Øyvind Harboe
b23b096c8e
Supply default reset_config statement to make target scripts useful standalone and provide sensible default
14 years ago
Wookey
456ec36795
Fix reset delays and tinker with ID's
14 years ago
Øyvind Harboe
bffe824df6
Added tip in documentation on how to translate quirky syntax
14 years ago
David Brownell
60e24aa597
make PXA255 targets enumerate sort-of-OK
Startup now mostly works, except that the initial target state
is "unknown" ... previously, it refused to even start.
Getting that far required fixing the ircapture value (which
can never have been correct!) and the default JTAG clock rate,
then providing custom reset script.
The "reset" command is still iffy. DCSR updates, and loading
the debug handler, report numerous DR/IR capture failures.
But once that's done, "poll" reports that the CPU is halted
(which it shouldn't be, this was "reset run"!), due to the
rather curious reason "target-not-halted".
Summary: you still can't debug these parts, but it's closer.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
14 years ago
Rabeeh Khoury
7b650a6abe
Function to flash SheevaPlug u-boot sectors
This function is used by the SheevaPlug installer to flash the
erase and re-flash the U-Boot environment in the NAND Flash.
14 years ago
David Brownell
41c1af7c67
initial builds of OSK5912 boards need srst_pulls_trst
This is clearly noted in the hardware spec (section 5.2.3); it
works around a chip erratum: "If the MPU_RESET signal is used,
it may cause the EMIFS bus to lock."
I seem to have a board with such an initial build. The chip
is labeled XOMAP. Presumably, parts without that "X" prefix
(eXperimental) resolve this.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
14 years ago
David Brownell
6efaa95c44
make OMAP5912 resets more reliable
Without some extra delay after releasing SRST, we seemed to
be trying to talk to the TAP before it was ready to respond.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
14 years ago
John Rigby
37e9f65f5a
iMX25 target support
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
14 years ago
oharboe
dc871f422d
first stab at imx35 reset init script
git-svn-id: svn://svn.berlios.de/openocd/trunk@2817 b42882b7-edfa-0310-969c-e2dbd0fdcd60
14 years ago
oharboe
71bca7640a
remove recrusive reset invocation from reset init callback
git-svn-id: svn://svn.berlios.de/openocd/trunk@2816 b42882b7-edfa-0310-969c-e2dbd0fdcd60
14 years ago
dbrownell
0da2f750a1
Add basic support for DM6446 EVM board.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2808 b42882b7-edfa-0310-969c-e2dbd0fdcd60
14 years ago
dbrownell
7d78021efa
Dragonite target script
From: Nicolas Pitre <nico@fluxnic.net>
git-svn-id: svn://svn.berlios.de/openocd/trunk@2806 b42882b7-edfa-0310-969c-e2dbd0fdcd60
14 years ago
oharboe
a2886fe3c6
stop using targetnum
git-svn-id: svn://svn.berlios.de/openocd/trunk@2804 b42882b7-edfa-0310-969c-e2dbd0fdcd60
14 years ago
dbrownell
7c7467b34f
Add a new JTAG "setup" event; use for better DaVinci ICEpick support.
The model is that this fires after scanchain verification, when it's
safe to call "jtag tapenable $TAPNAME". So it will fire as part of
non-error paths of "init" and "reset" command processing. However it
will *NOT* trigger during "jtag_reset" processing, which skips all
scan chain verification, or after verification errors.
ALSO:
- switch DaVinci chips to use this new mechanism
- log TAP activation/deactivation, since their IDCODEs aren't verified
- unify "enum jtag_event" scripted event notifications
- remove duplicative JTAG_TAP_EVENT_POST_RESET
git-svn-id: svn://svn.berlios.de/openocd/trunk@2800 b42882b7-edfa-0310-969c-e2dbd0fdcd60
14 years ago
dbrownell
c6b24fb4f0
Get rid of needless OMAP and Davinci target config options
so they provide better examples and are easier to maintain.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2797 b42882b7-edfa-0310-969c-e2dbd0fdcd60
14 years ago
mlu
f87985b614
Updated reset event handling in omap3530 cfg
git-svn-id: svn://svn.berlios.de/openocd/trunk@2796 b42882b7-edfa-0310-969c-e2dbd0fdcd60
14 years ago
dbrownell
32599fab1a
Remove annoying EOL whitespace (again, sigh).
git-svn-id: svn://svn.berlios.de/openocd/trunk@2781 b42882b7-edfa-0310-969c-e2dbd0fdcd60
14 years ago
oharboe
54c16fc56e
strip gdb config options
git-svn-id: svn://svn.berlios.de/openocd/trunk@2779 b42882b7-edfa-0310-969c-e2dbd0fdcd60
14 years ago
oharboe
642519649e
michal smulski <michal.smulski@ooma.com> reset now works
git-svn-id: svn://svn.berlios.de/openocd/trunk@2778 b42882b7-edfa-0310-969c-e2dbd0fdcd60
14 years ago
dbrownell
fbbd3066ff
Don't provide invalid OMAP5912 IR capture value/mask attributes
git-svn-id: svn://svn.berlios.de/openocd/trunk@2762 b42882b7-edfa-0310-969c-e2dbd0fdcd60
14 years ago
dbrownell
5c3c4af88f
On DM355 EVM board, associate NAND chips with $_TARGETNAME
instead of a target number.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2761 b42882b7-edfa-0310-969c-e2dbd0fdcd60
14 years ago
dbrownell
ad43374c7f
Update DM355 target config to know about ICEpick.
Still defaults to nonstandard EMU0/EMU1 settings.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2757 b42882b7-edfa-0310-969c-e2dbd0fdcd60
14 years ago
oharboe
43b3807878
Michael Hasselberg <mh@open-engineering.de> target configuration files for Toshiba TX09 familiy
git-svn-id: svn://svn.berlios.de/openocd/trunk@2756 b42882b7-edfa-0310-969c-e2dbd0fdcd60
14 years ago
dbrownell
71af49ca7f
Remove annoying end-of-line whitespace from tcl/* files
git-svn-id: svn://svn.berlios.de/openocd/trunk@2743 b42882b7-edfa-0310-969c-e2dbd0fdcd60
14 years ago
oharboe
0bcf5a6b76
Ethan Eade <ethan@evolution.com> board config script for Cogent CSB732 i.MX35 (arm1136)
git-svn-id: svn://svn.berlios.de/openocd/trunk@2741 b42882b7-edfa-0310-969c-e2dbd0fdcd60
14 years ago
dbrownell
108028112f
Ensure that DaVinci chips can't start with a too-fast JTAG clock.
It can be sped up later, once it's known the PLLs are active.
Note that modern tools from TI all use adaptive clocking; and
that if that's done with OpenOCD, "too fast" is also a non-issue.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2740 b42882b7-edfa-0310-969c-e2dbd0fdcd60
14 years ago
mlu
01735c515f
Reduced sleep time after reset
git-svn-id: svn://svn.berlios.de/openocd/trunk@2732 b42882b7-edfa-0310-969c-e2dbd0fdcd60
14 years ago
mlu
7b3be0e21e
Move Cortex A8 debug access initialisation from omap3530.cfg to cortex_a8.c
git-svn-id: svn://svn.berlios.de/openocd/trunk@2728 b42882b7-edfa-0310-969c-e2dbd0fdcd60
14 years ago
oharboe
9542318312
Rolf Meeser <rolfm_9dq@yahoo.de> adds flash support for NXP's LPC2900 family (ARM968E).
git-svn-id: svn://svn.berlios.de/openocd/trunk@2715 b42882b7-edfa-0310-969c-e2dbd0fdcd60
14 years ago
oharboe
772d8d06ea
Magnus Lundin <lundin@mlu.mine.nu> Disable poll while core register initialization
git-svn-id: svn://svn.berlios.de/openocd/trunk@2703 b42882b7-edfa-0310-969c-e2dbd0fdcd60
14 years ago
oharboe
40f361dd94
David Brownell <david-b@pacbell.net>
Update the board config for the DaVinci DM355 EVM so the reset-init
event handler does the rest of the work it should do:
- minor PLL setup bugfixes
- initialize the DDR2 controller
- probe both NAND banks
- initialize UART0
- enable the icache
git-svn-id: svn://svn.berlios.de/openocd/trunk@2699 b42882b7-edfa-0310-969c-e2dbd0fdcd60
14 years ago
oharboe
4f7761828c
tap post reset event added. Allows omap3530 to send 100 runtest idle tickle's after a TAP_RESET.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2696 b42882b7-edfa-0310-969c-e2dbd0fdcd60
14 years ago
ntfreak
ec3015db1a
- revert change made to sheevaplug.cfg in rev2573
git-svn-id: svn://svn.berlios.de/openocd/trunk@2695 b42882b7-edfa-0310-969c-e2dbd0fdcd60
14 years ago
oharboe
6dd8f37e6d
syntax error fix
git-svn-id: svn://svn.berlios.de/openocd/trunk@2689 b42882b7-edfa-0310-969c-e2dbd0fdcd60
14 years ago
oharboe
b4acbee47f
michal smulski <michal.smulski@ooma.com> telo target/board scripts
git-svn-id: svn://svn.berlios.de/openocd/trunk@2683 b42882b7-edfa-0310-969c-e2dbd0fdcd60
14 years ago
oharboe
0b11e4dbb4
use "armv4_5 core_state arm" instead of soft_reset_halt, fewer side effects
git-svn-id: svn://svn.berlios.de/openocd/trunk@2672 b42882b7-edfa-0310-969c-e2dbd0fdcd60
14 years ago
oharboe
b13dbc80e0
Dirk Behme <dirk.behme@googlemail.com> retire jtag_speed usage
git-svn-id: svn://svn.berlios.de/openocd/trunk@2671 b42882b7-edfa-0310-969c-e2dbd0fdcd60
14 years ago
oharboe
982ac083f0
Dirk Behme <dirk.behme@googlemail.com> Add default fall back freqency.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2670 b42882b7-edfa-0310-969c-e2dbd0fdcd60
14 years ago
oharboe
2e29131f2b
set ARM mode using explicit command rather than soft_reset_halt which has lots of side effects.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2669 b42882b7-edfa-0310-969c-e2dbd0fdcd60
14 years ago
oharboe
ce89c7bf65
David Brownell <david-b@pacbell.net> "set _TARGETNAME ..." cleanup
git-svn-id: svn://svn.berlios.de/openocd/trunk@2665 b42882b7-edfa-0310-969c-e2dbd0fdcd60
14 years ago
oharboe
76b78feef1
David Claffey <dnclaffey@gmail.com> get rid of reset recursion
git-svn-id: svn://svn.berlios.de/openocd/trunk@2664 b42882b7-edfa-0310-969c-e2dbd0fdcd60
14 years ago
oharboe
3878b12793
David Claffey <dnclaffey@gmail.com> tested with the Atheros reference design "PB44"
git-svn-id: svn://svn.berlios.de/openocd/trunk@2662 b42882b7-edfa-0310-969c-e2dbd0fdcd60
14 years ago
duane
cde17a42e9
Crusty Code fixes from the tcl directory re-arragements
git-svn-id: svn://svn.berlios.de/openocd/trunk@2661 b42882b7-edfa-0310-969c-e2dbd0fdcd60
14 years ago
oharboe
bb5f713e44
Gary Carlson <gcarlson@carlson-minot.com> config file
git-svn-id: svn://svn.berlios.de/openocd/trunk@2657 b42882b7-edfa-0310-969c-e2dbd0fdcd60
14 years ago
oharboe
0dd669f2a7
Ferdinand Postema <ferdinand@postema.eu> config script for the MMnet1001 module from Propox.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2656 b42882b7-edfa-0310-969c-e2dbd0fdcd60
14 years ago
oharboe
a5d02116a6
David Brownell <david-b@pacbell.net> The Stellaris eval boards don't have TRST signals, so
defining ntrst_delay is pointless; don't.
At least the LM3S3748 eval board doesn't need nsrst_delay
either; remove that too.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2645 b42882b7-edfa-0310-969c-e2dbd0fdcd60
14 years ago
oharboe
14f2189e1a
Ferdinand Postema <ferdinand@postema.eu> increase reset delay to fix regression from 2600 to 2604
git-svn-id: svn://svn.berlios.de/openocd/trunk@2614 b42882b7-edfa-0310-969c-e2dbd0fdcd60
14 years ago
oharboe
41bb41bb93
Brian Findlay <findlaybrian@gmail.com> finalize mini2440.cfg
git-svn-id: svn://svn.berlios.de/openocd/trunk@2611 b42882b7-edfa-0310-969c-e2dbd0fdcd60
14 years ago
oharboe
9df861b0c0
use cortex_a8 instead of cortex_m3
git-svn-id: svn://svn.berlios.de/openocd/trunk@2610 b42882b7-edfa-0310-969c-e2dbd0fdcd60
14 years ago
oharboe
6336ebb05c
Pieter Conradie <Pieter.Conradie@psitek.com> shuffle things around to the right spots. Should have been done in previous commit.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2604 b42882b7-edfa-0310-969c-e2dbd0fdcd60
14 years ago