|
- #daemon configuration
- telnet_port 4444
- gdb_port 3333
-
- # tell gdb our flash memory map
- # and enable flash programming
- gdb_memory_map enable
- gdb_flash_program enable
-
- #interface
- interface ft2232
- ft2232_device_desc "Amontec JTAGkey A"
- ft2232_layout jtagkey
- ft2232_vid_pid 0x0403 0xcff8
- jtag_speed 3
-
- #use combined on interfaces or targets that can't set TRST/SRST separately
- reset_config trst_and_srst srst_pulls_trst
-
- #jtag scan chain
- #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
- jtag_device 4 0x1 0xf 0xe
-
- #target configuration
- daemon_startup reset
-
- #target <type> <startup mode>
- #target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
- target arm7tdmi little 0 arm7tdmi-s_r4
-
- working_area 0 0x40000000 0x4000 nobackup
-
- #flash bank lpc2000 <base> <size> 0 0 <target#> <variant>
- flash bank lpc2000 0x0 0x7d000 0 0 0 lpc2000_v2 14765 calc_checksum
-
- # For more information about the configuration files, take a look at:
- # http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger
|