You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

44 lines
1.2 KiB

  1. # script for str9
  2. # jtag speed. We need to stick to 16kHz until we've finished reset.
  3. jtag_rclk 16
  4. jtag_nsrst_delay 100
  5. jtag_ntrst_delay 100
  6. #use combined on interfaces or targets that can't set TRST/SRST separately
  7. reset_config trst_and_srst
  8. #jtag scan chain
  9. #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
  10. jtag_device 8 0x1 0x1 0xfe
  11. jtag_device 4 0x1 0xf 0xe
  12. jtag_device 5 0x1 0x1 0x1e
  13. target create target0 arm966e -endian little -chain-position 1 -variant arm966e
  14. [new_target_name] configure -event reset-start { jtag_rclk 16 }
  15. [new_target_name] configure -event reset-init {
  16. # We can increase speed now that we know the target is halted.
  17. jtag_rclk 3000
  18. # -- Enable 96K RAM
  19. # PFQBC enabled / DTCM & AHB wait-states disabled
  20. mww 0x5C002034 0x0191
  21. str9x flash_config 0 4 2 0 0x80000
  22. flash protect 0 0 7 off
  23. }
  24. [new_target_name] configure -work-area-virt 0 -work-area-phys 0x50000000 -work-area-size 16384 -work-area-backup 0
  25. #flash bank str9x <base> <size> 0 0 <target#> <variant>
  26. flash bank str9x 0x00000000 0x00080000 0 0 0
  27. flash bank str9x 0x00080000 0x00008000 0 0 0
  28. # For more information about the configuration files, take a look at:
  29. # openocd.texi