You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
|
-
- ## Chip:
- set CHIPNAME at91sam9260
- set CPUTAPID 0x0792603f
- set ENDIAN little
- source [find target/at91sam9260.cfg]
-
- $_TARGETNAME configure -event reset-init {at91sam_init}
-
-
- proc at91sam_init { } {
-
- # at reset chip runs at 32 kHz => 1/8 * 32 kHz = 4 kHz
- jtag_rclk 4
-
- # Enable user reset and disable watchdog
- mww 0xfffffd08 0xa5000501 ;# RSTC_MR : enable user reset
- mww 0xfffffd44 0x00008000 ;# WDT_MR : disable watchdog
-
- # Oscillator setup
- mww 0xfffffc20 0x00004001 ;# CKGR_MOR : enable the main oscillator (18.432 MHz)
- sleep 20 ;# wait 20 ms
- mww 0xfffffc30 0x00000001 ;# PMC_MCKR : switch to main oscillator
- sleep 10 ;# wait 10 ms
-
- # now we are running at 18.432 MHz kHz => 1/8 * 18.432 MHz = 2.304 MHz
- jtag_rclk 2000
-
- mww 0xfffffc28 0x2060bf09 ;# CKGR_PLLAR: Set PLLA Register for 198,656MHz
- sleep 20 ;# wait 20 ms
- mww 0xfffffc2c 0x207c3f0c ;# CKGR_PLLBR: Set PLLB Register for USB usage (USB_CLK = 48 MHz)
- sleep 10 ;# wait 10 ms
- mww 0xfffffc30 0x00000101 ;# PMC_MCKR : Select prescaler
- sleep 10 ;# wait 10 ms
- mww 0xfffffc30 0x00000102 ;# PMC_MCKR : Clock from PLLA is selected
- sleep 10 ;# wait 10 ms
-
- # now we are running at 198.656 MHz kHz => full speed jtag
- jtag_rclk 30000
-
- arm7_9 dcc_downloads enable ;# Enable faster DCC downloads
-
- # Configure PIO Controller for SDRAM data-lines D16-D31
- # PC16-PC31 = Peripheral A: D16-D32
- mww 0xfffff844 0xffff0000 ;# Interrupt Disable
- mww 0xfffff854 0xffff0000 ;# Multi-Drive Disable
- mww 0xfffff860 0xffff0000 ;# Pull-Up Disable
- mww 0xfffff870 0xffff0000 ;# PIO_ASR : Select peripheral A function for D15..D31
- mww 0xfffff804 0xffff0000 ;# PIO_PDR : Disable PIO function for D15..D31 (Peripheral function enable)
- mww 0xfffffc10 0x00000010 ;# Enable PIO-C Clock in PMC (PID=4)
-
- # SD-Ram setup
- mww 0xffffef1c 0x2 ;# EBI_CSA : Assign EBI Chip Select 1 to SDRAM
- mww 0xffffea08 0x85227259 ;# SDRAMC_CR : Configure SDRAM (IS42S32160A: 4M Words x 32 Bits x 4 Banks (512-Mbit))
- mww 0xffffea00 0x1 ;# SDRAMC_MR : issue a NOP command
- mww 0x20000000 0
- mww 0xffffea00 0x2 ;# SDRAMC_MR : issue an 'All Banks Precharge' command
- mww 0x20000000 0
- mww 0xffffea00 0x4 ;# SDRAMC_MR : issue an 'Auto-Refresh' command (1st)
- mww 0x20000000 0
- mww 0xffffea00 0x4 ;# SDRAMC_MR : issue an 'Auto-Refresh' command (2nd)
- mww 0x20000000 0
- mww 0xffffea00 0x4 ;# SDRAMC_MR : issue an 'Auto-Refresh' command (3th)
- mww 0x20000000 0
- mww 0xffffea00 0x4 ;# SDRAMC_MR : issue an 'Auto-Refresh' command (4th)
- mww 0x20000000 0
- mww 0xffffea00 0x4 ;# SDRAMC_MR : issue an 'Auto-Refresh' command (5th)
- mww 0x20000000 0
- mww 0xffffea00 0x4 ;# SDRAMC_MR : issue an 'Auto-Refresh' command (6th)
- mww 0x20000000 0
- mww 0xffffea00 0x4 ;# SDRAMC_MR : issue an 'Auto-Refresh' command (7th)
- mww 0x20000000 0
- mww 0xffffea00 0x4 ;# SDRAMC_MR : issue an 'Auto-Refresh' command (8th)
- mww 0x20000000 0
- mww 0xffffea00 0x3 ;# SDRAMC_MR : issue a 'Load Mode Register' command
- mww 0x20000000 0
- mww 0xffffea00 0x0 ;# SDRAMC_MR : Normal Mode
- mww 0x20000000 0
- mww 0xFFFFEA04 0x30d ;# SDRAM Refresh Time Register
- # datasheet: 8k refresh cycles / 64 ms
- # MCLK / (8*1024 / 64e-3) = 100e6 / 128000 = 781 = 0x30d
-
- }
|