022b50950f
Support using a higher initial nrows in bulkdata, for tests
...
This gives an easy way to get a large values in the database start_pos
and end_pos fields, which is necessary for testing failure modes when
those get too large (e.g. on 32-bit systems). Adjust tests to make
use of this knob.
2015-01-18 17:49:52 -05:00
a01cb4132d
Add test for limited interval removal
2014-02-14 15:53:02 -05:00
f5276e9fc8
Test --no-decim
2013-08-16 15:34:35 -04:00
a79d6104d5
Documentation fixups
2013-08-01 16:24:51 -04:00
8e8ec59e30
Support "nilmtool cmd --version"
2013-08-01 15:14:34 -04:00
bd7bdb2eb8
Add --optimize option to nilmtool intervals
2013-07-30 15:31:51 -04:00
b5df575c79
Fix tests
2013-05-09 22:27:10 -04:00
9a2699adfc
Attempt at fixing up more Unicode issues with metadata.
2013-05-07 13:44:03 -04:00
539c92226c
Add more disk space info
2013-05-06 11:36:28 -04:00
f2a48bdb2a
Test binary extract; fix bugs
2013-04-11 13:24:11 -04:00
416a499866
Support wildcards for destroy
2013-04-10 16:23:07 -04:00
0104c8edd9
nilmtool remove: allow wildcards and multiple paths
2013-04-10 15:27:46 -04:00
83d022016c
nilmtool list: add new --layout option to show layouts
2013-04-10 14:58:44 -04:00
43b740ecaa
nilmtool list: remove old -p parameter
2013-04-10 14:48:23 -04:00
230ec72609
Fix timestamp display issues with --annotate
2013-04-09 18:19:32 -04:00
9ce0f69dff
Add "--delete" option to "nilmtool metadata" tool
...
This is the same as "--update" with an empty string as the value.
2013-04-02 16:07:28 -04:00
ebccfb3531
Fix stream renaming when the new path is a parent of the old
2013-04-01 19:25:17 -04:00
89be6f5931
Add option to include interval start/end markup on extract
...
When enabled, lines like "# interval-start 1234567890123456" and "#
interval-end 1234567890123456" will be added to the data output. Note
that there may be an "interval-end" timestamp followed by an identical
"interval-start" timestamp, if the response at the nilmdb level was
split up into multiple chunks.
In general, assume contiguous data if previous_interval_end ==
new_interval_start.
2013-03-19 14:23:33 -04:00
4cdef3285d
Destroy now requires that all data has been previously removed.
...
Added new flag "-R" to command line to perform an automatic removal.
This should be the last of the ways in which a single command could
block the nilmdb thread for a long time.
2013-03-18 19:39:03 -04:00
bcd82c4d59
Limit the number of rows removed per call to nilmdb.stream_remove
...
Server class will retry as needed, as with stream_extract and
stream_intervals.
2013-03-18 18:22:45 -04:00
2d72891162
Accept "min" and "max" as timestamps on command line
2013-03-18 18:19:24 -04:00
049375d30e
Fill out test coverage
2013-03-15 18:08:21 -04:00
90b96799ac
Bulk of the switch to int64 microsecond timestamps, including test data.
2013-03-15 15:08:58 -04:00
b5541722c2
Continue moving time-handling code into nilmdb.utils.time
2013-03-15 15:08:58 -04:00
b9f0b35bbe
Stream renaming support, and comprehensive tests
...
Implemented in command line, client, server, nilmdb, bulkdata
2013-03-14 11:02:30 -04:00
b1b09f8cd0
Strengthen checks when creating paths, fix some bugs, and add tests
2013-03-13 17:45:47 -04:00
d467df7980
Add specific error for creating a path that already exists
2013-03-13 10:14:28 -04:00
b77f07a4cd
Fix reporting of parsing errors with malformed data
...
strtod() and friends will happily swallow newlines, so we need to skip
over spaces and look for that sort of thing manually.
2013-03-12 16:44:36 -04:00
83bc5bc775
Make rocket/bulkdata errors include column number and the bad data
...
The bad line is printed out on a new line, and a third line
with a ^ to indicate the position of the error.
2013-03-12 16:10:00 -04:00
7eca587fdf
Add 'nilmtool intervals' command, with --diff option
...
Can show the set-difference between the interval ranges in two
streams.
2013-03-11 17:07:26 -04:00
8e79998e95
Tune sqlite to use write-ahead-logging
...
Enable the following pragmas: synchronous=NORMAL, journal_mode=WAL.
This offers a significant speedup to INSERT times compared to
synchronous=FULL, and is roughly the same as synchronous=OFF
but should be a bit safer.
2013-03-11 15:13:43 -04:00
9f914598c2
Make /stream/list give some more extended info, like row count
...
Also changes the HTTP parameter from "extent" to "extended",
and the commandline parameter from "extent" to "ext".
2013-03-11 15:13:43 -04:00
232a3876c2
Clean up imports to separate client and server more.
...
"import nilmdb" doesn't do much; "import nilmdb.client" or "import
nilmdb.server" is now required.
2013-03-11 15:13:42 -04:00
92724d10ba
Rework 'nilmtool insert' and some client stuff to speed up inserting data
...
Still needs work.
2013-03-06 20:49:14 -05:00
ea3ea487bc
Merge branch 'rocket-insert'
...
Conflicts:
nilmdb/server/bulkdata.py
nilmdb/server/server.py
nilmdb/utils/__init__.py
2013-03-06 20:46:04 -05:00
69ad8c4842
Merge branch 'rocket'
2013-03-06 20:38:02 -05:00
84e21ff467
Move ASCII data parsing from the server to the rocket interface.
...
The server buffers the string and passes it to nilmdb. Nilmdb passes
the string to bulkdata. Bulkdata uses the rocket interface to parse
it in chunks, as necessary. Everything gets passed back up and
everyone is happy.
Currently, only pyrocket implements append_string.
2013-03-05 17:51:17 -05:00
11b228f77a
Convert times to microsecond precision strings more consistently.
...
Use a new helper, nilmdb.utils.time.float_to_time_string().
This will help if we ever want to change representation (like using
uint64 microseconds since epoch, which saves us from having to
waste bits on the floating-point exponent)
2013-03-05 17:07:39 -05:00
79755dc624
Fix Allow: header by switching to cherrypy's built in tools.allow().
...
Replaces custom tools.allow_methods which didn't return the Allow: header.
2013-03-04 14:08:37 -05:00
e318888a06
Finish Rocket.extract_string; clean up code for other functions too
...
This is maybe 2.5-3 times faster than the list-based code, which
still isn't amazing, but is decent.
2013-03-03 21:25:00 -05:00
9b6de6ecb7
Replace old layout strings everywhere
2013-03-03 13:37:02 -05:00
28310fe886
Add test for extents
2013-03-02 15:19:25 -05:00
521ff88f7c
Support 'nilmtool help command' just like 'nilmtool command --help'
2013-03-02 13:56:03 -05:00
64897a1dd1
Change port from 12380 -> 32180 when running tests
...
This is so tests can be run without interfering with a normal server.
2013-03-02 13:19:44 -05:00
e3f335dfe5
Move time parsing from cmdline into nilmdb.utils.time
2013-02-28 17:09:26 -05:00
50a4a60786
Replace pyCurl with Requests
...
Only tested with v1.1.0. It's not clear how well older versions will
work.
2013-02-26 17:45:40 -05:00
317c53ab6f
Improve serializer_proxy and verify_thread_proxy
...
These functions can now take an object or a type (class).
If given an object, they will wrap subsequent calls to that object.
If given a type, they will return an object that can be instantiated
to create a new object, and all calls including __init__ will be
covered by the serialization or thread verification.
2013-02-23 14:28:37 -05:00
dfbbe23512
Switch to explicitly wrapping nilmdb objects in a serializer_proxy
...
This is quite a bit simpler than the class decorator method, so it
may be more reliable.
2013-02-23 11:23:54 -05:00
a49c655816
Strictly enforce (start < end) for all intervals.
...
Previously, we allowed start == end, but this doesn't make sense with
half-open intervals.
2013-02-21 14:06:40 -05:00
841b2dab5c
server: Replace /dbpath and /dbsize with a more generic /dbinfo
...
Update tests accordingly. This isn't backwards compatible, but
existing clients don't rely on it.
2013-02-14 16:57:33 -05:00
