Browse Source

tcl/interface: Adapt config files to new bcm2835gpio command syntax

Change-Id: I2d649117aa8dbdf5484ace068785a1416efa3ecc
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/6397
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
jim
Marc Schink 2 years ago
committed by Antonio Borneo
parent
commit
e57ffd84b8
2 changed files with 14 additions and 14 deletions
  1. +7
    -7
      tcl/interface/raspberrypi-native.cfg
  2. +7
    -7
      tcl/interface/raspberrypi2-native.cfg

+ 7
- 7
tcl/interface/raspberrypi-native.cfg View File

@@ -10,28 +10,28 @@

adapter driver bcm2835gpio

bcm2835gpio_peripheral_base 0x20000000
bcm2835gpio peripheral_base 0x20000000

# Transition delay calculation: SPEED_COEFF/khz - SPEED_OFFSET
# These depend on system clock, calibrated for stock 700MHz
# bcm2835gpio_speed SPEED_COEFF SPEED_OFFSET
bcm2835gpio_speed_coeffs 113714 28
# bcm2835gpio speed SPEED_COEFF SPEED_OFFSET
bcm2835gpio speed_coeffs 113714 28

# Each of the JTAG lines need a gpio number set: tck tms tdi tdo
# Header pin numbers: 23 22 19 21
bcm2835gpio_jtag_nums 11 25 10 9
bcm2835gpio jtag_nums 11 25 10 9

# Each of the SWD lines need a gpio number set: swclk swdio
# Header pin numbers: 23 22
bcm2835gpio_swd_nums 11 25
bcm2835gpio swd_nums 11 25

# If you define trst or srst, use appropriate reset_config
# Header pin numbers: TRST - 26, SRST - 18

# bcm2835gpio_trst_num 7
# bcm2835gpio trst_num 7
# reset_config trst_only

# bcm2835gpio_srst_num 24
# bcm2835gpio srst_num 24
# reset_config srst_only srst_push_pull

# or if you have both connected,


+ 7
- 7
tcl/interface/raspberrypi2-native.cfg View File

@@ -10,28 +10,28 @@

adapter driver bcm2835gpio

bcm2835gpio_peripheral_base 0x3F000000
bcm2835gpio peripheral_base 0x3F000000

# Transition delay calculation: SPEED_COEFF/khz - SPEED_OFFSET
# These depend on system clock, calibrated for stock 700MHz
# bcm2835gpio_speed SPEED_COEFF SPEED_OFFSET
bcm2835gpio_speed_coeffs 146203 36
# bcm2835gpio speed SPEED_COEFF SPEED_OFFSET
bcm2835gpio speed_coeffs 146203 36

# Each of the JTAG lines need a gpio number set: tck tms tdi tdo
# Header pin numbers: 23 22 19 21
bcm2835gpio_jtag_nums 11 25 10 9
bcm2835gpio jtag_nums 11 25 10 9

# Each of the SWD lines need a gpio number set: swclk swdio
# Header pin numbers: 23 22
bcm2835gpio_swd_nums 11 25
bcm2835gpio swd_nums 11 25

# If you define trst or srst, use appropriate reset_config
# Header pin numbers: TRST - 26, SRST - 18

# bcm2835gpio_trst_num 7
# bcm2835gpio trst_num 7
# reset_config trst_only

# bcm2835gpio_srst_num 24
# bcm2835gpio srst_num 24
# reset_config srst_only srst_push_pull

# or if you have both connected,


Loading…
Cancel
Save