Browse Source

coding style: tcl: remove empty lines at end of text files

Empty lines at end of text files are useless.
Remove them.

Change-Id: I503cb0a96c7ccb132f4486c206a48831121d7abd
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5171
Tested-by: jenkins
jim
Antonio Borneo 4 years ago
parent
commit
9e23c9ae35
94 changed files with 0 additions and 116 deletions
  1. +0
    -2
      tcl/bitsbytes.tcl
  2. +0
    -1
      tcl/board/adsp-sc584-ezbrd.cfg
  3. +0
    -1
      tcl/board/altera_sockit.cfg
  4. +0
    -1
      tcl/board/am3517evm.cfg
  5. +0
    -1
      tcl/board/arm_evaluator7t.cfg
  6. +0
    -1
      tcl/board/at91cap7a-stk-sdram.cfg
  7. +0
    -1
      tcl/board/at91sam9g20-ek.cfg
  8. +0
    -2
      tcl/board/atmel_at91sam7s-ek.cfg
  9. +0
    -1
      tcl/board/atmel_sam3u_ek.cfg
  10. +0
    -1
      tcl/board/bcm28155_ap.cfg
  11. +0
    -4
      tcl/board/colibri.cfg
  12. +0
    -2
      tcl/board/dm365evm.cfg
  13. +0
    -1
      tcl/board/eir.cfg
  14. +0
    -1
      tcl/board/embedded-artists_lpc2478-32.cfg
  15. +0
    -1
      tcl/board/glyn_tonga2.cfg
  16. +0
    -1
      tcl/board/hitex_lpc1768stick.cfg
  17. +0
    -1
      tcl/board/hitex_lpc2929.cfg
  18. +0
    -1
      tcl/board/hitex_stm32-performancestick.cfg
  19. +0
    -1
      tcl/board/iar_lpc1768.cfg
  20. +0
    -2
      tcl/board/icnova_sam9g45_sodimm.cfg
  21. +0
    -1
      tcl/board/keil_mcb1700.cfg
  22. +0
    -1
      tcl/board/keil_mcb2140.cfg
  23. +0
    -1
      tcl/board/linksys_nslu2.cfg
  24. +0
    -1
      tcl/board/microchip_same54_xplained_pro.cfg
  25. +0
    -1
      tcl/board/novena-internal-fpga.cfg
  26. +0
    -1
      tcl/board/olimex_LPC2378STK.cfg
  27. +0
    -1
      tcl/board/olimex_lpc_h2148.cfg
  28. +0
    -1
      tcl/board/olimex_sam7_ex256.cfg
  29. +0
    -1
      tcl/board/openrd.cfg
  30. +0
    -1
      tcl/board/sheevaplug.cfg
  31. +0
    -1
      tcl/board/ti_beagleboard_xm.cfg
  32. +0
    -2
      tcl/board/ti_beaglebone.cfg
  33. +0
    -1
      tcl/board/ti_blaze.cfg
  34. +0
    -1
      tcl/board/ti_pandaboard.cfg
  35. +0
    -1
      tcl/board/ti_pandaboard_es.cfg
  36. +0
    -1
      tcl/board/topasa900.cfg
  37. +0
    -2
      tcl/board/unknown_at91sam9260.cfg
  38. +0
    -2
      tcl/board/uptech_2410.cfg
  39. +0
    -1
      tcl/board/voltcraft_dso-3062c.cfg
  40. +0
    -1
      tcl/chip/atmel/at91/aic.tcl
  41. +0
    -2
      tcl/chip/atmel/at91/at91sam9263_matrix.cfg
  42. +0
    -1
      tcl/chip/atmel/at91/pmc.tcl
  43. +0
    -1
      tcl/chip/atmel/at91/rtt.tcl
  44. +0
    -3
      tcl/chip/atmel/at91/usarts.tcl
  45. +0
    -1
      tcl/cpu/arm/arm7tdmi.tcl
  46. +0
    -1
      tcl/cpu/arm/arm920.tcl
  47. +0
    -1
      tcl/cpu/arm/arm946.tcl
  48. +0
    -1
      tcl/cpu/arm/arm966.tcl
  49. +0
    -1
      tcl/cpu/arm/cortex_m3.tcl
  50. +0
    -1
      tcl/interface/arm-jtag-ew.cfg
  51. +0
    -1
      tcl/interface/at91rm9200.cfg
  52. +0
    -1
      tcl/interface/buspirate.cfg
  53. +0
    -1
      tcl/interface/calao-usb-a9260.cfg
  54. +0
    -1
      tcl/interface/chameleon.cfg
  55. +0
    -1
      tcl/interface/dummy.cfg
  56. +0
    -1
      tcl/interface/ftdi/hitex_lpc1768stick.cfg
  57. +0
    -1
      tcl/interface/parport_dlc5.cfg
  58. +0
    -1
      tcl/interface/rlink.cfg
  59. +0
    -1
      tcl/interface/stlink.cfg
  60. +0
    -1
      tcl/interface/vsllink.cfg
  61. +0
    -1
      tcl/target/adsp-sc58x.cfg
  62. +0
    -1
      tcl/target/amdm37x.cfg
  63. +0
    -1
      tcl/target/ar71xx.cfg
  64. +0
    -1
      tcl/target/armada370.cfg
  65. +0
    -2
      tcl/target/at91sam3ax_8x.cfg
  66. +0
    -1
      tcl/target/at91sam3ax_xx.cfg
  67. +0
    -2
      tcl/target/at91sam3u1c.cfg
  68. +0
    -2
      tcl/target/at91sam3u1e.cfg
  69. +0
    -2
      tcl/target/at91sam3u2c.cfg
  70. +0
    -2
      tcl/target/at91sam3u2e.cfg
  71. +0
    -2
      tcl/target/at91sam3u4c.cfg
  72. +0
    -2
      tcl/target/at91sam3u4e.cfg
  73. +0
    -1
      tcl/target/at91sam3uxx.cfg
  74. +0
    -1
      tcl/target/at91sam7se512.cfg
  75. +0
    -1
      tcl/target/atsamv.cfg
  76. +0
    -1
      tcl/target/avr32.cfg
  77. +0
    -1
      tcl/target/cs351x.cfg
  78. +0
    -1
      tcl/target/dragonite.cfg
  79. +0
    -1
      tcl/target/dsp568013.cfg
  80. +0
    -1
      tcl/target/dsp568037.cfg
  81. +0
    -1
      tcl/target/feroceon.cfg
  82. +0
    -1
      tcl/target/hilscher_netx10.cfg
  83. +0
    -1
      tcl/target/icepick.cfg
  84. +0
    -1
      tcl/target/ixp42x.cfg
  85. +0
    -1
      tcl/target/kx.cfg
  86. +0
    -1
      tcl/target/readme.txt
  87. +0
    -1
      tcl/target/samsung_s3c2440.cfg
  88. +0
    -1
      tcl/target/samsung_s3c4510.cfg
  89. +0
    -2
      tcl/target/sharp_lh79532.cfg
  90. +0
    -1
      tcl/target/snps_em_sk_fpga.cfg
  91. +0
    -1
      tcl/target/stm32f7x.cfg
  92. +0
    -1
      tcl/target/str730.cfg
  93. +0
    -2
      tcl/target/u8500.cfg
  94. +0
    -1
      tcl/test/syntax1.cfg

+ 0
- 2
tcl/bitsbytes.tcl View File

@@ -57,5 +57,3 @@ proc show_normalize_bitfield { VALUE MSB LSB } {
echo [format "((0x%08x & 0x%08x) -> 0x%08x) >> %2d => (0x%x) %5d " $VALUE $m $mr $LSB $sr $sr]
return $sr
}



+ 0
- 1
tcl/board/adsp-sc584-ezbrd.cfg View File

@@ -28,4 +28,3 @@ transport select swd
adapter speed 400

source [find target/adsp-sc58x.cfg]


+ 0
- 1
tcl/board/altera_sockit.cfg View File

@@ -16,4 +16,3 @@ source [find target/altera_fpgasoc.cfg]
#usb_blaster_device_desc "USB-Blaster II"

adapter speed 100


+ 0
- 1
tcl/board/am3517evm.cfg View File

@@ -18,4 +18,3 @@ source [find target/amdm37x.cfg]
reset_config trst_only

# "amdm37x_dbginit am35x.cpu" needs to be run after init.


+ 0
- 1
tcl/board/arm_evaluator7t.cfg View File

@@ -7,4 +7,3 @@ source [find target/samsung_s3c4510.cfg]
# Add (A) sdram configuration
# Add (B) flash cfi programing configuration
#


+ 0
- 1
tcl/board/at91cap7a-stk-sdram.cfg View File

@@ -162,4 +162,3 @@ arm7_9 fast_memory_access enable

#set _FLASHNAME $_CHIPNAME.flash
#flash bank $_FLASHNAME at91sam7 0 0 0 0 $_TARGETNAME 0 0 0 0 0 0 0 18432


+ 0
- 1
tcl/board/at91sam9g20-ek.cfg View File

@@ -216,4 +216,3 @@ proc at91sam9g20_reset_init { } {

mww 0xffffea04 0x0000039c
}


+ 0
- 2
tcl/board/atmel_at91sam7s-ek.cfg View File

@@ -4,5 +4,3 @@
set CHIPNAME at91sam7s256

source [find target/at91sam7sx.cfg]



+ 0
- 1
tcl/board/atmel_sam3u_ek.cfg View File

@@ -1,4 +1,3 @@
source [find target/at91sam3u4e.cfg]

reset_config srst_only


+ 0
- 1
tcl/board/bcm28155_ap.cfg View File

@@ -6,4 +6,3 @@ set CHIPNAME bcm28155
source [find target/bcm281xx.cfg]

reset_config trst_and_srst


+ 0
- 4
tcl/board/colibri.cfg View File

@@ -7,7 +7,3 @@ adapter srst pulse_width 40
# the bank is 32-bits wide, two 16-bit chips in parallel
set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME cfi 0x00000000 0x02000000 2 4 $_TARGETNAME





+ 0
- 2
tcl/board/dm365evm.cfg View File

@@ -143,5 +143,3 @@ proc dm365evm_init {} {

flashprobe
}



+ 0
- 1
tcl/board/eir.cfg View File

@@ -91,4 +91,3 @@ $_TARGETNAME configure -event reset-init {
#
mww 0xfffffd08 0xa5000001
}


+ 0
- 1
tcl/board/embedded-artists_lpc2478-32.cfg View File

@@ -151,4 +151,3 @@ proc enable_pll {} {
mww 0xE01FC08C 0x000000AA ;# PLLFEED
mww 0xE01FC08C 0x00000055 ;# PLLFEED
}


+ 0
- 1
tcl/board/glyn_tonga2.cfg View File

@@ -197,4 +197,3 @@ proc tonga2_init { } {
#######################

# TODO: Implement NAND support.


+ 0
- 1
tcl/board/hitex_lpc1768stick.cfg View File

@@ -12,4 +12,3 @@ source [find target/lpc17xx.cfg]

# startup @ 500kHz
adapter speed 500


+ 0
- 1
tcl/board/hitex_lpc2929.cfg View File

@@ -103,4 +103,3 @@ $_TARGETNAME configure -event reset-init {
mww 0x600000CC 0x0000000C ;# Bank7 WST2=8
mww 0x600000C4 0x00000002 ;# Bank7 IDCY=2
}


+ 0
- 1
tcl/board/hitex_stm32-performancestick.cfg View File

@@ -13,4 +13,3 @@ jtag newtap str750 cpu -irlen 4 -ircapture 0x1 -irmask 0x0f -expected-id 0x4f1f0

# for some reason this board like to startup @ 500kHz
adapter speed 500


+ 0
- 1
tcl/board/iar_lpc1768.cfg View File

@@ -14,4 +14,3 @@ $_TARGETNAME configure -event reset-init {

flash probe 0
}


+ 0
- 2
tcl/board/icnova_sam9g45_sodimm.cfg View File

@@ -274,5 +274,3 @@ proc at91sam9g45_init { } {

arm7_9 fast_memory_access enable
}



+ 0
- 1
tcl/board/keil_mcb1700.cfg View File

@@ -5,4 +5,3 @@
#

source [find target/lpc17xx.cfg]


+ 0
- 1
tcl/board/keil_mcb2140.cfg View File

@@ -5,4 +5,3 @@
#

source [find target/lpc2148.cfg]


+ 0
- 1
tcl/board/linksys_nslu2.cfg View File

@@ -5,4 +5,3 @@ source [find target/ixp42x.cfg]
# The _TARGETNAME is set by the above.

$_TARGETNAME configure -work-area-phys 0x00020000 -work-area-size 0x10000 -work-area-backup 0


+ 0
- 1
tcl/board/microchip_same54_xplained_pro.cfg View File

@@ -10,4 +10,3 @@ set CHIPNAME same54
source [find target/atsame5x.cfg]

reset_config srst_only


+ 0
- 1
tcl/board/novena-internal-fpga.cfg View File

@@ -22,4 +22,3 @@ transport select jtag
sysfsgpio_jtag_nums 136 139 137 138

source [find cpld/xilinx-xc6s.cfg]


+ 0
- 1
tcl/board/olimex_LPC2378STK.cfg View File

@@ -8,4 +8,3 @@
#

source [find target/lpc2378.cfg]


+ 0
- 1
tcl/board/olimex_lpc_h2148.cfg View File

@@ -5,4 +5,3 @@
#

source [find target/lpc2148.cfg]


+ 0
- 1
tcl/board/olimex_sam7_ex256.cfg View File

@@ -1,4 +1,3 @@
# Olimex SAM7-EX256 has a single Atmel at91sam7ex256 on it.

source [find target/sam7x256.cfg]


+ 0
- 1
tcl/board/openrd.cfg View File

@@ -122,4 +122,3 @@ proc openrd_load_uboot { } {
resume 0x00600000

}


+ 0
- 1
tcl/board/sheevaplug.cfg View File

@@ -133,4 +133,3 @@ proc sheevaplug_load_uboot { } {
resume 0x00600000

}


+ 0
- 1
tcl/board/ti_beagleboard_xm.cfg View File

@@ -9,4 +9,3 @@ source [find target/amdm37x.cfg]
reset_config trst_only

# "amdm37x_dbginit dm37x.cpu" needs to be run after init.


+ 0
- 2
tcl/board/ti_beaglebone.cfg View File

@@ -9,5 +9,3 @@ adapter speed 16000
reset_config trst_and_srst

source [find board/ti_beaglebone-base.cfg]



+ 0
- 1
tcl/board/ti_blaze.cfg View File

@@ -3,4 +3,3 @@ jtag_rclk 6000
source [find target/omap4430.cfg]

reset_config trst_and_srst


+ 0
- 1
tcl/board/ti_pandaboard.cfg View File

@@ -3,4 +3,3 @@ jtag_rclk 6000
source [find target/omap4430.cfg]

reset_config trst_only


+ 0
- 1
tcl/board/ti_pandaboard_es.cfg View File

@@ -3,4 +3,3 @@ jtag_rclk 6000
source [find target/omap4460.cfg]

reset_config trst_only


+ 0
- 1
tcl/board/topasa900.cfg View File

@@ -123,4 +123,3 @@ arm7_9 dcc_downloads enable ;# Enable faster DCC downloads
#flash bank <name> cfi <base> <size> <chip width> <bus width> <target>
set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME cfi 0x20000000 0x1000000 2 2 $_TARGETNAME


+ 0
- 2
tcl/board/unknown_at91sam9260.cfg View File

@@ -93,5 +93,3 @@ $_TARGETNAME configure -event reset-init {
#flash bank <name> cfi <base> <size> <chip width> <bus width> <target>
set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME cfi 0x10000000 0x01000000 2 2 $_TARGETNAME



+ 0
- 2
tcl/board/uptech_2410.cfg View File

@@ -61,5 +61,3 @@ proc uptech2410_init { } {

set _NANDNAME $_CHIPNAME.nand
nand device $_NANDNAME s3c2410 $_TARGETNAME



+ 0
- 1
tcl/board/voltcraft_dso-3062c.cfg View File

@@ -28,4 +28,3 @@ scan_chain
targets
nand probe 0
nand list


+ 0
- 1
tcl/chip/atmel/at91/aic.tcl View File

@@ -98,4 +98,3 @@ proc show_AIC { } {
}
}
}


+ 0
- 2
tcl/chip/atmel/at91/at91sam9263_matrix.cfg View File

@@ -108,5 +108,3 @@ set AT91_MATRIX_EBI1_DBPUC [expr (1 << 8)] ;# Data Bus Pull-up Configuration
set AT91_MATRIX_EBI1_VDDIOMSEL [expr (1 << 16)] ;# Memory voltage selection
set AT91_MATRIX_EBI1_VDDIOMSEL_1_8V [expr (0 << 16)]
set AT91_MATRIX_EBI1_VDDIOMSEL_3_3V [expr (1 << 16)]



+ 0
- 1
tcl/chip/atmel/at91/pmc.tcl View File

@@ -14,4 +14,3 @@ if [info exists AT91C_SLOWOSC_FREQ] {
set AT91C_SLOWOSC_FREQ 32768
}
global AT91C_SLOWOSC_FREQ


+ 0
- 1
tcl/chip/atmel/at91/rtt.tcl View File

@@ -53,4 +53,3 @@ proc show_RTTC { } {
show_mmr32_reg RTTC_RTVR
show_mmr32_reg RTTC_RTSR
}


+ 0
- 3
tcl/chip/atmel/at91/usarts.tcl View File

@@ -130,6 +130,3 @@ proc show_DBGU { } $str
unset str

proc show_DBGU_MR_helper { NAME ADDR VAL } { show_mmr_USx_MR_helper $NAME $ADDR $VAL }




+ 0
- 1
tcl/cpu/arm/arm7tdmi.tcl View File

@@ -3,4 +3,3 @@ set CPU_NAME arm7tdmi
set CPU_ARCH armv4t
set CPU_MAX_ADDRESS 0xFFFFFFFF
set CPU_NBITS 32


+ 0
- 1
tcl/cpu/arm/arm920.tcl View File

@@ -3,4 +3,3 @@ set CPU_NAME arm920
set CPU_ARCH armv4t
set CPU_MAX_ADDRESS 0xFFFFFFFF
set CPU_NBITS 32


+ 0
- 1
tcl/cpu/arm/arm946.tcl View File

@@ -3,4 +3,3 @@ set CPU_NAME arm946
set CPU_ARCH armv5te
set CPU_MAX_ADDRESS 0xFFFFFFFF
set CPU_NBITS 32


+ 0
- 1
tcl/cpu/arm/arm966.tcl View File

@@ -3,4 +3,3 @@ set CPU_NAME arm966
set CPU_ARCH armv5te
set CPU_MAX_ADDRESS 0xFFFFFFFF
set CPU_NBITS 32


+ 0
- 1
tcl/cpu/arm/cortex_m3.tcl View File

@@ -3,4 +3,3 @@ set CPU_NAME cortex_m3
set CPU_ARCH armv7
set CPU_MAX_ADDRESS 0xFFFFFFFF
set CPU_NBITS 32


+ 0
- 1
tcl/interface/arm-jtag-ew.cfg View File

@@ -5,4 +5,3 @@
#

adapter driver arm-jtag-ew


+ 0
- 1
tcl/interface/at91rm9200.cfg View File

@@ -6,4 +6,3 @@

adapter driver at91rm9200
at91rm9200_device rea_ecr


+ 0
- 1
tcl/interface/buspirate.cfg View File

@@ -23,4 +23,3 @@ buspirate_speed normal ;# or fast

# this depends on the cable, you are safe with this option
reset_config srst_only


+ 0
- 1
tcl/interface/calao-usb-a9260.cfg View File

@@ -8,4 +8,3 @@

adapter srst delay 200
jtag_ntrst_delay 200


+ 0
- 1
tcl/interface/chameleon.cfg View File

@@ -6,4 +6,3 @@

adapter driver parport
parport_cable chameleon


+ 0
- 1
tcl/interface/dummy.cfg View File

@@ -3,4 +3,3 @@
#

adapter driver dummy


+ 0
- 1
tcl/interface/ftdi/hitex_lpc1768stick.cfg View File

@@ -12,4 +12,3 @@ ftdi_vid_pid 0x0640 0x0026
ftdi_layout_init 0x0388 0x038b
ftdi_layout_signal nTRST -data 0x0100
ftdi_layout_signal nSRST -data 0x0080 -noe 0x200


+ 0
- 1
tcl/interface/parport_dlc5.cfg View File

@@ -13,4 +13,3 @@ if { [info exists PARPORTADDR] } {
adapter driver parport
parport_port $_PARPORTADDR
parport_cable dlc5


+ 0
- 1
tcl/interface/rlink.cfg View File

@@ -5,4 +5,3 @@
#

adapter driver rlink


+ 0
- 1
tcl/interface/stlink.cfg View File

@@ -14,4 +14,3 @@ hla_vid_pid 0x0483 0x3744 0x0483 0x3748 0x0483 0x374b 0x0483 0x374d 0x0483 0x374
# number reset issues.
# eg.
#hla_serial "\xaa\xbc\x6e\x06\x50\x75\xff\x55\x17\x42\x19\x3f"


+ 0
- 1
tcl/interface/vsllink.cfg View File

@@ -5,4 +5,3 @@
#

adapter driver vsllink


+ 0
- 1
tcl/target/adsp-sc58x.cfg View File

@@ -50,4 +50,3 @@ proc sc58x_enabledebug {} {
# it is not possible to halt the target unless these bits have been set
ap0.mem mww 0x31131000 0xFFFF
}


+ 0
- 1
tcl/target/amdm37x.cfg View File

@@ -209,4 +209,3 @@ proc amdm37x_dbginit {target} {
# at this address and this bit.
$target mww phys 0x5401d030 0x00002000
}


+ 0
- 1
tcl/target/ar71xx.cfg View File

@@ -54,4 +54,3 @@ $_TARGETNAME configure -work-area-phys 0xa0600000 -work-area-size 0x20000

# serial SPI capable flash
# flash bank <driver> <base> <size> <chip_width> <bus_width>


+ 0
- 1
tcl/target/armada370.cfg View File

@@ -31,4 +31,3 @@ $_TARGETNAME configure -event reset-assert-post "armada370_dbginit $_TARGETNAME"
# We need to init now, so we can run the apsel command.
init
dap apsel 1


+ 0
- 2
tcl/target/at91sam3ax_8x.cfg View File

@@ -7,5 +7,3 @@ flash bank $_FLASHNAME at91sam3 0x000080000 0 1 1 $_TARGETNAME
# This is a 512K chip - it has the 2nd bank
set _FLASHNAME $_CHIPNAME.flash1
flash bank $_FLASHNAME at91sam3 0x0000C0000 0 1 1 $_TARGETNAME



+ 0
- 1
tcl/target/at91sam3ax_xx.cfg View File

@@ -8,4 +8,3 @@
# at91sam3X8E
# at91sam3X8H
source [find target/at91sam3XXX.cfg]


+ 0
- 2
tcl/target/at91sam3u1c.cfg View File

@@ -4,5 +4,3 @@ source [find target/at91sam3uxx.cfg]
# size is automatically "calculated" by probing
set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME at91sam3 0x000080000 0 1 1 $_TARGETNAME



+ 0
- 2
tcl/target/at91sam3u1e.cfg View File

@@ -4,5 +4,3 @@ source [find target/at91sam3uxx.cfg]
# size is automatically "calculated" by probing
set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME at91sam3 0x000080000 0 1 1 $_TARGETNAME



+ 0
- 2
tcl/target/at91sam3u2c.cfg View File

@@ -4,5 +4,3 @@ source [find target/at91sam3uxx.cfg]
# size is automatically "calculated" by probing
set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME at91sam3 0x000080000 0 1 1 $_TARGETNAME



+ 0
- 2
tcl/target/at91sam3u2e.cfg View File

@@ -4,5 +4,3 @@ source [find target/at91sam3uxx.cfg]
# size is automatically "calculated" by probing
set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME at91sam3 0x000080000 0 1 1 $_TARGETNAME



+ 0
- 2
tcl/target/at91sam3u4c.cfg View File

@@ -7,5 +7,3 @@ flash bank $_FLASHNAME at91sam3 0x000080000 0 1 1 $_TARGETNAME
# This is a 256K chip, it has the 2nd bank
set _FLASHNAME $_CHIPNAME.flash1
flash bank $_FLASHNAME at91sam3 0x000100000 0 1 1 $_TARGETNAME



+ 0
- 2
tcl/target/at91sam3u4e.cfg View File

@@ -7,5 +7,3 @@ flash bank $_FLASHNAME at91sam3 0x000080000 0 1 1 $_TARGETNAME
# This is a 256K chip - it has the 2nd bank
set _FLASHNAME $_CHIPNAME.flash1
flash bank $_FLASHNAME at91sam3 0x000100000 0 1 1 $_TARGETNAME



+ 0
- 1
tcl/target/at91sam3uxx.cfg View File

@@ -8,4 +8,3 @@
# at91sam3u1c

source [find target/at91sam3XXX.cfg]


+ 0
- 1
tcl/target/at91sam7se512.cfg View File

@@ -36,4 +36,3 @@ $_TARGETNAME configure -work-area-phys 0x00200000 -work-area-size 0x4000 -work-a
#flash bank <driver> <base_addr> <size> <chip_width> <bus_width> <target_number> [<target_name> <banks> <sectors_per_bank> <pages_per_sector> <page_size> <num_nvmbits> <ext_freq_khz>]
set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME at91sam7 0 0 0 0 $_TARGETNAME 0 0 0 0 0 0 0 18432


+ 0
- 1
tcl/target/atsamv.cfg View File

@@ -57,4 +57,3 @@ if {![using_hla]} {

set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME atsamv 0x00400000 0 0 0 $_TARGETNAME


+ 0
- 1
tcl/target/avr32.cfg View File

@@ -14,4 +14,3 @@ jtag newtap $_CHIPNAME cpu -irlen 5 -ircapture 0x1 -irmask 0x1 -expected-id $_CP

set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
target create $_TARGETNAME avr32_ap7k -endian $_ENDIAN -chain-position $_TARGETNAME


+ 0
- 1
tcl/target/cs351x.cfg View File

@@ -28,4 +28,3 @@ target create $_TARGETNAME fa526 -endian $_ENDIAN -chain-position $_TARGETNAME

# This chip has a DCC ... use it
arm7_9 dcc_downloads enable


+ 0
- 1
tcl/target/dragonite.cfg View File

@@ -28,4 +28,3 @@ target create $_TARGETNAME dragonite -endian $_ENDIAN -chain-position $_TARGETNA
reset_config trst_and_srst
adapter srst delay 200
jtag_ntrst_delay 200


+ 0
- 1
tcl/target/dsp568013.cfg View File

@@ -73,4 +73,3 @@ $_TARGETNAME configure -work-area-virt 0
#setup flash
set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME dsp5680xx_flash 0 0 2 1 $_TARGETNAME


+ 0
- 1
tcl/target/dsp568037.cfg View File

@@ -69,4 +69,3 @@ $_TARGETNAME configure -work-area-virt 0
#setup flash
set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME dsp5680xx_flash 0 0 2 1 $_TARGETNAME


+ 0
- 1
tcl/target/feroceon.cfg View File

@@ -28,4 +28,3 @@ target create $_TARGETNAME feroceon -endian $_ENDIAN -chain-position $_TARGETNAM
reset_config trst_and_srst
adapter srst delay 200
jtag_ntrst_delay 200


+ 0
- 1
tcl/target/hilscher_netx10.cfg View File

@@ -28,4 +28,3 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CP
# that TAP is associated with a target
set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position $_TARGETNAME


+ 0
- 1
tcl/target/icepick.cfg View File

@@ -140,4 +140,3 @@ proc icepick_c_wreset {jrc} {
# send a router write, block is 0, register is 1, value is 0x2100
icepick_c_router $jrc 1 0x0 0x1 0x002101
}


+ 0
- 1
tcl/target/ixp42x.cfg View File

@@ -104,4 +104,3 @@ proc ixp42x_init_sdram { SDRAM_CFG REFRESH CASLAT } {
proc ixp42x_set_bigendian { } {
reg XSCALE_CTRL 0xF8
}


+ 0
- 1
tcl/target/kx.cfg View File

@@ -79,4 +79,3 @@ if {[using_hla]} {
$_TARGETNAME configure -event reset-init {
kinetis disable_wdog
}


+ 0
- 1
tcl/target/readme.txt View File

@@ -38,4 +38,3 @@ Note that a target/xxx.cfg file can invoke another target/yyy.cfg file,
so one can create target subtype configurations where e.g. only
amount of DRAM, oscillator speeds differ and having a single
config file for the default/common settings.


+ 0
- 1
tcl/target/samsung_s3c2440.cfg View File

@@ -32,4 +32,3 @@ $_TARGETNAME configure -work-area-phys 0x200000 -work-area-size 0x4000 -work-are

#reset configuration
reset_config trst_and_srst


+ 0
- 1
tcl/target/samsung_s3c4510.cfg View File

@@ -21,4 +21,3 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CP

set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME


+ 0
- 2
tcl/target/sharp_lh79532.cfg View File

@@ -22,5 +22,3 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CP

set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME



+ 0
- 1
tcl/target/snps_em_sk_fpga.cfg View File

@@ -31,4 +31,3 @@ $_TARGETNAME configure -event reset-assert "arc_em_reset $_TARGETNAME"
arc_em_init_regs

# vim:ft=tcl


+ 0
- 1
tcl/target/stm32f7x.cfg View File

@@ -170,4 +170,3 @@ $_TARGETNAME configure -event reset-start {
# Reduce speed since CPU speed will slow down to 16MHz with the reset
adapter speed 2000
}


+ 0
- 1
tcl/target/str730.cfg View File

@@ -51,4 +51,3 @@ $_TARGETNAME configure -work-area-phys 0xA0000000 -work-area-size 0x4000 -work-a
#flash bank <driver> <base> <size> <chip_width> <bus_width>
set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME str7x 0x80000000 0x00040000 0 0 $_TARGETNAME STR73x


+ 0
- 2
tcl/target/u8500.cfg View File

@@ -322,5 +322,3 @@ set mem inaccessible-by-default-off

jtag_ntrst_delay 100
reset_config trst_and_srst combined



+ 0
- 1
tcl/test/syntax1.cfg View File

@@ -27,4 +27,3 @@ mvb 0xE01FC040 0x01

set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME lpc2000 0x0 0x7d000 0 0 0 lpc2000_v2 14765


Loading…
Cancel
Save