You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

1518 lines
62 KiB

  1. # Doxyfile 1.5.8
  2. # This file describes the settings to be used by the documentation system
  3. # doxygen (www.doxygen.org) for a project
  4. #
  5. # All text after a hash (#) is considered a comment and will be ignored
  6. # The format is:
  7. # TAG = value [value, ...]
  8. # For lists items can also be appended using:
  9. # TAG += value [value, ...]
  10. # Values that contain spaces should be placed between quotes (" ")
  11. #---------------------------------------------------------------------------
  12. # Project related configuration options
  13. #---------------------------------------------------------------------------
  14. # This tag specifies the encoding used for all characters in the config file
  15. # that follow. The default is UTF-8 which is also the encoding used for all
  16. # text before the first occurrence of this tag. Doxygen uses libiconv (or the
  17. # iconv built into libc) for the transcoding. See
  18. # http://www.gnu.org/software/libiconv for the list of possible encodings.
  19. DOXYFILE_ENCODING = UTF-8
  20. # The PROJECT_NAME tag is a single word (or a sequence of words surrounded
  21. # by quotes) that should identify the project.
  22. PROJECT_NAME = OpenOCD
  23. # The PROJECT_NUMBER tag can be used to enter a project or revision number.
  24. # This could be handy for archiving the generated documentation or
  25. # if some version control system is used.
  26. PROJECT_NUMBER =
  27. # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
  28. # base path where the generated documentation will be put.
  29. # If a relative path is entered, it will be relative to the location
  30. # where doxygen was started. If left blank the current directory will be used.
  31. OUTPUT_DIRECTORY = doxygen
  32. # If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
  33. # 4096 sub-directories (in 2 levels) under the output directory of each output
  34. # format and will distribute the generated files over these directories.
  35. # Enabling this option can be useful when feeding doxygen a huge amount of
  36. # source files, where putting all generated files in the same directory would
  37. # otherwise cause performance problems for the file system.
  38. CREATE_SUBDIRS = NO
  39. # The OUTPUT_LANGUAGE tag is used to specify the language in which all
  40. # documentation generated by doxygen is written. Doxygen will use this
  41. # information to generate all constant output in the proper language.
  42. # The default language is English, other supported languages are:
  43. # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
  44. # Croatian, Czech, Danish, Dutch, Farsi, Finnish, French, German, Greek,
  45. # Hungarian, Italian, Japanese, Japanese-en (Japanese with English messages),
  46. # Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, Polish,
  47. # Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak, Slovene,
  48. # Spanish, Swedish, and Ukrainian.
  49. OUTPUT_LANGUAGE = English
  50. # If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
  51. # include brief member descriptions after the members that are listed in
  52. # the file and class documentation (similar to JavaDoc).
  53. # Set to NO to disable this.
  54. BRIEF_MEMBER_DESC = YES
  55. # If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
  56. # the brief description of a member or function before the detailed description.
  57. # Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
  58. # brief descriptions will be completely suppressed.
  59. REPEAT_BRIEF = YES
  60. # This tag implements a quasi-intelligent brief description abbreviator
  61. # that is used to form the text in various listings. Each string
  62. # in this list, if found as the leading text of the brief description, will be
  63. # stripped from the text and the result after processing the whole list, is
  64. # used as the annotated text. Otherwise, the brief description is used as-is.
  65. # If left blank, the following values are used ("$name" is automatically
  66. # replaced with the name of the entity): "The $name class" "The $name widget"
  67. # "The $name file" "is" "provides" "specifies" "contains"
  68. # "represents" "a" "an" "the"
  69. ABBREVIATE_BRIEF =
  70. # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
  71. # Doxygen will generate a detailed section even if there is only a brief
  72. # description.
  73. ALWAYS_DETAILED_SEC = NO
  74. # If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
  75. # inherited members of a class in the documentation of that class as if those
  76. # members were ordinary class members. Constructors, destructors and assignment
  77. # operators of the base classes will not be shown.
  78. INLINE_INHERITED_MEMB = YES
  79. # If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
  80. # path before files name in the file list and in the header files. If set
  81. # to NO the shortest path that makes the file name unique will be used.
  82. FULL_PATH_NAMES = NO
  83. # If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
  84. # can be used to strip a user-defined part of the path. Stripping is
  85. # only done if one of the specified strings matches the left-hand part of
  86. # the path. The tag can be used to show relative paths in the file list.
  87. # If left blank the directory from which doxygen is run is used as the
  88. # path to strip.
  89. STRIP_FROM_PATH =
  90. # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
  91. # the path mentioned in the documentation of a class, which tells
  92. # the reader which header file to include in order to use a class.
  93. # If left blank only the name of the header file containing the class
  94. # definition is used. Otherwise one should specify the include paths that
  95. # are normally passed to the compiler using the -I flag.
  96. STRIP_FROM_INC_PATH =
  97. # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
  98. # (but less readable) file names. This can be useful is your file systems
  99. # doesn't support long names like on DOS, Mac, or CD-ROM.
  100. SHORT_NAMES = NO
  101. # If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
  102. # will interpret the first line (until the first dot) of a JavaDoc-style
  103. # comment as the brief description. If set to NO, the JavaDoc
  104. # comments will behave just like regular Qt-style comments
  105. # (thus requiring an explicit @brief command for a brief description.)
  106. JAVADOC_AUTOBRIEF = YES
  107. # If the QT_AUTOBRIEF tag is set to YES then Doxygen will
  108. # interpret the first line (until the first dot) of a Qt-style
  109. # comment as the brief description. If set to NO, the comments
  110. # will behave just like regular Qt-style comments (thus requiring
  111. # an explicit \brief command for a brief description.)
  112. QT_AUTOBRIEF = NO
  113. # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
  114. # treat a multi-line C++ special comment block (i.e. a block of //! or ///
  115. # comments) as a brief description. This used to be the default behaviour.
  116. # The new default is to treat a multi-line C++ comment block as a detailed
  117. # description. Set this tag to YES if you prefer the old behaviour instead.
  118. MULTILINE_CPP_IS_BRIEF = NO
  119. # If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
  120. # member inherits the documentation from any documented member that it
  121. # re-implements.
  122. INHERIT_DOCS = YES
  123. # If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
  124. # a new page for each member. If set to NO, the documentation of a member will
  125. # be part of the file/class/namespace that contains it.
  126. SEPARATE_MEMBER_PAGES = NO
  127. # The TAB_SIZE tag can be used to set the number of spaces in a tab.
  128. # Doxygen uses this value to replace tabs by spaces in code fragments.
  129. TAB_SIZE = 4
  130. # This tag can be used to specify a number of aliases that acts
  131. # as commands in the documentation. An alias has the form "name=value".
  132. # For example adding "sideeffect=\par Side Effects:\n" will allow you to
  133. # put the command \sideeffect (or @sideeffect) in the documentation, which
  134. # will result in a user-defined paragraph with heading "Side Effects:".
  135. # You can put \n's in the value part of an alias to insert newlines.
  136. ALIASES =
  137. # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
  138. # sources only. Doxygen will then generate output that is more tailored for C.
  139. # For instance, some of the names that are used will be different. The list
  140. # of all members will be omitted, etc.
  141. OPTIMIZE_OUTPUT_FOR_C = YES
  142. # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
  143. # sources only. Doxygen will then generate output that is more tailored for
  144. # Java. For instance, namespaces will be presented as packages, qualified
  145. # scopes will look different, etc.
  146. OPTIMIZE_OUTPUT_JAVA = NO
  147. # Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
  148. # sources only. Doxygen will then generate output that is more tailored for
  149. # Fortran.
  150. OPTIMIZE_FOR_FORTRAN = NO
  151. # Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
  152. # sources. Doxygen will then generate output that is tailored for
  153. # VHDL.
  154. OPTIMIZE_OUTPUT_VHDL = NO
  155. # Doxygen selects the parser to use depending on the extension of the files it parses.
  156. # With this tag you can assign which parser to use for a given extension.
  157. # Doxygen has a built-in mapping, but you can override or extend it using this tag.
  158. # The format is ext=language, where ext is a file extension, and language is one of
  159. # the parsers supported by doxygen: IDL, Java, Javascript, C#, C, C++, D, PHP,
  160. # Objective-C, Python, Fortran, VHDL, C, C++. For instance to make doxygen treat
  161. # .inc files as Fortran files (default is PHP), and .f files as C (default is Fortran),
  162. # use: inc=Fortran f=C
  163. EXTENSION_MAPPING =
  164. # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
  165. # to include (a tag file for) the STL sources as input, then you should
  166. # set this tag to YES in order to let doxygen match functions declarations and
  167. # definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
  168. # func(std::string) {}). This also make the inheritance and collaboration
  169. # diagrams that involve STL classes more complete and accurate.
  170. BUILTIN_STL_SUPPORT = NO
  171. # If you use Microsoft's C++/CLI language, you should set this option to YES to
  172. # enable parsing support.
  173. CPP_CLI_SUPPORT = NO
  174. # Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
  175. # Doxygen will parse them like normal C++ but will assume all classes use public
  176. # instead of private inheritance when no explicit protection keyword is present.
  177. SIP_SUPPORT = NO
  178. # For Microsoft's IDL there are propget and propput attributes to indicate getter
  179. # and setter methods for a property. Setting this option to YES (the default)
  180. # will make doxygen to replace the get and set methods by a property in the
  181. # documentation. This will only work if the methods are indeed getting or
  182. # setting a simple type. If this is not the case, or you want to show the
  183. # methods anyway, you should set this option to NO.
  184. IDL_PROPERTY_SUPPORT = NO
  185. # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
  186. # tag is set to YES, then doxygen will reuse the documentation of the first
  187. # member in the group (if any) for the other members of the group. By default
  188. # all members of a group must be documented explicitly.
  189. DISTRIBUTE_GROUP_DOC = NO
  190. # Set the SUBGROUPING tag to YES (the default) to allow class member groups of
  191. # the same type (for instance a group of public functions) to be put as a
  192. # subgroup of that type (e.g. under the Public Functions section). Set it to
  193. # NO to prevent subgrouping. Alternatively, this can be done per class using
  194. # the \nosubgrouping command.
  195. SUBGROUPING = YES
  196. # When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
  197. # is documented as struct, union, or enum with the name of the typedef. So
  198. # typedef struct TypeS {} TypeT, will appear in the documentation as a struct
  199. # with name TypeT. When disabled the typedef will appear as a member of a file,
  200. # namespace, or class. And the struct will be named TypeS. This can typically
  201. # be useful for C code in case the coding convention dictates that all compound
  202. # types are typedef'ed and only the typedef is referenced, never the tag name.
  203. TYPEDEF_HIDES_STRUCT = NO
  204. # The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
  205. # determine which symbols to keep in memory and which to flush to disk.
  206. # When the cache is full, less often used symbols will be written to disk.
  207. # For small to medium size projects (<1000 input files) the default value is
  208. # probably good enough. For larger projects a too small cache size can cause
  209. # doxygen to be busy swapping symbols to and from disk most of the time
  210. # causing a significant performance penality.
  211. # If the system has enough physical memory increasing the cache will improve the
  212. # performance by keeping more symbols in memory. Note that the value works on
  213. # a logarithmic scale so increasing the size by one will rougly double the
  214. # memory usage. The cache size is given by this formula:
  215. # 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
  216. # corresponding to a cache size of 2^16 = 65536 symbols
  217. SYMBOL_CACHE_SIZE = 0
  218. #---------------------------------------------------------------------------
  219. # Build related configuration options
  220. #---------------------------------------------------------------------------
  221. # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
  222. # documentation are documented, even if no documentation was available.
  223. # Private class members and static file members will be hidden unless
  224. # the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
  225. EXTRACT_ALL = YES
  226. # If the EXTRACT_PRIVATE tag is set to YES all private members of a class
  227. # will be included in the documentation.
  228. EXTRACT_PRIVATE = NO
  229. # If the EXTRACT_STATIC tag is set to YES all static members of a file
  230. # will be included in the documentation.
  231. EXTRACT_STATIC = YES
  232. # If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
  233. # defined locally in source files will be included in the documentation.
  234. # If set to NO only classes defined in header files are included.
  235. EXTRACT_LOCAL_CLASSES = YES
  236. # This flag is only useful for Objective-C code. When set to YES local
  237. # methods, which are defined in the implementation section but not in
  238. # the interface are included in the documentation.
  239. # If set to NO (the default) only methods in the interface are included.
  240. EXTRACT_LOCAL_METHODS = NO
  241. # If this flag is set to YES, the members of anonymous namespaces will be
  242. # extracted and appear in the documentation as a namespace called
  243. # 'anonymous_namespace{file}', where file will be replaced with the base
  244. # name of the file that contains the anonymous namespace. By default
  245. # anonymous namespace are hidden.
  246. EXTRACT_ANON_NSPACES = NO
  247. # If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
  248. # undocumented members of documented classes, files or namespaces.
  249. # If set to NO (the default) these members will be included in the
  250. # various overviews, but no documentation section is generated.
  251. # This option has no effect if EXTRACT_ALL is enabled.
  252. HIDE_UNDOC_MEMBERS = NO
  253. # If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
  254. # undocumented classes that are normally visible in the class hierarchy.
  255. # If set to NO (the default) these classes will be included in the various
  256. # overviews. This option has no effect if EXTRACT_ALL is enabled.
  257. HIDE_UNDOC_CLASSES = NO
  258. # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
  259. # friend (class|struct|union) declarations.
  260. # If set to NO (the default) these declarations will be included in the
  261. # documentation.
  262. HIDE_FRIEND_COMPOUNDS = NO
  263. # If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
  264. # documentation blocks found inside the body of a function.
  265. # If set to NO (the default) these blocks will be appended to the
  266. # function's detailed documentation block.
  267. HIDE_IN_BODY_DOCS = NO
  268. # The INTERNAL_DOCS tag determines if documentation
  269. # that is typed after a \internal command is included. If the tag is set
  270. # to NO (the default) then the documentation will be excluded.
  271. # Set it to YES to include the internal documentation.
  272. INTERNAL_DOCS = NO
  273. # If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
  274. # file names in lower-case letters. If set to YES upper-case letters are also
  275. # allowed. This is useful if you have classes or files whose names only differ
  276. # in case and if your file system supports case sensitive file names. Windows
  277. # and Mac users are advised to set this option to NO.
  278. CASE_SENSE_NAMES = YES
  279. # If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
  280. # will show members with their full class and namespace scopes in the
  281. # documentation. If set to YES the scope will be hidden.
  282. HIDE_SCOPE_NAMES = NO
  283. # If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
  284. # will put a list of the files that are included by a file in the documentation
  285. # of that file.
  286. SHOW_INCLUDE_FILES = NO
  287. # If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
  288. # is inserted in the documentation for inline members.
  289. INLINE_INFO = YES
  290. # If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
  291. # will sort the (detailed) documentation of file and class members
  292. # alphabetically by member name. If set to NO the members will appear in
  293. # declaration order.
  294. SORT_MEMBER_DOCS = YES
  295. # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
  296. # brief documentation of file, namespace and class members alphabetically
  297. # by member name. If set to NO (the default) the members will appear in
  298. # declaration order.
  299. SORT_BRIEF_DOCS = YES
  300. # If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
  301. # hierarchy of group names into alphabetical order. If set to NO (the default)
  302. # the group names will appear in their defined order.
  303. SORT_GROUP_NAMES = NO
  304. # If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
  305. # sorted by fully-qualified names, including namespaces. If set to
  306. # NO (the default), the class list will be sorted only by class name,
  307. # not including the namespace part.
  308. # Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
  309. # Note: This option applies only to the class list, not to the
  310. # alphabetical list.
  311. SORT_BY_SCOPE_NAME = NO
  312. # The GENERATE_TODOLIST tag can be used to enable (YES) or
  313. # disable (NO) the todo list. This list is created by putting \todo
  314. # commands in the documentation.
  315. GENERATE_TODOLIST = YES
  316. # The GENERATE_TESTLIST tag can be used to enable (YES) or
  317. # disable (NO) the test list. This list is created by putting \test
  318. # commands in the documentation.
  319. GENERATE_TESTLIST = YES
  320. # The GENERATE_BUGLIST tag can be used to enable (YES) or
  321. # disable (NO) the bug list. This list is created by putting \bug
  322. # commands in the documentation.
  323. GENERATE_BUGLIST = YES
  324. # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
  325. # disable (NO) the deprecated list. This list is created by putting
  326. # \deprecated commands in the documentation.
  327. GENERATE_DEPRECATEDLIST= YES
  328. # The ENABLED_SECTIONS tag can be used to enable conditional
  329. # documentation sections, marked by \if sectionname ... \endif.
  330. ENABLED_SECTIONS =
  331. # The MAX_INITIALIZER_LINES tag determines the maximum number of lines
  332. # the initial value of a variable or define consists of for it to appear in
  333. # the documentation. If the initializer consists of more lines than specified
  334. # here it will be hidden. Use a value of 0 to hide initializers completely.
  335. # The appearance of the initializer of individual variables and defines in the
  336. # documentation can be controlled using \showinitializer or \hideinitializer
  337. # command in the documentation regardless of this setting.
  338. MAX_INITIALIZER_LINES = 30
  339. # Set the SHOW_USED_FILES tag to NO to disable the list of files generated
  340. # at the bottom of the documentation of classes and structs. If set to YES the
  341. # list will mention the files that were used to generate the documentation.
  342. SHOW_USED_FILES = YES
  343. # If the sources in your project are distributed over multiple directories
  344. # then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
  345. # in the documentation. The default is NO.
  346. SHOW_DIRECTORIES = YES
  347. # Set the SHOW_FILES tag to NO to disable the generation of the Files page.
  348. # This will remove the Files entry from the Quick Index and from the
  349. # Folder Tree View (if specified). The default is YES.
  350. SHOW_FILES = YES
  351. # Set the SHOW_NAMESPACES tag to NO to disable the generation of the
  352. # Namespaces page.
  353. # This will remove the Namespaces entry from the Quick Index
  354. # and from the Folder Tree View (if specified). The default is YES.
  355. SHOW_NAMESPACES = YES
  356. # The FILE_VERSION_FILTER tag can be used to specify a program or script that
  357. # doxygen should invoke to get the current version for each file (typically from
  358. # the version control system). Doxygen will invoke the program by executing (via
  359. # popen()) the command <command> <input-file>, where <command> is the value of
  360. # the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
  361. # provided by doxygen. Whatever the program writes to standard output
  362. # is used as the file version. See the manual for examples.
  363. FILE_VERSION_FILTER =
  364. # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed by
  365. # doxygen. The layout file controls the global structure of the generated output files
  366. # in an output format independent way. The create the layout file that represents
  367. # doxygen's defaults, run doxygen with the -l option. You can optionally specify a
  368. # file name after the option, if omitted DoxygenLayout.xml will be used as the name
  369. # of the layout file.
  370. LAYOUT_FILE =
  371. #---------------------------------------------------------------------------
  372. # configuration options related to warning and progress messages
  373. #---------------------------------------------------------------------------
  374. # The QUIET tag can be used to turn on/off the messages that are generated
  375. # by doxygen. Possible values are YES and NO. If left blank NO is used.
  376. QUIET = NO
  377. # The WARNINGS tag can be used to turn on/off the warning messages that are
  378. # generated by doxygen. Possible values are YES and NO. If left blank
  379. # NO is used.
  380. WARNINGS = YES
  381. # If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
  382. # for undocumented members. If EXTRACT_ALL is set to YES then this flag will
  383. # automatically be disabled.
  384. WARN_IF_UNDOCUMENTED = YES
  385. # If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
  386. # potential errors in the documentation, such as not documenting some
  387. # parameters in a documented function, or documenting parameters that
  388. # don't exist or using markup commands wrongly.
  389. WARN_IF_DOC_ERROR = YES
  390. # This WARN_NO_PARAMDOC option can be abled to get warnings for
  391. # functions that are documented, but have no documentation for their parameters
  392. # or return value. If set to NO (the default) doxygen will only warn about
  393. # wrong or incomplete parameter documentation, but not about the absence of
  394. # documentation.
  395. WARN_NO_PARAMDOC = NO
  396. # The WARN_FORMAT tag determines the format of the warning messages that
  397. # doxygen can produce. The string should contain the $file, $line, and $text
  398. # tags, which will be replaced by the file and line number from which the
  399. # warning originated and the warning text. Optionally the format may contain
  400. # $version, which will be replaced by the version of the file (if it could
  401. # be obtained via FILE_VERSION_FILTER)
  402. WARN_FORMAT = "$file:$line: $text "
  403. # The WARN_LOGFILE tag can be used to specify a file to which warning
  404. # and error messages should be written. If left blank the output is written
  405. # to stderr.
  406. WARN_LOGFILE =
  407. #---------------------------------------------------------------------------
  408. # configuration options related to the input files
  409. #---------------------------------------------------------------------------
  410. # The INPUT tag can be used to specify the files and/or directories that contain
  411. # documented source files. You may enter file names like "myfile.cpp" or
  412. # directories like "/usr/src/myproject". Separate the files or directories
  413. # with spaces.
  414. INPUT = @srcdir@/doc/manual \
  415. @srcdir@/TODO \
  416. @srcdir@/BUGS \
  417. @srcdir@/HACKING \
  418. @srcdir@/src \
  419. @builddir@/config.h
  420. # This tag can be used to specify the character encoding of the source files
  421. # that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
  422. # also the default input encoding. Doxygen uses libiconv (or the iconv built
  423. # into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
  424. # the list of possible encodings.
  425. INPUT_ENCODING = UTF-8
  426. # If the value of the INPUT tag contains directories, you can use the
  427. # FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
  428. # and *.h) to filter out the source-files in the directories. If left
  429. # blank the following patterns are tested:
  430. # *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
  431. # *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
  432. FILE_PATTERNS = *.h \
  433. *.c \
  434. *.txt
  435. # The RECURSIVE tag can be used to turn specify whether or not subdirectories
  436. # should be searched for input files as well. Possible values are YES and NO.
  437. # If left blank NO is used.
  438. RECURSIVE = YES
  439. # The EXCLUDE tag can be used to specify files and/or directories that should
  440. # excluded from the INPUT source files. This way you can easily exclude a
  441. # subdirectory from a directory tree whose root is specified with the INPUT tag.
  442. EXCLUDE =
  443. # The EXCLUDE_SYMLINKS tag can be used select whether or not files or
  444. # directories that are symbolic links (a Unix filesystem feature) are excluded
  445. # from the input.
  446. EXCLUDE_SYMLINKS = NO
  447. # If the value of the INPUT tag contains directories, you can use the
  448. # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
  449. # certain files from those directories. Note that the wildcards are matched
  450. # against the file with absolute path, so to exclude all test directories
  451. # for example use the pattern */test/*
  452. EXCLUDE_PATTERNS =
  453. # The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
  454. # (namespaces, classes, functions, etc.) that should be excluded from the
  455. # output. The symbol name can be a fully qualified name, a word, or if the
  456. # wildcard * is used, a substring. Examples: ANamespace, AClass,
  457. # AClass::ANamespace, ANamespace::*Test
  458. EXCLUDE_SYMBOLS =
  459. # The EXAMPLE_PATH tag can be used to specify one or more files or
  460. # directories that contain example code fragments that are included (see
  461. # the \include command).
  462. EXAMPLE_PATH =
  463. # If the value of the EXAMPLE_PATH tag contains directories, you can use the
  464. # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
  465. # and *.h) to filter out the source-files in the directories. If left
  466. # blank all files are included.
  467. EXAMPLE_PATTERNS =
  468. # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
  469. # searched for input files to be used with the \include or \dontinclude
  470. # commands irrespective of the value of the RECURSIVE tag.
  471. # Possible values are YES and NO. If left blank NO is used.
  472. EXAMPLE_RECURSIVE = NO
  473. # The IMAGE_PATH tag can be used to specify one or more files or
  474. # directories that contain image that are included in the documentation (see
  475. # the \image command).
  476. IMAGE_PATH = @srcdir@/doc/manual/images
  477. # The INPUT_FILTER tag can be used to specify a program that doxygen should
  478. # invoke to filter for each input file. Doxygen will invoke the filter program
  479. # by executing (via popen()) the command <filter> <input-file>, where <filter>
  480. # is the value of the INPUT_FILTER tag, and <input-file> is the name of an
  481. # input file. Doxygen will then use the output that the filter program writes
  482. # to standard output.
  483. # If FILTER_PATTERNS is specified, this tag will be
  484. # ignored.
  485. INPUT_FILTER =
  486. # The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
  487. # basis.
  488. # Doxygen will compare the file name with each pattern and apply the
  489. # filter if there is a match.
  490. # The filters are a list of the form:
  491. # pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
  492. # info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
  493. # is applied to all files.
  494. FILTER_PATTERNS =
  495. # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
  496. # INPUT_FILTER) will be used to filter the input files when producing source
  497. # files to browse (i.e. when SOURCE_BROWSER is set to YES).
  498. FILTER_SOURCE_FILES = NO
  499. #---------------------------------------------------------------------------
  500. # configuration options related to source browsing
  501. #---------------------------------------------------------------------------
  502. # If the SOURCE_BROWSER tag is set to YES then a list of source files will
  503. # be generated. Documented entities will be cross-referenced with these sources.
  504. # Note: To get rid of all source code in the generated output, make sure also
  505. # VERBATIM_HEADERS is set to NO.
  506. SOURCE_BROWSER = YES
  507. # Setting the INLINE_SOURCES tag to YES will include the body
  508. # of functions and classes directly in the documentation.
  509. INLINE_SOURCES = NO
  510. # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
  511. # doxygen to hide any special comment blocks from generated source code
  512. # fragments. Normal C and C++ comments will always remain visible.
  513. STRIP_CODE_COMMENTS = YES
  514. # If the REFERENCED_BY_RELATION tag is set to YES
  515. # then for each documented function all documented
  516. # functions referencing it will be listed.
  517. REFERENCED_BY_RELATION = YES
  518. # If the REFERENCES_RELATION tag is set to YES
  519. # then for each documented function all documented entities
  520. # called/used by that function will be listed.
  521. REFERENCES_RELATION = YES
  522. # If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
  523. # and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
  524. # functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
  525. # link to the source code.
  526. # Otherwise they will link to the documentation.
  527. REFERENCES_LINK_SOURCE = YES
  528. # If the USE_HTAGS tag is set to YES then the references to source code
  529. # will point to the HTML generated by the htags(1) tool instead of doxygen
  530. # built-in source browser. The htags tool is part of GNU's global source
  531. # tagging system (see http://www.gnu.org/software/global/global.html). You
  532. # will need version 4.8.6 or higher.
  533. USE_HTAGS = NO
  534. # If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
  535. # will generate a verbatim copy of the header file for each class for
  536. # which an include is specified. Set to NO to disable this.
  537. VERBATIM_HEADERS = YES
  538. #---------------------------------------------------------------------------
  539. # configuration options related to the alphabetical class index
  540. #---------------------------------------------------------------------------
  541. # If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
  542. # of all compounds will be generated. Enable this if the project
  543. # contains a lot of classes, structs, unions or interfaces.
  544. ALPHABETICAL_INDEX = YES
  545. # If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
  546. # the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
  547. # in which this list will be split (can be a number in the range [1..20])
  548. COLS_IN_ALPHA_INDEX = 5
  549. # In case all classes in a project start with a common prefix, all
  550. # classes will be put under the same header in the alphabetical index.
  551. # The IGNORE_PREFIX tag can be used to specify one or more prefixes that
  552. # should be ignored while generating the index headers.
  553. IGNORE_PREFIX =
  554. #---------------------------------------------------------------------------
  555. # configuration options related to the HTML output
  556. #---------------------------------------------------------------------------
  557. # If the GENERATE_HTML tag is set to YES (the default) Doxygen will
  558. # generate HTML output.
  559. GENERATE_HTML = @doxygen_as_html@
  560. # The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
  561. # If a relative path is entered the value of OUTPUT_DIRECTORY will be
  562. # put in front of it. If left blank `html' will be used as the default path.
  563. HTML_OUTPUT = html
  564. # The HTML_FILE_EXTENSION tag can be used to specify the file extension for
  565. # each generated HTML page (for example: .htm,.php,.asp). If it is left blank
  566. # doxygen will generate files with .html extension.
  567. HTML_FILE_EXTENSION = .html
  568. # The HTML_HEADER tag can be used to specify a personal HTML header for
  569. # each generated HTML page. If it is left blank doxygen will generate a
  570. # standard header.
  571. HTML_HEADER =
  572. # The HTML_FOOTER tag can be used to specify a personal HTML footer for
  573. # each generated HTML page. If it is left blank doxygen will generate a
  574. # standard footer.
  575. HTML_FOOTER =
  576. # The HTML_STYLESHEET tag can be used to specify a user-defined cascading
  577. # style sheet that is used by each HTML page. It can be used to
  578. # fine-tune the look of the HTML output. If the tag is left blank doxygen
  579. # will generate a default style sheet. Note that doxygen will try to copy
  580. # the style sheet file to the HTML output directory, so don't put your own
  581. # stylesheet in the HTML output directory as well, or it will be erased!
  582. HTML_STYLESHEET =
  583. # If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
  584. # files or namespaces will be aligned in HTML using tables. If set to
  585. # NO a bullet list will be used.
  586. HTML_ALIGN_MEMBERS = YES
  587. # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
  588. # documentation will contain sections that can be hidden and shown after the
  589. # page has loaded. For this to work a browser that supports
  590. # JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
  591. # Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
  592. HTML_DYNAMIC_SECTIONS = NO
  593. # If the GENERATE_DOCSET tag is set to YES, additional index files
  594. # will be generated that can be used as input for Apple's Xcode 3
  595. # integrated development environment, introduced with OSX 10.5 (Leopard).
  596. # To create a documentation set, doxygen will generate a Makefile in the
  597. # HTML output directory. Running make will produce the docset in that
  598. # directory and running "make install" will install the docset in
  599. # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
  600. # it at startup.
  601. # See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html for more information.
  602. GENERATE_DOCSET = NO
  603. # When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
  604. # feed. A documentation feed provides an umbrella under which multiple
  605. # documentation sets from a single provider (such as a company or product suite)
  606. # can be grouped.
  607. DOCSET_FEEDNAME = "Doxygen generated docs"
  608. # When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
  609. # should uniquely identify the documentation set bundle. This should be a
  610. # reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
  611. # will append .docset to the name.
  612. DOCSET_BUNDLE_ID = org.doxygen.Project
  613. # If the GENERATE_HTMLHELP tag is set to YES, additional index files
  614. # will be generated that can be used as input for tools like the
  615. # Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
  616. # of the generated HTML documentation.
  617. GENERATE_HTMLHELP = NO
  618. # If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
  619. # be used to specify the file name of the resulting .chm file. You
  620. # can add a path in front of the file if the result should not be
  621. # written to the html output directory.
  622. CHM_FILE =
  623. # If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
  624. # be used to specify the location (absolute path including file name) of
  625. # the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
  626. # the HTML help compiler on the generated index.hhp.
  627. HHC_LOCATION =
  628. # If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
  629. # controls if a separate .chi index file is generated (YES) or that
  630. # it should be included in the master .chm file (NO).
  631. GENERATE_CHI = NO
  632. # If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
  633. # is used to encode HtmlHelp index (hhk), content (hhc) and project file
  634. # content.
  635. CHM_INDEX_ENCODING =
  636. # If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
  637. # controls whether a binary table of contents is generated (YES) or a
  638. # normal table of contents (NO) in the .chm file.
  639. BINARY_TOC = NO
  640. # The TOC_EXPAND flag can be set to YES to add extra items for group members
  641. # to the contents of the HTML help documentation and to the tree view.
  642. TOC_EXPAND = NO
  643. # If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and QHP_VIRTUAL_FOLDER
  644. # are set, an additional index file will be generated that can be used as input for
  645. # Qt's qhelpgenerator to generate a Qt Compressed Help (.qch) of the generated
  646. # HTML documentation.
  647. GENERATE_QHP = NO
  648. # If the QHG_LOCATION tag is specified, the QCH_FILE tag can
  649. # be used to specify the file name of the resulting .qch file.
  650. # The path specified is relative to the HTML output folder.
  651. QCH_FILE =
  652. # The QHP_NAMESPACE tag specifies the namespace to use when generating
  653. # Qt Help Project output. For more information please see
  654. # http://doc.trolltech.com/qthelpproject.html#namespace
  655. QHP_NAMESPACE =
  656. # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
  657. # Qt Help Project output. For more information please see
  658. # http://doc.trolltech.com/qthelpproject.html#virtual-folders
  659. QHP_VIRTUAL_FOLDER = doc
  660. # If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to add.
  661. # For more information please see
  662. # http://doc.trolltech.com/qthelpproject.html#custom-filters
  663. QHP_CUST_FILTER_NAME =
  664. # The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the custom filter to add.For more information please see
  665. # <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">Qt Help Project / Custom Filters</a>.
  666. QHP_CUST_FILTER_ATTRS =
  667. # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this project's
  668. # filter section matches.
  669. # <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">Qt Help Project / Filter Attributes</a>.
  670. QHP_SECT_FILTER_ATTRS =
  671. # If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
  672. # be used to specify the location of Qt's qhelpgenerator.
  673. # If non-empty doxygen will try to run qhelpgenerator on the generated
  674. # .qhp file.
  675. QHG_LOCATION =
  676. # The DISABLE_INDEX tag can be used to turn on/off the condensed index at
  677. # top of each HTML page. The value NO (the default) enables the index and
  678. # the value YES disables it.
  679. DISABLE_INDEX = NO
  680. # This tag can be used to set the number of enum values (range [1..20])
  681. # that doxygen will group on one line in the generated HTML documentation.
  682. ENUM_VALUES_PER_LINE = 4
  683. # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
  684. # structure should be generated to display hierarchical information.
  685. # If the tag value is set to FRAME, a side panel will be generated
  686. # containing a tree-like index structure (just like the one that
  687. # is generated for HTML Help). For this to work a browser that supports
  688. # JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+,
  689. # Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are
  690. # probably better off using the HTML help feature. Other possible values
  691. # for this tag are: HIERARCHIES, which will generate the Groups, Directories,
  692. # and Class Hierarchy pages using a tree view instead of an ordered list;
  693. # ALL, which combines the behavior of FRAME and HIERARCHIES; and NONE, which
  694. # disables this behavior completely. For backwards compatibility with previous
  695. # releases of Doxygen, the values YES and NO are equivalent to FRAME and NONE
  696. # respectively.
  697. GENERATE_TREEVIEW = YES
  698. # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
  699. # used to set the initial width (in pixels) of the frame in which the tree
  700. # is shown.
  701. TREEVIEW_WIDTH = 250
  702. # Use this tag to change the font size of Latex formulas included
  703. # as images in the HTML documentation. The default is 10. Note that
  704. # when you change the font size after a successful doxygen run you need
  705. # to manually remove any form_*.png images from the HTML output directory
  706. # to force them to be regenerated.
  707. FORMULA_FONTSIZE = 10
  708. #---------------------------------------------------------------------------
  709. # configuration options related to the LaTeX output
  710. #---------------------------------------------------------------------------
  711. # If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
  712. # generate Latex output.
  713. GENERATE_LATEX = @doxygen_as_pdf@
  714. # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
  715. # If a relative path is entered the value of OUTPUT_DIRECTORY will be
  716. # put in front of it. If left blank `latex' will be used as the default path.
  717. LATEX_OUTPUT = latex
  718. # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
  719. # invoked. If left blank `latex' will be used as the default command name.
  720. LATEX_CMD_NAME = pdflatex
  721. # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
  722. # generate index for LaTeX. If left blank `makeindex' will be used as the
  723. # default command name.
  724. MAKEINDEX_CMD_NAME = makeindex
  725. # If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
  726. # LaTeX documents. This may be useful for small projects and may help to
  727. # save some trees in general.
  728. COMPACT_LATEX = YES
  729. # The PAPER_TYPE tag can be used to set the paper type that is used
  730. # by the printer. Possible values are: a4, a4wide, letter, legal and
  731. # executive. If left blank a4wide will be used.
  732. PAPER_TYPE = a4wide
  733. # The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
  734. # packages that should be included in the LaTeX output.
  735. EXTRA_PACKAGES =
  736. # The LATEX_HEADER tag can be used to specify a personal LaTeX header for
  737. # the generated latex document. The header should contain everything until
  738. # the first chapter. If it is left blank doxygen will generate a
  739. # standard header. Notice: only use this tag if you know what you are doing!
  740. LATEX_HEADER =
  741. # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
  742. # is prepared for conversion to pdf (using ps2pdf). The pdf file will
  743. # contain links (just like the HTML output) instead of page references
  744. # This makes the output suitable for online browsing using a pdf viewer.
  745. PDF_HYPERLINKS = YES
  746. # If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
  747. # plain latex in the generated Makefile. Set this option to YES to get a
  748. # higher quality PDF documentation.
  749. USE_PDFLATEX = YES
  750. # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
  751. # command to the generated LaTeX files. This will instruct LaTeX to keep
  752. # running if errors occur, instead of asking the user for help.
  753. # This option is also used when generating formulas in HTML.
  754. LATEX_BATCHMODE = YES
  755. # If LATEX_HIDE_INDICES is set to YES then doxygen will not
  756. # include the index chapters (such as File Index, Compound Index, etc.)
  757. # in the output.
  758. LATEX_HIDE_INDICES = NO
  759. #---------------------------------------------------------------------------
  760. # configuration options related to the RTF output
  761. #---------------------------------------------------------------------------
  762. # If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
  763. # The RTF output is optimized for Word 97 and may not look very pretty with
  764. # other RTF readers or editors.
  765. GENERATE_RTF = NO
  766. # The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
  767. # If a relative path is entered the value of OUTPUT_DIRECTORY will be
  768. # put in front of it. If left blank `rtf' will be used as the default path.
  769. RTF_OUTPUT = rtf
  770. # If the COMPACT_RTF tag is set to YES Doxygen generates more compact
  771. # RTF documents. This may be useful for small projects and may help to
  772. # save some trees in general.
  773. COMPACT_RTF = NO
  774. # If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
  775. # will contain hyperlink fields. The RTF file will
  776. # contain links (just like the HTML output) instead of page references.
  777. # This makes the output suitable for online browsing using WORD or other
  778. # programs which support those fields.
  779. # Note: wordpad (write) and others do not support links.
  780. RTF_HYPERLINKS = NO
  781. # Load stylesheet definitions from file. Syntax is similar to doxygen's
  782. # config file, i.e. a series of assignments. You only have to provide
  783. # replacements, missing definitions are set to their default value.
  784. RTF_STYLESHEET_FILE =
  785. # Set optional variables used in the generation of an rtf document.
  786. # Syntax is similar to doxygen's config file.
  787. RTF_EXTENSIONS_FILE =
  788. #---------------------------------------------------------------------------
  789. # configuration options related to the man page output
  790. #---------------------------------------------------------------------------
  791. # If the GENERATE_MAN tag is set to YES (the default) Doxygen will
  792. # generate man pages
  793. GENERATE_MAN = NO
  794. # The MAN_OUTPUT tag is used to specify where the man pages will be put.
  795. # If a relative path is entered the value of OUTPUT_DIRECTORY will be
  796. # put in front of it. If left blank `man' will be used as the default path.
  797. MAN_OUTPUT = man
  798. # The MAN_EXTENSION tag determines the extension that is added to
  799. # the generated man pages (default is the subroutine's section .3)
  800. MAN_EXTENSION = .3
  801. # If the MAN_LINKS tag is set to YES and Doxygen generates man output,
  802. # then it will generate one additional man file for each entity
  803. # documented in the real man page(s). These additional files
  804. # only source the real man page, but without them the man command
  805. # would be unable to find the correct page. The default is NO.
  806. MAN_LINKS = NO
  807. #---------------------------------------------------------------------------
  808. # configuration options related to the XML output
  809. #---------------------------------------------------------------------------
  810. # If the GENERATE_XML tag is set to YES Doxygen will
  811. # generate an XML file that captures the structure of
  812. # the code including all documentation.
  813. GENERATE_XML = NO
  814. # The XML_OUTPUT tag is used to specify where the XML pages will be put.
  815. # If a relative path is entered the value of OUTPUT_DIRECTORY will be
  816. # put in front of it. If left blank `xml' will be used as the default path.
  817. XML_OUTPUT = xml
  818. # The XML_SCHEMA tag can be used to specify an XML schema,
  819. # which can be used by a validating XML parser to check the
  820. # syntax of the XML files.
  821. XML_SCHEMA =
  822. # The XML_DTD tag can be used to specify an XML DTD,
  823. # which can be used by a validating XML parser to check the
  824. # syntax of the XML files.
  825. XML_DTD =
  826. # If the XML_PROGRAMLISTING tag is set to YES Doxygen will
  827. # dump the program listings (including syntax highlighting
  828. # and cross-referencing information) to the XML output. Note that
  829. # enabling this will significantly increase the size of the XML output.
  830. XML_PROGRAMLISTING = YES
  831. #---------------------------------------------------------------------------
  832. # configuration options for the AutoGen Definitions output
  833. #---------------------------------------------------------------------------
  834. # If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
  835. # generate an AutoGen Definitions (see autogen.sf.net) file
  836. # that captures the structure of the code including all
  837. # documentation. Note that this feature is still experimental
  838. # and incomplete at the moment.
  839. GENERATE_AUTOGEN_DEF = NO
  840. #---------------------------------------------------------------------------
  841. # configuration options related to the Perl module output
  842. #---------------------------------------------------------------------------
  843. # If the GENERATE_PERLMOD tag is set to YES Doxygen will
  844. # generate a Perl module file that captures the structure of
  845. # the code including all documentation. Note that this
  846. # feature is still experimental and incomplete at the
  847. # moment.
  848. GENERATE_PERLMOD = NO
  849. # If the PERLMOD_LATEX tag is set to YES Doxygen will generate
  850. # the necessary Makefile rules, Perl scripts and LaTeX code to be able
  851. # to generate PDF and DVI output from the Perl module output.
  852. PERLMOD_LATEX = NO
  853. # If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
  854. # nicely formatted so it can be parsed by a human reader.
  855. # This is useful
  856. # if you want to understand what is going on.
  857. # On the other hand, if this
  858. # tag is set to NO the size of the Perl module output will be much smaller
  859. # and Perl will parse it just the same.
  860. PERLMOD_PRETTY = YES
  861. # The names of the make variables in the generated doxyrules.make file
  862. # are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
  863. # This is useful so different doxyrules.make files included by the same
  864. # Makefile don't overwrite each other's variables.
  865. PERLMOD_MAKEVAR_PREFIX =
  866. #---------------------------------------------------------------------------
  867. # Configuration options related to the preprocessor
  868. #---------------------------------------------------------------------------
  869. # If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
  870. # evaluate all C-preprocessor directives found in the sources and include
  871. # files.
  872. ENABLE_PREPROCESSING = YES
  873. # If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
  874. # names in the source code. If set to NO (the default) only conditional
  875. # compilation will be performed. Macro expansion can be done in a controlled
  876. # way by setting EXPAND_ONLY_PREDEF to YES.
  877. MACRO_EXPANSION = NO
  878. # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
  879. # then the macro expansion is limited to the macros specified with the
  880. # PREDEFINED and EXPAND_AS_DEFINED tags.
  881. EXPAND_ONLY_PREDEF = NO
  882. # If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
  883. # in the INCLUDE_PATH (see below) will be search if a #include is found.
  884. SEARCH_INCLUDES = YES
  885. # The INCLUDE_PATH tag can be used to specify one or more directories that
  886. # contain include files that are not input files but should be processed by
  887. # the preprocessor.
  888. INCLUDE_PATH =
  889. # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
  890. # patterns (like *.h and *.hpp) to filter out the header-files in the
  891. # directories. If left blank, the patterns specified with FILE_PATTERNS will
  892. # be used.
  893. INCLUDE_FILE_PATTERNS = *.h
  894. # The PREDEFINED tag can be used to specify one or more macro names that
  895. # are defined before the preprocessor is started (similar to the -D option of
  896. # gcc). The argument of the tag is a list of macros of the form: name
  897. # or name=definition (no spaces). If the definition and the = are
  898. # omitted =1 is assumed. To prevent a macro definition from being
  899. # undefined via #undef or recursively expanded use the := operator
  900. # instead of the = operator.
  901. PREDEFINED = HAVE_CONFIG_H
  902. # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
  903. # this tag can be used to specify a list of macro names that should be expanded.
  904. # The macro definition that is found in the sources will be used.
  905. # Use the PREDEFINED tag if you want to use a different macro definition.
  906. EXPAND_AS_DEFINED =
  907. # If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
  908. # doxygen's preprocessor will remove all function-like macros that are alone
  909. # on a line, have an all uppercase name, and do not end with a semicolon. Such
  910. # function macros are typically used for boiler-plate code, and will confuse
  911. # the parser if not removed.
  912. SKIP_FUNCTION_MACROS = YES
  913. #---------------------------------------------------------------------------
  914. # Configuration::additions related to external references
  915. #---------------------------------------------------------------------------
  916. # The TAGFILES option can be used to specify one or more tagfiles.
  917. # Optionally an initial location of the external documentation
  918. # can be added for each tagfile. The format of a tag file without
  919. # this location is as follows:
  920. #
  921. # TAGFILES = file1 file2 ...
  922. # Adding location for the tag files is done as follows:
  923. #
  924. # TAGFILES = file1=loc1 "file2 = loc2" ...
  925. # where "loc1" and "loc2" can be relative or absolute paths or
  926. # URLs. If a location is present for each tag, the installdox tool
  927. # does not have to be run to correct the links.
  928. # Note that each tag file must have a unique name
  929. # (where the name does NOT include the path)
  930. # If a tag file is not located in the directory in which doxygen
  931. # is run, you must also specify the path to the tagfile here.
  932. TAGFILES =
  933. # When a file name is specified after GENERATE_TAGFILE, doxygen will create
  934. # a tag file that is based on the input files it reads.
  935. GENERATE_TAGFILE =
  936. # If the ALLEXTERNALS tag is set to YES all external classes will be listed
  937. # in the class index. If set to NO only the inherited external classes
  938. # will be listed.
  939. ALLEXTERNALS = NO
  940. # If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
  941. # in the modules index. If set to NO, only the current project's groups will
  942. # be listed.
  943. EXTERNAL_GROUPS = YES
  944. # The PERL_PATH should be the absolute path and name of the perl script
  945. # interpreter (i.e. the result of `which perl').
  946. PERL_PATH = /usr/bin/perl
  947. #---------------------------------------------------------------------------
  948. # Configuration options related to the dot tool
  949. #---------------------------------------------------------------------------
  950. # If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
  951. # generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
  952. # or super classes. Setting the tag to NO turns the diagrams off. Note that
  953. # this option is superseded by the HAVE_DOT option below. This is only a
  954. # fallback. It is recommended to install and use dot, since it yields more
  955. # powerful graphs.
  956. CLASS_DIAGRAMS = YES
  957. # You can define message sequence charts within doxygen comments using the \msc
  958. # command. Doxygen will then run the mscgen tool (see
  959. # http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
  960. # documentation. The MSCGEN_PATH tag allows you to specify the directory where
  961. # the mscgen tool resides. If left empty the tool is assumed to be found in the
  962. # default search path.
  963. MSCGEN_PATH =
  964. # If set to YES, the inheritance and collaboration graphs will hide
  965. # inheritance and usage relations if the target is undocumented
  966. # or is not a class.
  967. HIDE_UNDOC_RELATIONS = YES
  968. # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
  969. # available from the path. This tool is part of Graphviz, a graph visualization
  970. # toolkit from AT&T and Lucent Bell Labs. The other options in this section
  971. # have no effect if this option is set to NO (the default)
  972. HAVE_DOT = YES
  973. # By default doxygen will write a font called FreeSans.ttf to the output
  974. # directory and reference it in all dot files that doxygen generates. This
  975. # font does not include all possible unicode characters however, so when you need
  976. # these (or just want a differently looking font) you can specify the font name
  977. # using DOT_FONTNAME. You need need to make sure dot is able to find the font,
  978. # which can be done by putting it in a standard location or by setting the
  979. # DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
  980. # containing the font.
  981. DOT_FONTNAME = FreeSans
  982. # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
  983. # The default size is 10pt.
  984. DOT_FONTSIZE = 10
  985. # By default doxygen will tell dot to use the output directory to look for the
  986. # FreeSans.ttf font (which doxygen will put there itself). If you specify a
  987. # different font using DOT_FONTNAME you can set the path where dot
  988. # can find it using this tag.
  989. DOT_FONTPATH =
  990. # If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
  991. # will generate a graph for each documented class showing the direct and
  992. # indirect inheritance relations. Setting this tag to YES will force the
  993. # the CLASS_DIAGRAMS tag to NO.
  994. CLASS_GRAPH = YES
  995. # If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
  996. # will generate a graph for each documented class showing the direct and
  997. # indirect implementation dependencies (inheritance, containment, and
  998. # class references variables) of the class with other documented classes.
  999. COLLABORATION_GRAPH = YES
  1000. # If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
  1001. # will generate a graph for groups, showing the direct groups dependencies
  1002. GROUP_GRAPHS = YES
  1003. # If the UML_LOOK tag is set to YES doxygen will generate inheritance and
  1004. # collaboration diagrams in a style similar to the OMG's Unified Modeling
  1005. # Language.
  1006. UML_LOOK = NO
  1007. # If set to YES, the inheritance and collaboration graphs will show the
  1008. # relations between templates and their instances.
  1009. TEMPLATE_RELATIONS = YES
  1010. # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
  1011. # tags are set to YES then doxygen will generate a graph for each documented
  1012. # file showing the direct and indirect include dependencies of the file with
  1013. # other documented files.
  1014. INCLUDE_GRAPH = YES
  1015. # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
  1016. # HAVE_DOT tags are set to YES then doxygen will generate a graph for each
  1017. # documented header file showing the documented files that directly or
  1018. # indirectly include this file.
  1019. INCLUDED_BY_GRAPH = YES
  1020. # If the CALL_GRAPH and HAVE_DOT options are set to YES then
  1021. # doxygen will generate a call dependency graph for every global function
  1022. # or class method. Note that enabling this option will significantly increase
  1023. # the time of a run. So in most cases it will be better to enable call graphs
  1024. # for selected functions only using the \callgraph command.
  1025. CALL_GRAPH = NO
  1026. # If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
  1027. # doxygen will generate a caller dependency graph for every global function
  1028. # or class method. Note that enabling this option will significantly increase
  1029. # the time of a run. So in most cases it will be better to enable caller
  1030. # graphs for selected functions only using the \callergraph command.
  1031. CALLER_GRAPH = NO
  1032. # If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
  1033. # will graphical hierarchy of all classes instead of a textual one.
  1034. GRAPHICAL_HIERARCHY = YES
  1035. # If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
  1036. # then doxygen will show the dependencies a directory has on other directories
  1037. # in a graphical way. The dependency relations are determined by the #include
  1038. # relations between the files in the directories.
  1039. DIRECTORY_GRAPH = YES
  1040. # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
  1041. # generated by dot. Possible values are png, jpg, or gif
  1042. # If left blank png will be used.
  1043. DOT_IMAGE_FORMAT = png
  1044. # The tag DOT_PATH can be used to specify the path where the dot tool can be
  1045. # found. If left blank, it is assumed the dot tool can be found in the path.
  1046. DOT_PATH =
  1047. # The DOTFILE_DIRS tag can be used to specify one or more directories that
  1048. # contain dot files that are included in the documentation (see the
  1049. # \dotfile command).
  1050. DOTFILE_DIRS =
  1051. # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
  1052. # nodes that will be shown in the graph. If the number of nodes in a graph
  1053. # becomes larger than this value, doxygen will truncate the graph, which is
  1054. # visualized by representing a node as a red box. Note that doxygen if the
  1055. # number of direct children of the root node in a graph is already larger than
  1056. # DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
  1057. # that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
  1058. DOT_GRAPH_MAX_NODES = 50
  1059. # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
  1060. # graphs generated by dot. A depth value of 3 means that only nodes reachable
  1061. # from the root by following a path via at most 3 edges will be shown. Nodes
  1062. # that lay further from the root node will be omitted. Note that setting this
  1063. # option to 1 or 2 may greatly reduce the computation time needed for large
  1064. # code bases. Also note that the size of a graph can be further restricted by
  1065. # DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
  1066. MAX_DOT_GRAPH_DEPTH = 0
  1067. # Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
  1068. # background. This is disabled by default, because dot on Windows does not
  1069. # seem to support this out of the box. Warning: Depending on the platform used,
  1070. # enabling this option may lead to badly anti-aliased labels on the edges of
  1071. # a graph (i.e. they become hard to read).
  1072. DOT_TRANSPARENT = NO
  1073. # Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
  1074. # files in one run (i.e. multiple -o and -T options on the command line). This
  1075. # makes dot run faster, but since only newer versions of dot (>1.8.10)
  1076. # support this, this feature is disabled by default.
  1077. DOT_MULTI_TARGETS = NO
  1078. # If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
  1079. # generate a legend page explaining the meaning of the various boxes and
  1080. # arrows in the dot generated graphs.
  1081. GENERATE_LEGEND = YES
  1082. # If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
  1083. # remove the intermediate dot files that are used to generate
  1084. # the various graphs.
  1085. DOT_CLEANUP = YES
  1086. #---------------------------------------------------------------------------
  1087. # Options related to the search engine
  1088. #---------------------------------------------------------------------------
  1089. # The SEARCHENGINE tag specifies whether or not a search engine should be
  1090. # used. If set to NO the values of all tags below this one will be ignored.
  1091. SEARCHENGINE = NO