@@ -114,7 +114,6 @@ void comstick_reset(int trst, int srst);
void stm32stick_reset(int trst, int srst);
void axm0432_jtag_reset(int trst, int srst);
/* blink procedures for layouts that support a blinking led */
void olimex_jtag_blink(void);
void turtle_jtag_blink(void);
@@ -1049,7 +1048,6 @@ void olimex_jtag_reset(int trst, int srst)
LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x", trst, srst, high_output, high_direction);
}
void axm0432_jtag_reset(int trst, int srst)
{
if (trst == 1)
@@ -1062,24 +1060,21 @@ void axm0432_jtag_reset(int trst, int srst)
high_output |= nTRST;
}
if (srst == 1)
{
high_output &= ~nSRST;
}
else if (srst == 0)
{
high_output |= nSRST;
}
/* command "set data bits low byte" */
BUFFER_ADD = 0x82;
BUFFER_ADD = high_output;
BUFFER_ADD = high_direction;
LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x", trst, srst, high_output, high_direction);
}
if (srst == 1)
{
high_output &= ~nSRST;
}
else if (srst == 0)
{
high_output |= nSRST;
}
/* command "set data bits low byte" */
BUFFER_ADD = 0x82;
BUFFER_ADD = high_output;
BUFFER_ADD = high_direction;
LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x", trst, srst, high_output, high_direction);
}
void flyswatter_reset(int trst, int srst)
{
@@ -1414,15 +1409,13 @@ static int ft2232_init_ftd2xx(u16 vid, u16 pid, int more, int *try_more)
char *openex_string = NULL;
u8 latency_timer;
LOG_DEBUG("'ft2232' interface using FTD2XX with '%s' layout (%4.4x:%4.4x)",
ft2232_layout, vid, pid);
LOG_DEBUG("'ft2232' interface using FTD2XX with '%s' layout (%4.4x:%4.4x)",ft2232_layout, vid, pid);
#if IS_WIN32 == 0
/* Add non-standard Vid/Pid to the linux driver */
if ((status = FT_SetVIDPID(vid, pid)) != FT_OK)
{
LOG_WARNING("couldn't add %4.4x:%4.4x",
vid, pid);
LOG_WARNING("couldn't add %4.4x:%4.4x", vid, pid);
}
#endif
@@ -1455,8 +1448,7 @@ static int ft2232_init_ftd2xx(u16 vid, u16 pid, int more, int *try_more)
DWORD num_devices;
if (more) {
LOG_WARNING("unable to open ftdi device (trying more): %lu",
status);
LOG_WARNING("unable to open ftdi device (trying more): %lu", status);
*try_more = 1;
return ERROR_JTAG_INIT_FAILED;
}
@@ -1758,13 +1750,10 @@ int usbjtag_init(void)
return ERROR_OK;
}
int axm0432_jtag_init(void)
{
u8 buf[3];
u8 buf_read[1];
u32 bytes_written;
u32 bytes_read;
low_output = 0x08;
low_direction = 0x2b;
@@ -1781,7 +1770,6 @@ int axm0432_jtag_init(void)
return ERROR_JTAG_INIT_FAILED;
}
if (strcmp(layout->name, "axm0432_jtag") == 0)
{
nTRST = 0x08;
@@ -1798,16 +1786,16 @@ int axm0432_jtag_init(void)
high_output = 0x0;
high_direction = 0x0c;
if (jtag_reset_config & RESET_TRST_OPEN_DRAIN)
if (jtag_reset_config & RESET_TRST_OPEN_DRAIN)
{
LOG_ERROR("can't set nTRSTOE to push-pull on the Dicarlo jtag");
}
LOG_ERROR("can't set nTRSTOE to push-pull on the Dicarlo jtag");
}
else
{
high_output |= nTRST;
}
if (jtag_reset_config & RESET_SRST_PUSH_PULL)
if (jtag_reset_config & RESET_SRST_PUSH_PULL)
{
LOG_ERROR("can't set nSRST to push-pull on the Dicarlo jtag");
}
@@ -1831,9 +1819,6 @@ int axm0432_jtag_init(void)
return ERROR_OK;
}
int jtagkey_init(void)
{
u8 buf[3];
@@ -2048,7 +2033,7 @@ int turtle_init(void)
}
nSRST = 0x40;
high_output = 0x00;
high_direction = 0x0C;
@@ -2091,7 +2076,7 @@ int comstick_init(void)
nTRSTnOE = 0x00; /* no output enable for nTRST */
nSRST = 0x02;
nSRSTnOE = 0x00; /* no output enable for nSRST */
high_output = 0x03;
high_direction = 0x03;
@@ -2134,7 +2119,7 @@ int stm32stick_init(void)
nTRSTnOE = 0x00; /* no output enable for nTRST */
nSRST = 0x80;
nSRSTnOE = 0x00; /* no output enable for nSRST */
high_output = 0x01;
high_direction = 0x03;