|
|
@@ -2,27 +2,149 @@ This file includes highlights of the changes made in the OpenOCD |
|
|
|
source archive release. |
|
|
|
|
|
|
|
JTAG Layer: |
|
|
|
* New driver for J-Link adapters based on libjaylink |
|
|
|
(including support for FPGA configuration and EMUCOM) |
|
|
|
* FTDI improvements to work at 30MHz clock |
|
|
|
* BCM2835 native driver SWD and Raspberry Pi2 support |
|
|
|
* BCM2835 is set to 4ma drive, slow slew rate |
|
|
|
* ixo-usb-jtag (emulation of an Altera Bus Blaster I on |
|
|
|
Cypress FX2 IC) support |
|
|
|
* JTAG pass-through mode for CMSIS-DAP (including support for |
|
|
|
FPGA configuration) |
|
|
|
* OpenJTAG support for Cypress CY7C65215 |
|
|
|
* connect_assert_srst support for SWD |
|
|
|
* Xilinx Virtex-II Series7 bitstream loading support |
|
|
|
* Use JEP106 data to decode IDs |
|
|
|
* Deprecated "ft2232" driver removed (use "ftdi" instead) |
|
|
|
* GPL-incompatible FTDI D2XX library support dropped (Presto, |
|
|
|
OpenJTAG and USB-Blaster I are using libftdi only now) |
|
|
|
* ZY1000 support dropped (unmaintained since long) |
|
|
|
* oocd_trace support dropped |
|
|
|
|
|
|
|
Boundary Scan: |
|
|
|
|
|
|
|
Target Layer: |
|
|
|
* ARMv7-A, Cortex-M, Cortex-A/R important fixes and |
|
|
|
improvements (allowing e.g. simultaneous debugging of A8 and |
|
|
|
M3 cores, JTAG WAIT support etc.) |
|
|
|
* ARM Cortex-A,R allow interrupt disable during single-step |
|
|
|
(maskisr command) |
|
|
|
* Semihosting support for ARMv7-A |
|
|
|
* ARM Cortex-M7 support |
|
|
|
* Intel Quark mcu D2000 support |
|
|
|
* Freescale LS102x SAP support |
|
|
|
* ThreadX RTOS support on ARM926E-JS |
|
|
|
* Cortex-M RTOS stack alignment fixes |
|
|
|
* FreeRTOS FPU support |
|
|
|
* uC/OS-III RTOS support |
|
|
|
* bridging semihosting to GDB's File-I/O support |
|
|
|
* -defer-examine option added to target create command |
|
|
|
* verify_image_checksum command added |
|
|
|
|
|
|
|
Flash Layer: |
|
|
|
* Atmel SAM4S, SAM4N, SAM4C support |
|
|
|
* Atmel SAMV, SAMS, SAME (Cortex-M7) support |
|
|
|
* Atmel AT91SAMD handle reset run/halt in DSU, other fixes |
|
|
|
* Atmel AT91SAML21, SAML22, SAMC20/SAMC21, SAMD09 support |
|
|
|
* ST STM32F4x support |
|
|
|
* ST STM32F74x/76x/77x, STM32L4 support |
|
|
|
* ST STM32L0 categories 1, 2 and 5 support |
|
|
|
* Kinetis K02, K21, K22, K24, K26, K63, K64, K66 support |
|
|
|
* Kinetis KE, KVx, K8x families support |
|
|
|
* Kinetis FlexNVM handling |
|
|
|
* Kinetis flash protection, security, mass_erase improvements |
|
|
|
* Infineon XMC4xxx family support |
|
|
|
* Infineon XMC1000 flash driver |
|
|
|
* Energy Micro EFM32 Happy Gecko support |
|
|
|
* Energy Micro EFM32 debug interface lock support |
|
|
|
* Analog Devices ADuCM360 support |
|
|
|
* Unified Nuvoton NuMicro flash driver |
|
|
|
* NIIET K1921VK01T (Cortex-M4) support |
|
|
|
* Nordic Semiconductor nRF51 improvements |
|
|
|
* Spansion FM4 flash (including MB9BFx64/x65, S6E2DH) driver |
|
|
|
* Ambiq Micro Apollo flash driver |
|
|
|
* PIC32MX new device IDs, 17x/27x flash support |
|
|
|
* read_bank() and verify_bank() NOR flash internal API to |
|
|
|
allow reading (and verifying) non-memory-mapped devices |
|
|
|
* JTAGSPI driver to access SPI NOR flashes via a trivial |
|
|
|
FPGA proxy |
|
|
|
* Milandr read/verify for Info memory support |
|
|
|
* Various discrete SPI NOR flashes support |
|
|
|
* CFI 16-bit flash reversed endianness support |
|
|
|
|
|
|
|
Board, Target, and Interface Configuration Scripts: |
|
|
|
* Digilent JTAG-HS2, JTAG-HS3 interfaces configs |
|
|
|
* FTDI UM232H module as JTAG interface config |
|
|
|
* 100ask's OpenJTAG interface config |
|
|
|
* MBFTDI interface config |
|
|
|
* XDS100v3 interface config |
|
|
|
* Freescale Vybrid VF6xx target config |
|
|
|
* EmCraft VF6 SOM and baseboard configs |
|
|
|
* Freescale SabreSD board config |
|
|
|
* Freescale VF65GS10 tower board config |
|
|
|
* Pipistrello Xilinx Spartan6 LX45 FPGA board config |
|
|
|
* miniSpartan6+ board config |
|
|
|
* Xilinx Kintex7 Development board config |
|
|
|
* Parallella-I board config |
|
|
|
* Digilent Atlys and Analog Discovery board configs |
|
|
|
* Numato Opsis board config |
|
|
|
* Xilinx Spartan 6 FPGA "Device DNA" reading support |
|
|
|
* Altera 10M50 FPGA (MAX10 family) target config |
|
|
|
* Altera EPM240 CPLD (MAXII family) target config |
|
|
|
* Marsohod2, Marsohod3 FPGA, Marsohod CPLD boards configs |
|
|
|
* Novena's integrated FPGA board config |
|
|
|
* XMOS XS1-XAU8A-10's ARM core config |
|
|
|
* XMOS xCORE-XA Core Module board config |
|
|
|
* Exynos5250 target config |
|
|
|
* Arndale board config |
|
|
|
* FM4 MB9BFxxx family configs |
|
|
|
* Spansion SK-FM4-U120-9B560 board config |
|
|
|
* Diolan LPC4357-DB1 board config |
|
|
|
* ST STM32F469 discovery board config |
|
|
|
* ST STM32F7-DISCO, STM327[4|5]6G-EVAL boards configs |
|
|
|
* ST STM32L4 discovery, NUCLEO L476RG, STM32F429I-DISC1 boards |
|
|
|
configs |
|
|
|
* Atheros AR2313, AR2315 targets config |
|
|
|
* Netgear WP102 board config |
|
|
|
* La Fonera FON2200 board config |
|
|
|
* Linksys WAG200G board config |
|
|
|
* LPC-Link2 board config |
|
|
|
* NXP LPC4370 target config |
|
|
|
* Atmel SAMV, SAMS, SAME target configs |
|
|
|
* Atmel SAM E70 Xplained, SAM V71 Xplained Ultra boards |
|
|
|
configs |
|
|
|
* Nordic nRF52 target config |
|
|
|
* Nordic nRF51-DK, nRF52-DK boards configs |
|
|
|
* Infineon XMC4700 Relax Kit, XMC4800 Relax EtherCAT Kit, |
|
|
|
XMC4300 Relax EtherCAT Kit boards configs |
|
|
|
* Renesas S7G2 target config |
|
|
|
* Renesas DK-S7G2 board config |
|
|
|
* Altera EP3C10 FPGA (Cyclone III family) target config |
|
|
|
* TI MSP432P4xx target config |
|
|
|
* Cypress PSoC 5LP target config |
|
|
|
* Analog Devices ADSP-SC58x target config (Cortex-A5 core only) |
|
|
|
|
|
|
|
Server Layer: |
|
|
|
* tcl_trace command for async target trace output via Tcl RPC |
|
|
|
|
|
|
|
Documentation: |
|
|
|
|
|
|
|
Build and Release: |
|
|
|
* Various fixes thanks to http://coccinellery.org/ |
|
|
|
* libftdi is now autodetected with pkgconfig |
|
|
|
* Releases should now support reproducible builds |
|
|
|
* Conversion to non-recursive make, requires automake >= 1.14 |
|
|
|
* Udev rules modified to add uaccess tag and moved to |
|
|
|
60-openocd.rules |
|
|
|
* Support searching for scripts relative to the openocd binary |
|
|
|
for all major architectures |
|
|
|
|
|
|
|
|
|
|
|
This release also contains a number of other important functional and |
|
|
|
cosmetic bugfixes. For more details about what has changed since the |
|
|
|
last release, see the git repository history: |
|
|
|
|
|
|
|
http://sourceforge.net/p/openocd/code/ci/v0.x.0/log/?path= |
|
|
|
http://sourceforge.net/p/openocd/code/ci/v0.10.0-rc1/log/?path= |
|
|
|
|
|
|
|
|
|
|
|
For older NEWS, see the NEWS files associated with each release |
|
|
|