|
- This file includes highlights of the changes made in the
- OpenOCD 0.5.0 source archive release. See the repository
- history for details about what changed, including bugfixes
- and other issues not mentioned here.
-
- JTAG Layer:
- New driver for "Bus Pirate"
- Rename various commands so they're not JTAG-specific
- There are migration procedures for most of these, but you should
- convert your scripts to the new names, since those procedures
- will not be around forever.
- jtag jinterface ... is now adapter_name
- jtag_khz ... is now adapter_khz
- jtag_nsrst_delay ... is now adapter_nsrst_delay
- jtag_nsrst_assert_width ... is now adapter_nsrst_assert_width
- Support Voipac VPACLink JTAG Adapter.
-
- Boundary Scan:
-
- Transport framework core ... supporting future work for SWD, SPI, and other
- non-JTAG ways to debug targets or program flash.
-
- Target Layer:
- ARM:
- - basic semihosting support for ARMv7M.
- - renamed "armv7m" command prefix as "arm"
- MIPS:
- - "ejtag_srst" variant removed. The same functionality is
- obtained by using "reset_config none".
- - added PIC32MX software reset support, this means srst is not
- required to be connected anymore.
- OTHER:
- - preliminary AVR32 AP7000 support.
-
- Flash Layer:
- New "stellaris recover" command, implements the procedure
- to recover locked devices (restoring non-volatile
- state to the factory defaults, including erasing
- the flash and its protection bits, and possibly
- re-enabling hardware debugging).
- PIC32MX now uses algorithm for flash programming, this
- has increased the performance by approx 96%.
- New 'pic32mx unlock' cmd to remove readout protection.
- New STM32 Value Line Support.
- New 'virtual' flash driver, used to associate other addresses
- with a flash bank. See pic32mx.cfg for usage.
- New iMX27 NAND flash controller driver.
-
- Board, Target, and Interface Configuration Scripts:
- Support IAR LPC1768 kickstart board (by Olimex)
- Support Voipac PXA270/PXA270M module.
- New $PARPORTADDR tcl variable used to change default
- parallel port address used.
- Remove lm3s811.cfg; use "stellaris.cfg" instead
-
- Core Jim/TCL Scripting:
- New "add_script_search_dir" command, behaviour is the same
- as the "-s" cmd line option.
-
- Documentation:
-
- Build and Release:
-
- For more details about what has changed since the last release,
- see the git repository history. With gitweb, you can browse that
- in various levels of detail.
-
- For older NEWS, see the NEWS files associated with each release
- (i.e. NEWS-<version>).
-
- For more information about contributing test reports, bug fixes, or new
- features and device support, please read the new Developer Manual (or
- the BUGS and PATCHES.txt files in the source archive).
|