|
|
@@ -1517,8 +1517,6 @@ Creates the tap ``foobar.tap'' with the instruction register (IR) is 7 |
|
|
|
bits long, during Capture-IR 0x42 is loaded into the IR, and bits |
|
|
|
[6,4,2,0] are checked. |
|
|
|
|
|
|
|
FIXME: The IDCODE - this was not used in the old code, it should be? |
|
|
|
Right? -Duane. |
|
|
|
@item @b{Optional configparams} |
|
|
|
@comment START Optional |
|
|
|
@itemize @bullet |
|
|
@@ -1613,13 +1611,13 @@ have the taps created in the proper order. |
|
|
|
@* @b{Removed: 28/nov/2008} This command has been removed and replaced |
|
|
|
by the ``jtag newtap'' command. The documentation remains here so that |
|
|
|
one can easily convert the old syntax to the new syntax. About the old |
|
|
|
syntax: The old syntax is positional, ie: The 4th parameter is the |
|
|
|
syntax: The old syntax is positional, ie: The 3rd parameter is the |
|
|
|
``irmask''. The new syntax requires named prefixes, and supports |
|
|
|
additional options, for example ``-irmask 4''. Please refer to the |
|
|
|
additional options, for example ``-expected-id 0x3f0f0f0f''. Please refer to the |
|
|
|
@b{jtag newtap} command for details. |
|
|
|
@example |
|
|
|
OLD: jtag_device 8 0x01 0x0e3 0xfe |
|
|
|
NEW: jtag newtap CHIPNAME TAPNAME -irlen 8 -ircapture 0xe3 -irmask 0xfe |
|
|
|
OLD: jtag_device 8 0x01 0xe3 0xfe |
|
|
|
NEW: jtag newtap CHIPNAME TAPNAME -irlen 8 -ircapture 0x01 -irmask 0xe3 |
|
|
|
@end example |
|
|
|
|
|
|
|
@section Enable/Disable Taps |
|
|
@@ -2990,10 +2988,11 @@ This would cause GDB to connect to the gdbserver on the local pc using port 3333 |
|
|
|
@item |
|
|
|
A pipe connection is typically started as follows: |
|
|
|
@example |
|
|
|
target remote openocd --pipe |
|
|
|
target remote | openocd --pipe |
|
|
|
@end example |
|
|
|
This would cause GDB to run OpenOCD and communicate using pipes (stdin/stdout). |
|
|
|
Using this method has the advantage of GDB starting/stopping OpenOCD for debug session. |
|
|
|
Using this method has the advantage of GDB starting/stopping OpenOCD for the debug |
|
|
|
session. |
|
|
|
@end enumerate |
|
|
|
|
|
|
|
@*To see a list of available OpenOCD commands type @option{monitor help} on the |
|
|
|