You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

40 lines
989 B

  1. #daemon configuration
  2. telnet_port 4444
  3. gdb_port 3333
  4. # tell gdb our flash memory map
  5. # and enable flash programming
  6. gdb_memory_map enable
  7. gdb_flash_program enable
  8. #interface
  9. interface ft2232
  10. ft2232_device_desc "Amontec JTAGkey A"
  11. ft2232_layout jtagkey
  12. ft2232_vid_pid 0x0403 0xcff8
  13. jtag_speed 0
  14. jtag_nsrst_delay 200
  15. jtag_ntrst_delay 200
  16. #use combined on interfaces or targets that can't set TRST/SRST separately
  17. reset_config srst_only srst_pulls_trst
  18. #jtag scan chain
  19. jtag newtap sam7 cpu -irlen 4 -irmask 0xf
  20. #target configuration
  21. target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi
  22. [new_target_name] configure -work-area-virt 0 -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup false
  23. target_script 0 reset .\prj\sam7x256_reset.script
  24. #flash bank <driver> <base> <size> <chip_width> <bus_width>
  25. flash bank at91sam7 0 0 0 0 0
  26. # For more information about the configuration files,
  27. # look at the OpenOCD User's Guide.
  28. init
  29. reset halt