Browse Source

- disabled FT2232 debug output (that code should be fairly stable)

- fixed bug in jtag.c where JTAG command type was wrong for PATHMOVE commands
- added lattice ISP cable (experimental)
- properly initialize parallel port (clear tristate bit)
- fixed jtag/Makefile.am that failed with some versions of autotools
- print error number if read() in gdbserver.c failed on Windows
- fixed handling of opcodes with bits 27-25 b011 (comment was correct, code had a bug)
- added support for AT91SAM7SE internal flash


git-svn-id: svn://svn.berlios.de/openocd/trunk@122 b42882b7-edfa-0310-969c-e2dbd0fdcd60
tags/v0.1.0
drath 17 years ago
parent
commit
a4f2e1eaac
7 changed files with 57 additions and 14 deletions
  1. +34
    -0
      src/flash/at91sam7.c
  2. +1
    -3
      src/jtag/Makefile.am
  3. +2
    -2
      src/jtag/ft2232.c
  4. +1
    -1
      src/jtag/jtag.c
  5. +17
    -6
      src/jtag/parport.c
  6. +1
    -1
      src/server/gdb_server.c
  7. +1
    -1
      src/target/arm_disassembler.c

+ 34
- 0
src/flash/at91sam7.c View File

@@ -405,6 +405,40 @@ int at91sam7_read_part_info(struct flash_bank_s *bank)
return ERROR_OK;
}
if (at91sam7_info->cidr_arch == 0x72 )
{
at91sam7_info->num_nvmbits = 2;
at91sam7_info->nvmbits = (status>>8)&0x03;
bank->base = 0x100000;
bank->bus_width = 4;
if (bank->size==0x80000) /* AT91SAM7SE512 */
{
at91sam7_info->target_name = "AT91SAM7SE512";
at91sam7_info->num_lockbits = 32;
at91sam7_info->pagesize = 256;
at91sam7_info->pages_in_lockregion = 64;
at91sam7_info->num_pages = 32*64;
}
if (bank->size==0x40000)
{
at91sam7_info->target_name = "AT91SAM7SE256";
at91sam7_info->num_lockbits = 16;
at91sam7_info->pagesize = 256;
at91sam7_info->pages_in_lockregion = 64;
at91sam7_info->num_pages = 16*64;
}
if (bank->size==0x08000)
{
at91sam7_info->target_name = "AT91SAM7SE32";
at91sam7_info->num_lockbits = 8;
at91sam7_info->pagesize = 128;
at91sam7_info->pages_in_lockregion = 32;
at91sam7_info->num_pages = 8*32;
}
return ERROR_OK;
}
if (at91sam7_info->cidr_arch == 0x75 )
{
at91sam7_info->num_nvmbits = 3;


+ 1
- 3
src/jtag/Makefile.am View File

@@ -28,14 +28,12 @@ endif
if FT2232_LIBFTDI
FT2232FILES = ft2232.c
else
FT2232FILES =
endif

if FT2232_FTD2XX
FT2232FILES = ft2232.c
else
FT2232FILES =
endif
endif

if AMTJTAGACCEL
AMTJTAGACCELFILES = amt_jtagaccel.c


+ 2
- 2
src/jtag/ft2232.c View File

@@ -52,13 +52,13 @@

/* enable this to debug io latency
*/
#if 1
#if 0
#define _DEBUG_USB_IO_
#endif

/* enable this to debug communication
*/
#if 1
#if 0
#define _DEBUG_USB_COMMS_
#endif



+ 1
- 1
src/jtag/jtag.c View File

@@ -714,7 +714,7 @@ int jtag_add_pathmove(int num_states, enum tap_state *path)
*last_cmd = cmd_queue_alloc(sizeof(jtag_command_t));
last_comand_pointer = &((*last_cmd)->next);
(*last_cmd)->next = NULL;
(*last_cmd)->type = JTAG_RUNTEST;
(*last_cmd)->type = JTAG_PATHMOVE;
(*last_cmd)->cmd.pathmove = cmd_queue_alloc(sizeof(pathmove_command_t));
(*last_cmd)->cmd.pathmove->num_states = num_states;


+ 17
- 6
src/jtag/parport.c View File

@@ -98,6 +98,7 @@ cable_t cables[] =
{ "chameleon", 0x80, 0x00, 0x04, 0x01, 0x02, 0x00, 0x00, 0x80, 0x00 },
{ "dlc5", 0x10, 0x00, 0x04, 0x02, 0x01, 0x00, 0x00, 0x00, 0x10 },
{ "triton", 0x80, 0x08, 0x04, 0x01, 0x02, 0x00, 0x00, 0x80, 0x00 },
{ "lattice", 0x40, 0x10, 0x04, 0x02, 0x01, 0x08, 0x00, 0x00, 0x18 },
{ NULL, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }
};

@@ -311,7 +312,7 @@ int parport_init(void)
dataport_value = cable->PORT_INIT;
#if PARPORT_USE_PPDEV == 1
if (device_handle>0)
if (device_handle > 0)
{
ERROR("device is already opened");
return ERROR_JTAG_INIT_FAILED;
@@ -322,13 +323,14 @@ int parport_init(void)

snprintf(buffer, 256, "/dev/ppi%d", parport_port);
device_handle = open(buffer, O_WRONLY);
#else
#else /* not __Free_BSD */
DEBUG("opening /dev/parport%d...", parport_port);

snprintf(buffer, 256, "/dev/parport%d", parport_port);
device_handle = open(buffer, O_WRONLY);
#endif
if (device_handle<0)
#endif /* __FreeBSD__ */

if (device_handle < 0)
{
ERROR("cannot open device. check it exists and that user read and write rights are set");
return ERROR_JTAG_INIT_FAILED;
@@ -359,8 +361,9 @@ int parport_init(void)
ERROR("cannot set compatible 1284 mode to device");
return ERROR_JTAG_INIT_FAILED;
}
#endif
#else
#endif /* not __Free_BSD__ */

#else /* not PARPORT_USE_PPDEV */
if (parport_port == 0)
{
parport_port = 0x378;
@@ -381,6 +384,14 @@ int parport_init(void)
return ERROR_JTAG_INIT_FAILED;
}
DEBUG("...privileges granted");
/* make sure parallel port is in right mode (clear tristate and interrupt */
#ifdef __FreeBSD__
outb(parport_port + 2, 0x0);
#else
outb(0x0, dataport);
#endif
#endif /* PARPORT_USE_PPDEV */
parport_reset(0, 0);


+ 1
- 1
src/server/gdb_server.c View File

@@ -98,7 +98,7 @@ int gdb_get_char(connection_t *connection, int* next_char)
case WSAECONNABORTED:
return ERROR_SERVER_REMOTE_CLOSED;
default:
ERROR("read: %d", strerror(errno));
ERROR("read: %d", errno);
exit(-1);
}
#else


+ 1
- 1
src/target/arm_disassembler.c View File

@@ -1247,7 +1247,7 @@ int evaluate_opcode(u32 opcode, u32 address, arm_instruction_t *instruction)
}
/* catch opcodes with [27:25] = b011 */
if ((opcode & 0x0e000000) == 0x04000000)
if ((opcode & 0x0e000000) == 0x06000000)
{
/* Undefined instruction */
if ((opcode & 0x00000010) == 0x00000010)


Loading…
Cancel
Save