This driver provides support for the P&E Micro OSBDM adapter (sometimes
named as OSJTAG), mounted on the Freescale TWRK60N512 bord. Thus, it
provides a quick start when working with this board. The driver doesn't
use BDM commands, but work with OSBDM adapter using only JTAG commands.
Change-Id: Ibc3779538e666e07651d3136431e5d44344f3b07
Signed-off-by: Jan Dakinevich <jan.dakinevich@gmail.com>
Reviewed-on: http://openocd.zylin.com/492
Tested-by: jenkins
Reviewed-by: Tomas Frydrych <tf+openocd@r-finger.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
automake 1.11.2 throws `pkglibdir' is not a legitimate directory for `DATA'
if nobase_dist_pkglib_DATA is used.
We work around this issue by defining our own location.
Change-Id: I3c29e2df0b67e745283c50d358e31699bd60dc74
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/457
Tested-by: jenkins
ST-Link USB support added.
Change-Id: I2812646f2895b1529ff3f911edbdce7fa0051c8f
Signed-off-by: Mathias K <kesmtp@freenet.de>
Reviewed-on: http://openocd.zylin.com/261
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
The configuration script check for libusb-1.0 availability first and only
if not found check for libusb-0. So if both libraries are installed on the
system the build script will use libusb-1.0
It's possible to force compiling with libusb-0 with the --enable-libusb0 switch.
If the driver support only libusb0 the script check anly for it.
Change-Id: I7eb045d4e2bd553abefad53f3f4023ff46b0f5f6
Signed-off-by: Mauro Gamba <maurillo71@gmail.com>
Reviewed-on: http://openocd.zylin.com/33
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
The driver sends ascii encoded bitbang commands over unix sockets or TCP to
another process. This driver is useful for debugging software running on
processors which are being simulated.
A new variable "nobase_dist_pkglib_DATA" is introduced to install
the OpenULINK firmware image to $PREFIX/lib/openocd/OpenULINK/ulink_firmware.hex
Also, the variable "EXTRA_DIST" is used to include the OpenULINK firmware source
in the OpenOCD source distribution.
This includes a driver and matching config file. This support needs to be
enabled through the initial "configure" (use "--enable-buspirate").
Signed-off-by: Michal Demin <michaldemin@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
The 10-pin JTAG layout used with these adapters is used by
a variety of platforms including AVR.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Includes the src directory in the search path, so header files may be
migrated from:
#include "foo.h"
to
#include <module/foo.h>
which is more conducive for installation.
Moves JTAG interface drivers to src/jtag/drivers/,
Adds src/jtag/drivers/Makefile.am.
Builds libocdjtagdrivers.la.
Flattens the rlink driver files into the drivers/ directory, adding
the 'rlink_' prefix or '.rlink' suffix as appropriate.
Begins to consolidate code used by several USB JTAG interfaces.
This first patch provides the required build system changes and
a common jtag_usb_open routine, which will replace the guts for
probing the busses and devices for possible VID/PID matches.
The following patches convert each driver to use it.
Moves definitions for each layer into their own file, eliminating
layering violations in the built-in TCL code. Updates src/Makefile.am
rules to include all files in the final startup.tcl input file, and
others Makefile.am rules to distribute the new files in our packages.
- Adds new source files to encapsulate static/dynamic module handling.
- Further work should implement the jtag_interface_modules_load routine,
to populate the jtag_interfaces list from shared libraries in a path.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2413 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Remove once-used XXX_FTD2XX symbols; replace with XXX_DRIVER symbols.
- Enabled when either libftdi or FTD2xx driver should be built.
- Eliminates redundant DRIVERSFILE assignment in JTAG automake input.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2177 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Consolidate all individual driver variables into DRIVERFILES.
- Eliminates all empty 'else' conditional clauses.
- Move minidriver files to top of file.
- Use MINIDRIVER conditional to build only driver(s) that will be linked.
- Eliminate superfluous whitespace.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2176 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- src/jtag/core.c: contains the low-level JTAG TAP and scanning routines.
- src/jtag/tcl.c: contains high-level JTAG TCL commands that use the core.
- Remove static keywords from routines in core.c, extern from tcl.c:
- jtag, jtag_interface global variables
- jtag_{examine,validate}_chain and jtag_tap_{init,free} functions
- Added myself to the copyright header in both of these files.
- Used 'svn cp' to add files, so versioning was preserved for both.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2149 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Try to disambiguates minidriver options from "standard" driver options.
- Make minidummy symbols more explict about being a minidriver.
- Move minidummy.c into minidummy directory to put it with its header.
In configure.in:
- Improve configuration option to allow new minidriver implementations:
- Change option from --enable-minidummy to --enable-minidriver-dummy.
- Move it to the end of the list of options.
- Provides a clear pattern for future minidrivers.
- Update handling of HAVE_JTAG_MINIDRIVER_H:
- Check for external jtag_minidriver.h only with --enable-ecosboard.
- Otherwise, define it when --enable-minidriver-dummy is provided.
- Add check to ensure only one minidriver is enabled.
- When a minidriver is enabled, warn user that standard drivers are not built.
- Use proper AC_DEFINE semantics with MINIDRIVER_DUMMY.
In src/jtag/Makefile.am:
- Restructure handling of minidummy source files.
- Include minidummy driver header in the distribution.
In src/jtag/jtag.c:
- Restructure preprocessor logic to include:
- only one minidriver, or
- all configured standard drivers.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2102 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Cloned the src/jtag/jtag.c file to src/jtag/interface.c.
- For each for of those files, deleted the contents of the other.
- Add new source file to automake input.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2012 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Move the jtag_interface structure definition.
- Move the Cable API declarations.
- Add new header file to automake input.
The next patch will move the implementation to interface.c.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2008 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Wraps all minidriver API functions using API front-ends:
- Outlines jtag_add_dr_out() and jtag_alloc_in_value32().
- Adds interface_ prefix to existing jtag_alloc_invalue_32 routines.
- Re-inline these interface definitions in new header file.
- Re-inline parts of the (mini)driver implementations in minidriver.h.
- Replace INCLUDE_JTAG_MINIDRIVER_H with #include directives.
The next patch will finish removing '#ifdef HAVE_JTAG_MINIDRIVER_H'
from jtag.h.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2006 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- use continuations to break long lines of variable assignments
- makes these variables more patch-friendly and conform to style guide
git-svn-id: svn://svn.berlios.de/openocd/trunk@1970 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Add libtoolize step too bootstrap script; creates ltmain.sh script.
- Add AC_PROG_LIBTOOL to configure.in to add libtool support to build.
- Change Makefile.am library rules from static (_a) to libtool (_la).
- Install libopenocd.{la,so,a} in $(libdir); update openocd link rules.
- Extend MAINTAINERCLEANFILES in top-level Makefile.am to remove ltmain.sh.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1695 b42882b7-edfa-0310-969c-e2dbd0fdcd60
already required autoconf 2.59 (circa 2006), so there is no reason to
support versions of automake older than 1.6 (circa 2002).
The first part of this patch upgrades the configure.in script:
1. Use current calling conventions for the AC_INIT and
AM_INIT_AUTOMAKE macros, bringing their usage up-to-date with
the version of autoconf already specified by AC_PREREQ.
2. Add AC_CONFIG_SRCDIR macro, required by new version of AC_INIT.
3. Automatically enable all of automake's warnings except Makefile
portability (which OpenOCD violates by using GNU make's $(wildcard)).
[[ While automake has its own -Werror option, I did not enabled it
due to existing warnings. ]]
4. Add the missing AM_PROG_C_O check, required by the build rules for
openocd.o in src/Makefile.am.
5. Adjust version number to show progress toward the next release.
6. Include a bug reporting e-mail address to direct users to this list.
This patch makes the following adjustments to the Makefile.am files:
1. Update AUTOMAKE_OPTIONS to require automake version 1.6
2. Rewrite all deprecated INCLUDES assignments as AM_CPPFLAGS
3. Clean-up all AM_CPPFLAGS declarations to be patch-friendly.
4. Remove vestigial references to $(all_includes)
5. Remove erroneous references to @CPPFLAGS@ (only use AM_CPPFLAGS)
6. Remove unused -I and -D directives in helper/, flash/, target/
git-svn-id: svn://svn.berlios.de/openocd/trunk@1591 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- drscan is now a low level tcl command:
execute DR scan <device> <num_bits> <value> <num_bits1> <value2>
- removed obsolete partial command text support
git-svn-id: svn://svn.berlios.de/openocd/trunk@791 b42882b7-edfa-0310-969c-e2dbd0fdcd60