Signed-off-by: Paul Fertser <fercerpav@gmail.com>tags/v0.9.0-rc1
@@ -2,105 +2,27 @@ This file includes highlights of the changes made in the OpenOCD | |||
source archive release. | |||
JTAG Layer: | |||
* New CMSIS-DAP driver | |||
* Andes AICE debug adapter support | |||
* New OpenJTAG driver | |||
* New BCM2835 (RaspberryPi) driver | |||
* JTAG VPI client driver (for OpenRISC Reference Platform SoC) | |||
* Xilinx BSCAN_* for OpenRISC support | |||
* ST-LINKv2-1 support | |||
* ST-LINKv2 SWO tracing support (UART emulation) | |||
* JLink-OB (onboard) support | |||
* Altera USB Blaster driver rewrite, initial Blaster II | |||
support | |||
* ULINK driver ported to libusb-1.0, OpenULINK build fixes | |||
* Support up to 64 bit IR lengths | |||
* SVF playback (FPGA programming) fixes | |||
* "ftdi" interface driver got extensive testing and is now | |||
recommended over the old ft2232 implementation | |||
Boundary Scan: | |||
Target Layer: | |||
* New target: Andes nds32 | |||
* New target: OpenRISC OR1K | |||
* New target: Intel Quark X10xx | |||
* MIPS EJTAG 1.5/2.0 support | |||
* MIPS speed improvements | |||
* Cortex-M, Cortex-A (MEM-AP, APB-AP) targets working with BE | |||
hosts now | |||
* XScale vector_catch support, reset fixes | |||
* dsp563xx ad-hoc breakpoint/watchpoint support | |||
* RTOS support for embKernel | |||
* Target profiling improvements | |||
* Memory access functions testbench | |||
Flash Layer: | |||
* STM32 family sync with reference manuals, other bugfixes | |||
* STM32F401, STM32F07x support | |||
* Atmel SAM4L, SAMG5x support | |||
* at91sam3sd8{a,b}, at91sam3s8{a,b,c}, at91sam4s, | |||
at91sam3n0{a,b,0a,0b} support, bugfixes | |||
* Atmel SAMD support | |||
* Milandr 1986ВЕ* support | |||
* Kinetis KL, K21 support | |||
* Nuvoton NuMicro MINI5{1,2,4} support | |||
* Nuvoton NUC910 series support | |||
* NXP LPC43xx, LPC2000 fixes | |||
* NXP LPC800, LPC810 support | |||
* More ATmega parts supported | |||
* Fujitsu MB9Ax family support | |||
* EFM32 Wonder Gecko family support | |||
* Nordic nRF51 support | |||
Board, Target, and Interface Configuration Scripts: | |||
* STM32W108xx generic target config | |||
* STM32F429 discovery board config | |||
* STM32 Nucleo boards configs | |||
* DENX M53EVK board config | |||
* Altera Cyclone V SoC, SoCkit config | |||
* New TI Launchpads board configs | |||
* TI am43xx devices, AM437x GP EVM, AM438x ePOS EVM board | |||
configs | |||
* Marvell Armada 370 family initial support | |||
* TI TMDX570LS31USB (TMS570, Cortex-R4) support scripts | |||
* Freescale FRDM-KL25Z, KL46Z board configs | |||
* Digilent Zedboard config | |||
* Asus RT-N16, Linksys WRT54GL, BT HomeHub board configs | |||
* Atmel Xplained initial support | |||
* Broadcom bcm28155_ap board config | |||
* TUMPA, TUMPA Lite interface configs | |||
* Digilent JTAG-SMT2 interface config | |||
* New RAM testing functions | |||
* Easy-to-use firmware recovery helpers targetting ordinary | |||
users with common equipment | |||
Server Layer: | |||
* Auto-generation of GDB target description for ARMv7-M, | |||
ARM4, nds32, OR1K, Quark | |||
* GDB File-I/O Remote Protocol extension support | |||
* Default GDB flashing events handlers to initialise and reset | |||
the target automatically when "load" is used | |||
Documentation: | |||
* Extensive README* changes | |||
* The official User's Guide was proofread | |||
* Example cross-build script | |||
* RTOS documentation improvements | |||
* Tcl RPC documentation and examples added | |||
Build and Release: | |||
* *BSD, OS X, clang, ARM, windows build fixes | |||
* New pkg-config support changes the way libusb (and other | |||
dependencies) are handled. Many adapter drivers are now | |||
selected automatically during the configure stage. | |||
This release also contains a number of other important functional and | |||
cosmetic bugfixes. For more details about what has changed since the | |||
last release, see the git repository history: | |||
http://sourceforge.net/p/openocd/code/ci/v0.8.0/log/?path= | |||
http://sourceforge.net/p/openocd/code/ci/v0.9.0/log/?path= | |||
For older NEWS, see the NEWS files associated with each release | |||
@@ -0,0 +1,111 @@ | |||
This file includes highlights of the changes made in the OpenOCD | |||
source archive release. | |||
JTAG Layer: | |||
* New CMSIS-DAP driver | |||
* Andes AICE debug adapter support | |||
* New OpenJTAG driver | |||
* New BCM2835 (RaspberryPi) driver | |||
* JTAG VPI client driver (for OpenRISC Reference Platform SoC) | |||
* Xilinx BSCAN_* for OpenRISC support | |||
* ST-LINKv2-1 support | |||
* ST-LINKv2 SWO tracing support (UART emulation) | |||
* JLink-OB (onboard) support | |||
* Altera USB Blaster driver rewrite, initial Blaster II | |||
support | |||
* ULINK driver ported to libusb-1.0, OpenULINK build fixes | |||
* Support up to 64 bit IR lengths | |||
* SVF playback (FPGA programming) fixes | |||
* "ftdi" interface driver got extensive testing and is now | |||
recommended over the old ft2232 implementation | |||
Boundary Scan: | |||
Target Layer: | |||
* New target: Andes nds32 | |||
* New target: OpenRISC OR1K | |||
* New target: Intel Quark X10xx | |||
* MIPS EJTAG 1.5/2.0 support | |||
* MIPS speed improvements | |||
* Cortex-M, Cortex-A (MEM-AP, APB-AP) targets working with BE | |||
hosts now | |||
* XScale vector_catch support, reset fixes | |||
* dsp563xx ad-hoc breakpoint/watchpoint support | |||
* RTOS support for embKernel | |||
* Target profiling improvements | |||
* Memory access functions testbench | |||
Flash Layer: | |||
* STM32 family sync with reference manuals, other bugfixes | |||
* STM32F401, STM32F07x support | |||
* Atmel SAM4L, SAMG5x support | |||
* at91sam3sd8{a,b}, at91sam3s8{a,b,c}, at91sam4s, | |||
at91sam3n0{a,b,0a,0b} support, bugfixes | |||
* Atmel SAMD support | |||
* Milandr 1986ВЕ* support | |||
* Kinetis KL, K21 support | |||
* Nuvoton NuMicro MINI5{1,2,4} support | |||
* Nuvoton NUC910 series support | |||
* NXP LPC43xx, LPC2000 fixes | |||
* NXP LPC800, LPC810 support | |||
* More ATmega parts supported | |||
* Fujitsu MB9Ax family support | |||
* EFM32 Wonder Gecko family support | |||
* Nordic nRF51 support | |||
Board, Target, and Interface Configuration Scripts: | |||
* STM32W108xx generic target config | |||
* STM32F429 discovery board config | |||
* STM32 Nucleo boards configs | |||
* DENX M53EVK board config | |||
* Altera Cyclone V SoC, SoCkit config | |||
* New TI Launchpads board configs | |||
* TI am43xx devices, AM437x GP EVM, AM438x ePOS EVM board | |||
configs | |||
* Marvell Armada 370 family initial support | |||
* TI TMDX570LS31USB (TMS570, Cortex-R4) support scripts | |||
* Freescale FRDM-KL25Z, KL46Z board configs | |||
* Digilent Zedboard config | |||
* Asus RT-N16, Linksys WRT54GL, BT HomeHub board configs | |||
* Atmel Xplained initial support | |||
* Broadcom bcm28155_ap board config | |||
* TUMPA, TUMPA Lite interface configs | |||
* Digilent JTAG-SMT2 interface config | |||
* New RAM testing functions | |||
* Easy-to-use firmware recovery helpers targetting ordinary | |||
users with common equipment | |||
Server Layer: | |||
* Auto-generation of GDB target description for ARMv7-M, | |||
ARM4, nds32, OR1K, Quark | |||
* GDB File-I/O Remote Protocol extension support | |||
* Default GDB flashing events handlers to initialise and reset | |||
the target automatically when "load" is used | |||
Documentation: | |||
* Extensive README* changes | |||
* The official User's Guide was proofread | |||
* Example cross-build script | |||
* RTOS documentation improvements | |||
* Tcl RPC documentation and examples added | |||
Build and Release: | |||
* *BSD, OS X, clang, ARM, windows build fixes | |||
* New pkg-config support changes the way libusb (and other | |||
dependencies) are handled. Many adapter drivers are now | |||
selected automatically during the configure stage. | |||
This release also contains a number of other important functional and | |||
cosmetic bugfixes. For more details about what has changed since the | |||
last release, see the git repository history: | |||
http://sourceforge.net/p/openocd/code/ci/v0.8.0/log/?path= | |||
For older NEWS, see the NEWS files associated with each release | |||
(i.e. NEWS-<version>). | |||
For more information about contributing test reports, bug fixes, or new | |||
features and device support, please read the new Developer Manual (or | |||
the BUGS and PATCHES.txt files in the source archive). |
@@ -1,5 +1,5 @@ | |||
AC_PREREQ(2.64) | |||
AC_INIT([openocd], [0.8.0], | |||
AC_INIT([openocd], [0.9.0-dev], | |||
[OpenOCD Mailing List <openocd-devel@lists.sourceforge.net>]) | |||
AC_CONFIG_SRCDIR([src/openocd.c]) | |||