Uwe Hermann <uwe@hermann-uwe.de> spelling fixes

git-svn-id: svn://svn.berlios.de/openocd/trunk@1428 b42882b7-edfa-0310-969c-e2dbd0fdcd60

src/target/target/pxi42x.cfg → src/target/target/ixp42x.cfg

@@ -1,32 +1,32 @@
-#xscale ixp42x CPU
-
-
-if { [info exists CHIPNAME] } {	
-   set  _CHIPNAME $CHIPNAME    
-} else {	 
-   set  _CHIPNAME ipx42x
-}
-
-if { [info exists ENDIAN] } {	
-   set  _ENDIAN $ENDIAN    
-} else {	 
-  # this defaults to a bigendian
-   set  _ENDIAN big
-}
-
-if { [info exists CPUTAPID ] } {
-   set _CPUTAPID $CPUTAPID
-} else {
-  # force an error till we get a good number
-   set _CPUTAPID 0xffffffff
-}
-
-#use combined on interfaces or targets that can?t set TRST/SRST separately
-reset_config srst_only srst_pulls_trst
-#jtag scan chain
-
-jtag newtap $_CHIPNAME cpu -irlen 7 -ircapture 0x1 -irmask 0x7f -expected-id $_CPUTAPID
-
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
-target create $_TARGETNAME xscale -endian $_ENDIAN -chain-position $_TARGETNAME -variant ipxP42x
-
+#xscale ixp42x CPU
+
+
+if { [info exists CHIPNAME] } {	
+   set  _CHIPNAME $CHIPNAME    
+} else {	 
+   set  _CHIPNAME ixp42x
+}
+
+if { [info exists ENDIAN] } {	
+   set  _ENDIAN $ENDIAN    
+} else {	 
+  # this defaults to a bigendian
+   set  _ENDIAN big
+}
+
+if { [info exists CPUTAPID ] } {
+   set _CPUTAPID $CPUTAPID
+} else {
+  # force an error till we get a good number
+   set _CPUTAPID 0xffffffff
+}
+
+#use combined on interfaces or targets that can?t set TRST/SRST separately
+reset_config srst_only srst_pulls_trst
+#jtag scan chain
+
+jtag newtap $_CHIPNAME cpu -irlen 7 -ircapture 0x1 -irmask 0x7f -expected-id $_CPUTAPID
+
+set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+target create $_TARGETNAME xscale -endian $_ENDIAN -chain-position $_TARGETNAME -variant ixp42x
+

src/target/target/nslu2.cfg

@@ -1,7 +1,7 @@
-# This is for the LinkSys (CYSCO) LSLU2 board
-# It is an Intel XSCALE IPX420 CPU.
+# This is for the LinkSys (CISCO) NSLU2 board
+# It is an Intel XSCALE IXP420 CPU.
 
-source [find target/ipx42x.cfg]
+source [find target/ixp42x.cfg]
 # The _TARGETNAME is set by the above.
 
 $_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x00020000 -work-area-size 0x10000 -work-area-backup 0