM size) = 20kB for STM32F103RB device
 set WORKAREASIZE 0x5000
 
-source [find target/stm32.cfg]
+source [find target/stm32f1x.cfg]

tcl/board/olimex_stm32_h107.cfg

@@ -5,4 +5,4 @@
 # Work-area size (RAM size) = 64kB for STM32F107VC device
 set WORKAREASIZE 0x10000
 
-source [find target/stm32.cfg]
+source [find target/stm32f1x.cfg]

tcl/board/stm32100b_eval.cfg

@@ -4,4 +4,4 @@
 # The chip has only 8KB sram
 set WORKAREASIZE 0x2000
 
-source [find target/stm32.cfg]
+source [find target/stm32f1x.cfg]

tcl/board/stm3210b_eval.cfg

@@ -4,4 +4,4 @@
 # increase working area to 32KB for faster flash programming
 set WORKAREASIZE 0x8000
 
-source [find target/stm32.cfg]
+source [find target/stm32f1x.cfg]

tcl/board/stm3210c_eval.cfg

@@ -4,4 +4,4 @@
 # increase working area to 32KB for faster flash programming
 set WORKAREASIZE 0x8000
 
-source [find target/stm32.cfg]
+source [find target/stm32f1x.cfg]

tcl/board/stm3210e_eval.cfg

@@ -4,7 +4,7 @@
 # increase working area to 32KB for faster flash programming
 set WORKAREASIZE 0x8000
 
-source [find target/stm32.cfg]
+source [find target/stm32f1x.cfg]
 
 #
 # configure FSMC Bank 1 (NOR/PSRAM Bank 2) NOR flash

tcl/board/stm3220g_eval.cfg

@@ -8,4 +8,4 @@ set WORKAREASIZE 0x20000
 # chip name
 set CHIPNAME STM32F207IGT6
 
-source [find target/stm32f2xxx.cfg]
+source [find target/stm32f2x.cfg]

tcl/target/stm32.cfg → tcl/target/stm32f1x.cfg

@@ -68,7 +68,7 @@ $_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE
 
 # flash size will be probed
 set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME stm32x 0x08000000 0 0 0 $_TARGETNAME
+flash bank $_FLASHNAME stm32f1x 0x08000000 0 0 0 $_TARGETNAME
 
 # if srst is not fitted use SYSRESETREQ to
 # perform a soft reset

tcl/target/stm32f2xxx.cfg → tcl/target/stm32f2x.cfg

@@ -57,5 +57,5 @@ target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNA
 $_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
 
 set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME stm32f2xxx 0 0 0 0 $_TARGETNAME
+flash bank $_FLASHNAME stm32f2x 0 0 0 0 $_TARGETNAME
 

tcl/target/stm32xl.cfg

@@ -1,6 +1,6 @@
 # script for stm32xl family (dual flash bank)
-source [find target/stm32.cfg]
+source [find target/stm32f1x.cfg]
 
 # flash size will be probed
 set _FLASHNAME $_CHIPNAME.flash1
-flash bank $_FLASHNAME stm32x 0x08080000 0 0 0 $_TARGETNAME
+flash bank $_FLASHNAME stm32f1x 0x08080000 0 0 0 $_TARGETNAME