tcl: remove silly ocd_ prefix to array2mem and mem2array

ocd_ prefix is used internally in OpenOCD as a kludge more
or less to deal with the two kinds of commands that OpenOCD
has.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

doc/openocd.texi

@@ -7209,10 +7209,10 @@ Low-level commands are (should be) prefixed with "ocd_", e.g.
 is the low level API upon which @command{flash banks} is implemented.
 
 @itemize @bullet
-@item @b{ocd_mem2array} <@var{varname}> <@var{width}> <@var{addr}> <@var{nelems}>
+@item @b{mem2array} <@var{varname}> <@var{width}> <@var{addr}> <@var{nelems}>
 
 Read memory and return as a Tcl array for script processing
-@item @b{ocd_array2mem} <@var{varname}> <@var{width}> <@var{addr}> <@var{nelems}>
+@item @b{array2mem} <@var{varname}> <@var{width}> <@var{addr}> <@var{nelems}>
 
 Convert a Tcl array to memory locations and write the values
 @item @b{ocd_flash_banks} <@var{driver}> <@var{base}> <@var{size}> <@var{chip_width}> <@var{bus_width}> <@var{target}> [@option{driver options} ...]

src/target/target.c

@@ -5296,7 +5296,7 @@ static const struct command_registration target_exec_command_handlers[] = {
 		.usage = "filename [offset [type]]",
 	},
 	{
-		.name = "ocd_mem2array",
+		.name = "mem2array",
 		.mode = COMMAND_EXEC,
 		.jim_handler = jim_mem2array,
 		.help = "read 8/16/32 bit memory and return as a TCL array "
@@ -5304,7 +5304,7 @@ static const struct command_registration target_exec_command_handlers[] = {
 		.usage = "arrayname bitwidth address count",
 	},
 	{
-		.name = "ocd_array2mem",
+		.name = "array2mem",
 		.mode = COMMAND_EXEC,
 		.jim_handler = jim_array2mem,
 		.help = "convert a TCL array to memory locations "

tcl/board/at91cap7a-stk-sdram.cfg

@@ -32,7 +32,7 @@ $_TARGETNAME configure -event reset-start {
 }
 
 proc peek32 {address} {
-	ocd_mem2array t 32 $address 1
+	mem2array t 32 $address 1
 	return $t(0)
 }
 

tcl/board/at91sam9g20-ek.cfg

@@ -67,7 +67,7 @@ at91sam9 ce 0 0xfffff800 14
 
 proc read_register {register} {
         set result ""
-        ocd_mem2array result 32 $register 1
+        mem2array result 32 $register 1
         return $result(0)
 }
 

tcl/chip/atmel/at91/aic.tcl

@@ -54,7 +54,7 @@ proc show_AIC_IMR_helper { NAME ADDR VAL } {
 
 proc show_AIC { } {
     global AIC_SMR
-    if [catch { ocd_mem2array aaa 32 $AIC_SMR [expr 32 * 4] } msg ] {
+    if [catch { mem2array aaa 32 $AIC_SMR [expr 32 * 4] } msg ] {
 	error [format "%s (%s)" $msg AIC_SMR]
     }
     puts "AIC_SMR: Mode & Type"
@@ -71,7 +71,7 @@ proc show_AIC { } {
 	incr x
     }
     global AIC_SVR
-    if [catch { ocd_mem2array aaa 32 $AIC_SVR [expr 32 * 4] } msg ] {
+    if [catch { mem2array aaa 32 $AIC_SVR [expr 32 * 4] } msg ] {
 	error [format "%s (%s)" $msg AIC_SVR]
     }
     puts "AIC_SVR: Vectors"

tcl/memory.tcl

@@ -80,7 +80,7 @@ proc address_info { ADDRESS } {
 
 proc memread32 {ADDR} {
     set foo(0) 0
-    if ![ catch { ocd_mem2array foo 32 $ADDR 1  } msg ] {
+    if ![ catch { mem2array foo 32 $ADDR 1  } msg ] {
 	return $foo(0)
     } else {
 	error "memread32: $msg"
@@ -89,7 +89,7 @@ proc memread32 {ADDR} {
 
 proc memread16 {ADDR} {
     set foo(0) 0
-    if ![ catch { ocd_mem2array foo 16 $ADDR 1  } msg ] {
+    if ![ catch { mem2array foo 16 $ADDR 1  } msg ] {
 	return $foo(0)
     } else {
 	error "memread16: $msg"
@@ -98,7 +98,7 @@ proc memread16 {ADDR} {
 
 proc memread8 {ADDR} {
     set foo(0) 0
-    if ![ catch { ocd_mem2array foo 8 $ADDR 1  } msg ] {
+    if ![ catch { mem2array foo 8 $ADDR 1  } msg ] {
 	return $foo(0)
     } else {
 	error "memread8: $msg"
@@ -107,7 +107,7 @@ proc memread8 {ADDR} {
 
 proc memwrite32 {ADDR DATA} {
     set foo(0) $DATA
-    if ![ catch { ocd_array2mem foo 32 $ADDR 1  } msg ] {
+    if ![ catch { array2mem foo 32 $ADDR 1  } msg ] {
 	return $foo(0)
     } else {
 	error "memwrite32: $msg"
@@ -116,7 +116,7 @@ proc memwrite32 {ADDR DATA} {
 
 proc memwrite16 {ADDR DATA} {
     set foo(0) $DATA
-    if ![ catch { ocd_array2mem foo 16 $ADDR 1  } msg ] {
+    if ![ catch { array2mem foo 16 $ADDR 1  } msg ] {
 	return $foo(0)
     } else {
 	error "memwrite16: $msg"
@@ -125,7 +125,7 @@ proc memwrite16 {ADDR DATA} {
 
 proc memwrite8 {ADDR DATA} {
     set foo(0) $DATA
-    if ![ catch { ocd_array2mem foo 8 $ADDR 1  } msg ] {
+    if ![ catch { array2mem foo 8 $ADDR 1  } msg ] {
 	return $foo(0)
     } else {
 	error "memwrite8: $msg"

tcl/target/c100helper.tcl

@@ -29,14 +29,14 @@ proc helpC100 {} {
 # mrw: "memory read word", returns value of $reg
 proc mrw {reg} {
     set value ""
-    ocd_mem2array value 32 $reg 1
+    mem2array value 32 $reg 1
     return $value(0)
 }
 
 # read a 64-bit register (memory mapped)
 proc mr64bit {reg} {
     set value ""
-    ocd_mem2array value 32 $reg 2
+    mem2array value 32 $reg 2
     return $value
 }
 
@@ -131,7 +131,7 @@ proc showAmbaClk {} {
     set PLL_CLK_BYPASS	             [regs PLL_CLK_BYPASS]
 
     puts [format "CLKCORE_AHB_CLK_CNTRL       (0x%x): 0x%x" $CLKCORE_AHB_CLK_CNTRL [mrw $CLKCORE_AHB_CLK_CNTRL]]
-    ocd_mem2array value 32 $CLKCORE_AHB_CLK_CNTRL 1
+    mem2array value 32 $CLKCORE_AHB_CLK_CNTRL 1
     # see if the PLL is in bypass mode
     set bypass [expr ($value(0) & $PLL_CLK_BYPASS) >> 24 ]
     puts [format "PLL bypass bit: %d" $bypass]
@@ -206,7 +206,7 @@ proc showArmClk {} {
     set PLL_CLK_BYPASS	        [regs PLL_CLK_BYPASS]
 
     puts [format "CLKCORE_ARM_CLK_CNTRL       (0x%x): 0x%x" $CLKCORE_ARM_CLK_CNTRL [mrw $CLKCORE_ARM_CLK_CNTRL]]
-    ocd_mem2array value 32 $CLKCORE_ARM_CLK_CNTRL 1
+    mem2array value 32 $CLKCORE_ARM_CLK_CNTRL 1
     # see if the PLL is in bypass mode
     set bypass [expr ($value(0) & $PLL_CLK_BYPASS) >> 24 ]
     puts [format "PLL bypass bit: %d" $bypass]

tcl/target/davinci.cfg

@@ -10,7 +10,7 @@ proc davinci_pinmux {soc reg value} {
 # mrw: "memory read word", returns value of $reg
 proc mrw {reg} {
 	set value ""
-	ocd_mem2array value 32 $reg 1
+	mem2array value 32 $reg 1
 	return $value(0)
 }
 

testing/examples/cortex/cm3-ftest.cfg

@@ -50,7 +50,7 @@ proc load_and_run { name halfwords n_instr } {
 	echo "# code to trigger $name vector"
 	set addr 0x20000000
 
-	# ocd_array2mem should be faster, though we'd need to
+	# array2mem should be faster, though we'd need to
 	# compute the resulting $addr ourselves
 	foreach opcode $halfwords {
 		mwh $addr $opcode