Browse Source

target/adiv5: Large Physical Address Extension

Provides ARM LPAE support to allow 64-bit TAR setting
on MEM AP accesses.

Tested on a 4-core ARM ARES Processor system using an
AXI Access Port.

Change-Id: I88f7a0a57a6abb58665032929194a41dd8729f6b
Signed-off-by: Kevin Burke <kevinb@os.amperecomputing.com>
Signed-off-by: Daniel Goehring <dgoehrin@os.amperecomputing.com>
Reviewed-on: http://openocd.zylin.com/5576
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
jim
Kevin Burke 3 years ago
committed by Antonio Borneo
parent
commit
ac22cdc573
7 changed files with 168 additions and 74 deletions
  1. +3
    -3
      src/target/aarch64.c
  2. +125
    -56
      src/target/arm_adi_v5.c
  3. +33
    -11
      src/target/arm_adi_v5.h
  4. +3
    -0
      src/target/arm_dap.c
  5. +1
    -1
      src/target/armv7a.h
  6. +1
    -1
      src/target/armv8.h
  7. +2
    -2
      src/target/cortex_a.c

+ 3
- 3
src/target/aarch64.c View File

@@ -252,7 +252,7 @@ static int aarch64_init_debug_access(struct target *target)

/* Write to memory mapped registers directly with no cache or mmu handling */
static int aarch64_dap_write_memap_register_u32(struct target *target,
uint32_t address,
target_addr_t address,
uint32_t value)
{
int retval;
@@ -2571,7 +2571,7 @@ static int aarch64_examine_first(struct target *target)
armv8->debug_ap->memaccess_tck = 10;

if (!target->dbgbase_set) {
uint32_t dbgbase;
target_addr_t dbgbase;
/* Get ROM Table base */
uint32_t apid;
int32_t coreidx = target->coreid;
@@ -2583,7 +2583,7 @@ static int aarch64_examine_first(struct target *target)
&armv8->debug_base, &coreidx);
if (retval != ERROR_OK)
return retval;
LOG_DEBUG("Detected core %" PRId32 " dbgbase: %08" PRIx32
LOG_DEBUG("Detected core %" PRId32 " dbgbase: " TARGET_ADDR_FMT
" apid: %08" PRIx32, coreidx, armv8->debug_base, apid);
} else
armv8->debug_base = target->dbgbase;


+ 125
- 56
src/target/arm_adi_v5.c View File

@@ -13,6 +13,8 @@
* Copyright (C) 2013 by Andreas Fritiofson *
* andreas.fritiofson@gmail.com *
* *
* Copyright (C) 2019-2021, Ampere Computing LLC *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
* the Free Software Foundation; either version 2 of the License, or *
@@ -86,7 +88,7 @@
uint32_t tar_block_size(uint32_t address)
Return the largest block starting at address that does not cross a tar block size alignment boundary
*/
static uint32_t max_tar_block_size(uint32_t tar_autoincr_block, uint32_t address)
static uint32_t max_tar_block_size(uint32_t tar_autoincr_block, target_addr_t address)
{
return tar_autoincr_block - ((tar_autoincr_block - 1) & address);
}
@@ -113,11 +115,16 @@ static int mem_ap_setup_csw(struct adiv5_ap *ap, uint32_t csw)
return ERROR_OK;
}

static int mem_ap_setup_tar(struct adiv5_ap *ap, uint32_t tar)
static int mem_ap_setup_tar(struct adiv5_ap *ap, target_addr_t tar)
{
if (!ap->tar_valid || tar != ap->tar_value) {
/* LOG_DEBUG("DAP: Set TAR %x",tar); */
int retval = dap_queue_ap_write(ap, MEM_AP_REG_TAR, tar);
int retval = dap_queue_ap_write(ap, MEM_AP_REG_TAR, (uint32_t)(tar & 0xffffffffUL));
if (retval == ERROR_OK && is_64bit_ap(ap)) {
/* See if bits 63:32 of tar is different from last setting */
if ((ap->tar_value >> 32) != (tar >> 32))
retval = dap_queue_ap_write(ap, MEM_AP_REG_TAR64, (uint32_t)(tar >> 32));
}
if (retval != ERROR_OK) {
ap->tar_valid = false;
return retval;
@@ -128,9 +135,15 @@ static int mem_ap_setup_tar(struct adiv5_ap *ap, uint32_t tar)
return ERROR_OK;
}

static int mem_ap_read_tar(struct adiv5_ap *ap, uint32_t *tar)
static int mem_ap_read_tar(struct adiv5_ap *ap, target_addr_t *tar)
{
int retval = dap_queue_ap_read(ap, MEM_AP_REG_TAR, tar);
uint32_t lower;
uint32_t upper = 0;

int retval = dap_queue_ap_read(ap, MEM_AP_REG_TAR, &lower);
if (retval == ERROR_OK && is_64bit_ap(ap))
retval = dap_queue_ap_read(ap, MEM_AP_REG_TAR64, &upper);

if (retval != ERROR_OK) {
ap->tar_valid = false;
return retval;
@@ -142,6 +155,8 @@ static int mem_ap_read_tar(struct adiv5_ap *ap, uint32_t *tar)
return retval;
}

*tar = (((target_addr_t)upper) << 32) | (target_addr_t)lower;

ap->tar_value = *tar;
ap->tar_valid = true;
return ERROR_OK;
@@ -198,7 +213,7 @@ static void mem_ap_update_tar_cache(struct adiv5_ap *ap)
*
* @return ERROR_OK if the transaction was properly queued, else a fault code.
*/
static int mem_ap_setup_transfer(struct adiv5_ap *ap, uint32_t csw, uint32_t tar)
static int mem_ap_setup_transfer(struct adiv5_ap *ap, uint32_t csw, target_addr_t tar)
{
int retval;
retval = mem_ap_setup_csw(ap, csw);
@@ -221,7 +236,7 @@ static int mem_ap_setup_transfer(struct adiv5_ap *ap, uint32_t csw, uint32_t tar
*
* @return ERROR_OK for success. Otherwise a fault code.
*/
int mem_ap_read_u32(struct adiv5_ap *ap, uint32_t address,
int mem_ap_read_u32(struct adiv5_ap *ap, target_addr_t address,
uint32_t *value)
{
int retval;
@@ -231,7 +246,7 @@ int mem_ap_read_u32(struct adiv5_ap *ap, uint32_t address,
*/
retval = mem_ap_setup_transfer(ap,
CSW_32BIT | (ap->csw_value & CSW_ADDRINC_MASK),
address & 0xFFFFFFF0);
address & 0xFFFFFFFFFFFFFFF0ull);
if (retval != ERROR_OK)
return retval;

@@ -250,7 +265,7 @@ int mem_ap_read_u32(struct adiv5_ap *ap, uint32_t address,
* @return ERROR_OK for success; *value holds the result.
* Otherwise a fault code.
*/
int mem_ap_read_atomic_u32(struct adiv5_ap *ap, uint32_t address,
int mem_ap_read_atomic_u32(struct adiv5_ap *ap, target_addr_t address,
uint32_t *value)
{
int retval;
@@ -273,7 +288,7 @@ int mem_ap_read_atomic_u32(struct adiv5_ap *ap, uint32_t address,
*
* @return ERROR_OK for success. Otherwise a fault code.
*/
int mem_ap_write_u32(struct adiv5_ap *ap, uint32_t address,
int mem_ap_write_u32(struct adiv5_ap *ap, target_addr_t address,
uint32_t value)
{
int retval;
@@ -283,7 +298,7 @@ int mem_ap_write_u32(struct adiv5_ap *ap, uint32_t address,
*/
retval = mem_ap_setup_transfer(ap,
CSW_32BIT | (ap->csw_value & CSW_ADDRINC_MASK),
address & 0xFFFFFFF0);
address & 0xFFFFFFFFFFFFFFF0ull);
if (retval != ERROR_OK)
return retval;

@@ -302,7 +317,7 @@ int mem_ap_write_u32(struct adiv5_ap *ap, uint32_t address,
*
* @return ERROR_OK for success; the data was written. Otherwise a fault code.
*/
int mem_ap_write_atomic_u32(struct adiv5_ap *ap, uint32_t address,
int mem_ap_write_atomic_u32(struct adiv5_ap *ap, target_addr_t address,
uint32_t value)
{
int retval = mem_ap_write_u32(ap, address, value);
@@ -326,13 +341,13 @@ int mem_ap_write_atomic_u32(struct adiv5_ap *ap, uint32_t address,
* @return ERROR_OK on success, otherwise an error code.
*/
static int mem_ap_write(struct adiv5_ap *ap, const uint8_t *buffer, uint32_t size, uint32_t count,
uint32_t address, bool addrinc)
target_addr_t address, bool addrinc)
{
struct adiv5_dap *dap = ap->dap;
size_t nbytes = size * count;
const uint32_t csw_addrincr = addrinc ? CSW_ADDRINC_SINGLE : CSW_ADDRINC_OFF;
uint32_t csw_size;
uint32_t addr_xor;
target_addr_t addr_xor;
int retval = ERROR_OK;

/* TI BE-32 Quirks mode:
@@ -433,9 +448,9 @@ static int mem_ap_write(struct adiv5_ap *ap, const uint8_t *buffer, uint32_t siz
retval = dap_run(dap);

if (retval != ERROR_OK) {
uint32_t tar;
target_addr_t tar;
if (mem_ap_read_tar(ap, &tar) == ERROR_OK)
LOG_ERROR("Failed to write memory at 0x%08"PRIx32, tar);
LOG_ERROR("Failed to write memory at " TARGET_ADDR_FMT, tar);
else
LOG_ERROR("Failed to write memory and, additionally, failed to find out where");
}
@@ -456,13 +471,13 @@ static int mem_ap_write(struct adiv5_ap *ap, const uint8_t *buffer, uint32_t siz
* @return ERROR_OK on success, otherwise an error code.
*/
static int mem_ap_read(struct adiv5_ap *ap, uint8_t *buffer, uint32_t size, uint32_t count,
uint32_t adr, bool addrinc)
target_addr_t adr, bool addrinc)
{
struct adiv5_dap *dap = ap->dap;
size_t nbytes = size * count;
const uint32_t csw_addrincr = addrinc ? CSW_ADDRINC_SINGLE : CSW_ADDRINC_OFF;
uint32_t csw_size;
uint32_t address = adr;
target_addr_t address = adr;
int retval = ERROR_OK;

/* TI BE-32 Quirks mode:
@@ -538,10 +553,10 @@ static int mem_ap_read(struct adiv5_ap *ap, uint8_t *buffer, uint32_t size, uint
/* If something failed, read TAR to find out how much data was successfully read, so we can
* at least give the caller what we have. */
if (retval != ERROR_OK) {
uint32_t tar;
target_addr_t tar;
if (mem_ap_read_tar(ap, &tar) == ERROR_OK) {
/* TAR is incremented after failed transfer on some devices (eg Cortex-M4) */
LOG_ERROR("Failed to read memory at 0x%08"PRIx32, tar);
LOG_ERROR("Failed to read memory at " TARGET_ADDR_FMT, tar);
if (nbytes > tar - address)
nbytes = tar - address;
} else {
@@ -594,25 +609,25 @@ static int mem_ap_read(struct adiv5_ap *ap, uint8_t *buffer, uint32_t size, uint
}

int mem_ap_read_buf(struct adiv5_ap *ap,
uint8_t *buffer, uint32_t size, uint32_t count, uint32_t address)
uint8_t *buffer, uint32_t size, uint32_t count, target_addr_t address)
{
return mem_ap_read(ap, buffer, size, count, address, true);
}

int mem_ap_write_buf(struct adiv5_ap *ap,
const uint8_t *buffer, uint32_t size, uint32_t count, uint32_t address)
const uint8_t *buffer, uint32_t size, uint32_t count, target_addr_t address)
{
return mem_ap_write(ap, buffer, size, count, address, true);
}

int mem_ap_read_buf_noincr(struct adiv5_ap *ap,
uint8_t *buffer, uint32_t size, uint32_t count, uint32_t address)
uint8_t *buffer, uint32_t size, uint32_t count, target_addr_t address)
{
return mem_ap_read(ap, buffer, size, count, address, false);
}

int mem_ap_write_buf_noincr(struct adiv5_ap *ap,
const uint8_t *buffer, uint32_t size, uint32_t count, uint32_t address)
const uint8_t *buffer, uint32_t size, uint32_t count, target_addr_t address)
{
return mem_ap_write(ap, buffer, size, count, address, false);
}
@@ -761,6 +776,17 @@ int mem_ap_init(struct adiv5_ap *ap)
int retval;
struct adiv5_dap *dap = ap->dap;

/* Set ap->cfg_reg before calling mem_ap_setup_transfer(). */
/* mem_ap_setup_transfer() needs to know if the MEM_AP supports LPAE. */
retval = dap_queue_ap_read(ap, MEM_AP_REG_CFG, &cfg);
if (retval != ERROR_OK)
return retval;

retval = dap_run(dap);
if (retval != ERROR_OK)
return retval;

ap->cfg_reg = cfg;
ap->tar_valid = false;
ap->csw_value = 0; /* force csw and tar write */
retval = mem_ap_setup_transfer(ap, CSW_8BIT | CSW_ADDRINC_PACKED, 0);
@@ -771,10 +797,6 @@ int mem_ap_init(struct adiv5_ap *ap)
if (retval != ERROR_OK)
return retval;

retval = dap_queue_ap_read(ap, MEM_AP_REG_CFG, &cfg);
if (retval != ERROR_OK)
return retval;

retval = dap_run(dap);
if (retval != ERROR_OK)
return retval;
@@ -801,7 +823,7 @@ int mem_ap_init(struct adiv5_ap *ap)
ap->unaligned_access_bad = dap->ti_be_32_quirks;

LOG_DEBUG("MEM_AP CFG: large data %d, long address %d, big-endian %d",
!!(cfg & 0x04), !!(cfg & 0x02), !!(cfg & 0x01));
!!(cfg & MEM_AP_REG_CFG_LD), !!(cfg & MEM_AP_REG_CFG_LA), !!(cfg & MEM_AP_REG_CFG_BE));

return ERROR_OK;
}
@@ -918,12 +940,22 @@ int dap_find_ap(struct adiv5_dap *dap, enum ap_type type_to_find, struct adiv5_a
}

int dap_get_debugbase(struct adiv5_ap *ap,
uint32_t *dbgbase, uint32_t *apid)
target_addr_t *dbgbase, uint32_t *apid)
{
struct adiv5_dap *dap = ap->dap;
int retval;
uint32_t baseptr_upper, baseptr_lower;

baseptr_upper = 0;

if (is_64bit_ap(ap)) {
/* Read higher order 32-bits of base address */
retval = dap_queue_ap_read(ap, MEM_AP_REG_BASE64, &baseptr_upper);
if (retval != ERROR_OK)
return retval;
}

retval = dap_queue_ap_read(ap, MEM_AP_REG_BASE, dbgbase);
retval = dap_queue_ap_read(ap, MEM_AP_REG_BASE, &baseptr_lower);
if (retval != ERROR_OK)
return retval;
retval = dap_queue_ap_read(ap, AP_REG_IDR, apid);
@@ -933,31 +965,34 @@ int dap_get_debugbase(struct adiv5_ap *ap,
if (retval != ERROR_OK)
return retval;

*dbgbase = (((target_addr_t)baseptr_upper) << 32) | baseptr_lower;

return ERROR_OK;
}

int dap_lookup_cs_component(struct adiv5_ap *ap,
uint32_t dbgbase, uint8_t type, uint32_t *addr, int32_t *idx)
target_addr_t dbgbase, uint8_t type, target_addr_t *addr, int32_t *idx)
{
uint32_t romentry, entry_offset = 0, component_base, devtype;
uint32_t romentry, entry_offset = 0, devtype;
target_addr_t component_base;
int retval;

dbgbase &= 0xFFFFFFFFFFFFF000ull;
*addr = 0;

do {
retval = mem_ap_read_atomic_u32(ap, (dbgbase&0xFFFFF000) |
retval = mem_ap_read_atomic_u32(ap, dbgbase |
entry_offset, &romentry);
if (retval != ERROR_OK)
return retval;

component_base = (dbgbase & 0xFFFFF000)
+ (romentry & 0xFFFFF000);
component_base = dbgbase + (target_addr_t)(romentry & 0xFFFFF000);

if (romentry & 0x1) {
uint32_t c_cid1;
retval = mem_ap_read_atomic_u32(ap, component_base | 0xff4, &c_cid1);
if (retval != ERROR_OK) {
LOG_ERROR("Can't read component with base address 0x%" PRIx32
LOG_ERROR("Can't read component with base address " TARGET_ADDR_FMT
", the corresponding core might be turned off", component_base);
return retval;
}
@@ -970,9 +1005,7 @@ int dap_lookup_cs_component(struct adiv5_ap *ap,
return retval;
}

retval = mem_ap_read_atomic_u32(ap,
(component_base & 0xfffff000) | 0xfcc,
&devtype);
retval = mem_ap_read_atomic_u32(ap, component_base | 0xfcc, &devtype);
if (retval != ERROR_OK)
return retval;
if ((devtype & 0xff) == type) {
@@ -984,7 +1017,7 @@ int dap_lookup_cs_component(struct adiv5_ap *ap,
}
}
entry_offset += 4;
} while (romentry > 0);
} while ((romentry > 0) && (entry_offset < 0xf00));

if (!*addr)
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
@@ -992,7 +1025,7 @@ int dap_lookup_cs_component(struct adiv5_ap *ap,
return ERROR_OK;
}

static int dap_read_part_id(struct adiv5_ap *ap, uint32_t component_base, uint32_t *cid, uint64_t *pid)
static int dap_read_part_id(struct adiv5_ap *ap, target_addr_t component_base, uint32_t *cid, uint64_t *pid)
{
assert((component_base & 0xFFF) == 0);
assert(ap != NULL && cid != NULL && pid != NULL);
@@ -1179,7 +1212,7 @@ static const struct {
};

static int dap_rom_display(struct command_invocation *cmd,
struct adiv5_ap *ap, uint32_t dbgbase, int depth)
struct adiv5_ap *ap, target_addr_t dbgbase, int depth)
{
int retval;
uint64_t pid;
@@ -1194,8 +1227,8 @@ static int dap_rom_display(struct command_invocation *cmd,
if (depth)
snprintf(tabs, sizeof(tabs), "[L%02d] ", depth);

uint32_t base_addr = dbgbase & 0xFFFFF000;
command_print(cmd, "\t\tComponent base address 0x%08" PRIx32, base_addr);
target_addr_t base_addr = dbgbase & 0xFFFFFFFFFFFFF000ull;
command_print(cmd, "\t\tComponent base address " TARGET_ADDR_FMT, base_addr);

retval = dap_read_part_id(ap, base_addr, &cid, &pid);
if (retval != ERROR_OK) {
@@ -1211,7 +1244,7 @@ static int dap_rom_display(struct command_invocation *cmd,
/* component may take multiple 4K pages */
uint32_t size = (pid >> 36) & 0xf;
if (size > 0)
command_print(cmd, "\t\tStart address 0x%08" PRIx32, (uint32_t)(base_addr - 0x1000 * size));
command_print(cmd, "\t\tStart address " TARGET_ADDR_FMT, base_addr - 0x1000 * size);

command_print(cmd, "\t\tPeripheral ID 0x%010" PRIx64, pid);

@@ -1436,7 +1469,9 @@ int dap_info_command(struct command_invocation *cmd,
struct adiv5_ap *ap)
{
int retval;
uint32_t dbgbase, apid;
uint32_t apid;
target_addr_t dbgbase;
target_addr_t dbgaddr;
uint8_t mem_ap;

/* Now we read ROM table ID registers, ref. ARM IHI 0029B sec */
@@ -1476,9 +1511,14 @@ int dap_info_command(struct command_invocation *cmd,
*/
mem_ap = (apid & IDR_CLASS) == AP_CLASS_MEM_AP;
if (mem_ap) {
command_print(cmd, "MEM-AP BASE 0x%8.8" PRIx32, dbgbase);
if (is_64bit_ap(ap))
dbgaddr = 0xFFFFFFFFFFFFFFFFull;
else
dbgaddr = 0xFFFFFFFFul;

if (dbgbase == 0xFFFFFFFF || (dbgbase & 0x3) == 0x2) {
command_print(cmd, "MEM-AP BASE " TARGET_ADDR_FMT, dbgbase);

if (dbgbase == dbgaddr || (dbgbase & 0x3) == 0x2) {
command_print(cmd, "\tNo ROM table present");
} else {
if (dbgbase & 0x01)
@@ -1486,7 +1526,7 @@ int dap_info_command(struct command_invocation *cmd,
else
command_print(cmd, "\tROM table in legacy format");

dap_rom_display(cmd, ap, dbgbase & 0xFFFFF000, 0);
dap_rom_display(cmd, ap, dbgbase & 0xFFFFFFFFFFFFF000ull, 0);
}
}

@@ -1690,9 +1730,13 @@ COMMAND_HANDLER(handle_dap_info_command)
COMMAND_HANDLER(dap_baseaddr_command)
{
struct adiv5_dap *dap = adiv5_get_dap(CMD_DATA);
uint32_t apsel, baseaddr;
uint32_t apsel, baseaddr_lower, baseaddr_upper;
struct adiv5_ap *ap;
target_addr_t baseaddr;
int retval;

baseaddr_upper = 0;

switch (CMD_ARGC) {
case 0:
apsel = dap->apsel;
@@ -1714,14 +1758,22 @@ COMMAND_HANDLER(dap_baseaddr_command)
* though they're not common for now. This should
* use the ID register to verify it's a MEM-AP.
*/
retval = dap_queue_ap_read(dap_ap(dap, apsel), MEM_AP_REG_BASE, &baseaddr);

ap = dap_ap(dap, apsel);
retval = dap_queue_ap_read(ap, MEM_AP_REG_BASE, &baseaddr_lower);

if (is_64bit_ap(ap) && retval == ERROR_OK)
retval = dap_queue_ap_read(ap, MEM_AP_REG_BASE64, &baseaddr_upper);
if (retval != ERROR_OK)
return retval;
retval = dap_run(dap);
if (retval != ERROR_OK)
return retval;

command_print(CMD, "0x%8.8" PRIx32, baseaddr);
if (is_64bit_ap(ap)) {
baseaddr = (((target_addr_t)baseaddr_upper) << 32) | baseaddr_lower;
command_print(CMD, "0x%016" PRIx64, baseaddr);
} else
command_print(CMD, "0x%08" PRIx32, baseaddr_lower);

return retval;
}
@@ -1885,8 +1937,25 @@ COMMAND_HANDLER(dap_apreg_command)
ap->csw_value = value;
break;
case MEM_AP_REG_TAR:
ap->tar_valid = false; /* invalid, force write */
retval = mem_ap_setup_tar(ap, value);
retval = dap_queue_ap_write(ap, reg, value);
if (retval == ERROR_OK)
ap->tar_value = (ap->tar_value & ~0xFFFFFFFFull) | value;
else {
/* To track independent writes to TAR and TAR64, two tar_valid flags */
/* should be used. To keep it simple, tar_valid is only invalidated on a */
/* write fail. This approach causes a later re-write of the TAR and TAR64 */
/* if tar_valid is false. */
ap->tar_valid = false;
}
break;
case MEM_AP_REG_TAR64:
retval = dap_queue_ap_write(ap, reg, value);
if (retval == ERROR_OK)
ap->tar_value = (ap->tar_value & 0xFFFFFFFFull) | (((target_addr_t)value) << 32);
else {
/* See above comment for the MEM_AP_REG_TAR failed write case */
ap->tar_valid = false;
}
break;
default:
retval = dap_queue_ap_write(ap, reg, value);


+ 33
- 11
src/target/arm_adi_v5.h View File

@@ -31,6 +31,7 @@

#include <helper/list.h>
#include "arm_jtag.h"
#include "helper/bits.h"

/* three-bit ACK values for SWD access (sent LSB first) */
#define SWD_ACK_OK 0x1
@@ -149,6 +150,10 @@
/* APB: initial value of csw_default */
#define CSW_APB_DEFAULT (CSW_DBGSWENABLE)

/* Fields of the MEM-AP's CFG register */
#define MEM_AP_REG_CFG_BE BIT(0)
#define MEM_AP_REG_CFG_LA BIT(1)
#define MEM_AP_REG_CFG_LD BIT(2)

/* Fields of the MEM-AP's IDR register */
#define IDR_REV (0xFUL << 28)
@@ -201,7 +206,7 @@ struct adiv5_ap {
* configure the address being read or written
* "-1" indicates no cached value.
*/
uint32_t tar_value;
target_addr_t tar_value;

/**
* Configures how many extra tck clocks are added after starting a
@@ -220,6 +225,9 @@ struct adiv5_ap {

/* true if tar_value is in sync with TAR register */
bool tar_valid;

/* MEM AP configuration register indicating LPAE support */
uint32_t cfg_reg;
};


@@ -359,6 +367,20 @@ enum ap_type {
AP_TYPE_AHB5_AP = 0x5, /* AHB5 Memory-AP. */
};

/* Check the ap->cfg_reg Long Address field (bit 1)
*
* 0b0: The AP only supports physical addresses 32 bits or smaller
* 0b1: The AP supports physical addresses larger than 32 bits
*
* @param ap The AP used for reading.
*
* @return true for 64 bit, false for 32 bit
*/
static inline bool is_64bit_ap(struct adiv5_ap *ap)
{
return (ap->cfg_reg & MEM_AP_REG_CFG_LA) != 0;
}

/**
* Send an adi-v5 sequence to the DAP.
*
@@ -528,27 +550,27 @@ static inline int dap_dp_poll_register(struct adiv5_dap *dap, unsigned reg,

/* Queued MEM-AP memory mapped single word transfers. */
int mem_ap_read_u32(struct adiv5_ap *ap,
uint32_t address, uint32_t *value);
target_addr_t address, uint32_t *value);
int mem_ap_write_u32(struct adiv5_ap *ap,
uint32_t address, uint32_t value);
target_addr_t address, uint32_t value);

/* Synchronous MEM-AP memory mapped single word transfers. */
int mem_ap_read_atomic_u32(struct adiv5_ap *ap,
uint32_t address, uint32_t *value);
target_addr_t address, uint32_t *value);
int mem_ap_write_atomic_u32(struct adiv5_ap *ap,
uint32_t address, uint32_t value);
target_addr_t address, uint32_t value);

/* Synchronous MEM-AP memory mapped bus block transfers. */
int mem_ap_read_buf(struct adiv5_ap *ap,
uint8_t *buffer, uint32_t size, uint32_t count, uint32_t address);
uint8_t *buffer, uint32_t size, uint32_t count, target_addr_t address);
int mem_ap_write_buf(struct adiv5_ap *ap,
const uint8_t *buffer, uint32_t size, uint32_t count, uint32_t address);
const uint8_t *buffer, uint32_t size, uint32_t count, target_addr_t address);

/* Synchronous, non-incrementing buffer functions for accessing fifos. */
int mem_ap_read_buf_noincr(struct adiv5_ap *ap,
uint8_t *buffer, uint32_t size, uint32_t count, uint32_t address);
uint8_t *buffer, uint32_t size, uint32_t count, target_addr_t address);
int mem_ap_write_buf_noincr(struct adiv5_ap *ap,
const uint8_t *buffer, uint32_t size, uint32_t count, uint32_t address);
const uint8_t *buffer, uint32_t size, uint32_t count, target_addr_t address);

/* Initialisation of the debug system, power domains and registers */
int dap_dp_init(struct adiv5_dap *dap);
@@ -560,7 +582,7 @@ void dap_invalidate_cache(struct adiv5_dap *dap);

/* Probe the AP for ROM Table location */
int dap_get_debugbase(struct adiv5_ap *ap,
uint32_t *dbgbase, uint32_t *apid);
target_addr_t *dbgbase, uint32_t *apid);

/* Probe Access Ports to find a particular type */
int dap_find_ap(struct adiv5_dap *dap,
@@ -574,7 +596,7 @@ static inline struct adiv5_ap *dap_ap(struct adiv5_dap *dap, uint8_t ap_num)

/* Lookup CoreSight component */
int dap_lookup_cs_component(struct adiv5_ap *ap,
uint32_t dbgbase, uint8_t type, uint32_t *addr, int32_t *idx);
target_addr_t dbgbase, uint8_t type, target_addr_t *addr, int32_t *idx);

struct target;



+ 3
- 0
src/target/arm_dap.c View File

@@ -36,6 +36,8 @@ extern const struct dap_ops swd_dap_ops;
extern const struct dap_ops jtag_dp_ops;
extern struct adapter_driver *adapter_driver;

#define ADI_BAD_CFG 0xBAD00000

/* DAP command support */
struct arm_dap_object {
struct list_head lh;
@@ -57,6 +59,7 @@ static void dap_instance_init(struct adiv5_dap *dap)
dap->ap[i].tar_autoincr_block = (1<<10);
/* default CSW value */
dap->ap[i].csw_default = CSW_AHB_DEFAULT;
dap->ap[i].cfg_reg = ADI_BAD_CFG; /* mem_ap configuration reg (large physical addr, etc.) */
}
INIT_LIST_HEAD(&dap->cmd_journal);
INIT_LIST_HEAD(&dap->cmd_pool);


+ 1
- 1
src/target/armv7a.h View File

@@ -104,7 +104,7 @@ struct armv7a_common {

/* Core Debug Unit */
struct arm_dpm dpm;
uint32_t debug_base;
target_addr_t debug_base;
struct adiv5_ap *debug_ap;
/* mdir */
uint8_t multi_processor_system;


+ 1
- 1
src/target/armv8.h View File

@@ -196,7 +196,7 @@ struct armv8_common {

/* Core Debug Unit */
struct arm_dpm dpm;
uint32_t debug_base;
target_addr_t debug_base;
struct adiv5_ap *debug_ap;

const uint32_t *opcodes;


+ 2
- 2
src/target/cortex_a.c View File

@@ -2907,7 +2907,7 @@ static int cortex_a_examine_first(struct target *target)
armv7a->debug_ap->memaccess_tck = 80;

if (!target->dbgbase_set) {
uint32_t dbgbase;
target_addr_t dbgbase;
/* Get ROM Table base */
uint32_t apid;
int32_t coreidx = target->coreid;
@@ -2924,7 +2924,7 @@ static int cortex_a_examine_first(struct target *target)
target->cmd_name);
return retval;
}
LOG_DEBUG("Detected core %" PRId32 " dbgbase: %08" PRIx32,
LOG_DEBUG("Detected core %" PRId32 " dbgbase: " TARGET_ADDR_FMT,
target->coreid, armv7a->debug_base);
} else
armv7a->debug_base = target->dbgbase;


Loading…
Cancel
Save