|
- #daemon configuration
- telnet_port 4444
- gdb_port 3333
-
- # tell gdb our flash memory map
- # and enable flash programming
- gdb_memory_map enable
- gdb_flash_program enable
-
- #interface
- interface ft2232
- ft2232_device_desc "Amontec JTAGkey A"
- ft2232_layout jtagkey
- ft2232_vid_pid 0x0403 0xcff8
- jtag_speed 1
-
- jtag_nsrst_delay 100
- jtag_ntrst_delay 100
-
- #use combined on interfaces or targets that can't set TRST/SRST separately
- reset_config trst_and_srst
-
- #jtag scan chain
- #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
- jtag_device 8 0x1 0x1 0xfe
- jtag_device 4 0x1 0xf 0xe
- jtag_device 5 0x1 0x1 0x1e
-
- #target configuration
- target create target0 arm966e -endian little -chain-position 1 -variant arm966e
- [new_target_name] configure -work-area-virt 0 -work-area-phys 0x50000000 -work-area-size 16384 -work-area-backup false
-
- target_script 0 gdb_program_config .\prj\str912_program.script
-
- #flash bank str7x <base> <size> 0 0 <target#> <variant>
- flash bank str9x 0x00000000 0x00080000 0 0 0
-
- # For more information about the configuration files, take a look at:
- # http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger
-
- init
- reset halt
|
