prep: only process intervals present in both raw & sinefit

Makefile

@@ -46,7 +46,8 @@ test_prep: /tmp/raw.dat
 	nilmtool create /test/sinefit float32_3
 	nilmtool create /test/prep float32_8
 	nilmtool insert -s '@0' -t -r 8000 /test/raw /tmp/raw.dat
-	nilmtools/sinefit.py -a 0.5 -c 1 /test/raw /test/sinefit
+	nilmtools/sinefit.py -a 0.5 -c 1 -s '@0' -e '@5000000' /test/raw /test/sinefit
+	nilmtools/prep.py -c 2 /test/raw /test/sinefit /test/prep
 	nilmtools/prep.py -c 2 /test/raw /test/sinefit /test/prep
 	nilmtool extract -s min -e max /test/prep | head -20
 

README.txt

@@ -6,9 +6,9 @@ Prerequisites:
 
   # Runtime and build environments
   sudo apt-get install python2.7 python2.7-dev python-setuptools
-  sudo apt-get install python-numpy python-scipy
+  sudo apt-get install python-numpy python-scipy python-daemon
 
-  nilmdb (1.8.1+)
+  nilmdb (1.8.5+)
 
 Install:
 

extras/sample-cron-scripts/capture.sh

@@ -0,0 +1,10 @@
+#!/bin/bash
+
+# Start the ethstream capture using nilm-pipewatch
+
+# Bail out on errors
+set -e
+
+nilm-pipewatch --daemon --lock "/tmp/nilmdb-capture.lock" --timeout 30 \
+    "ethstream -a 192.168.1.209 -n 9 -r 8000 -N" \
+    "nilm-insert -m 10 -r 8000 --live /sharon/raw"

extras/sample-cron-scripts/cleanup.cfg

@@ -0,0 +1,8 @@
+[/sharon/prep-*]
+keep = 1y
+
+[/sharon/raw]
+keep = 2w
+
+[/sharon/sinefit]
+keep = 1y

extras/sample-cron-scripts/crontab

@@ -0,0 +1,9 @@
+# Install this by running "crontab crontab" (will replace existing crontab)
+
+# m h dom mon dow cmd
+
+# Run NilmDB processing every 5 minutes
+*/5 * * * * chronic /home/nilm/data/process.sh
+
+# Check the capture process every minute
+*/1 * * * * chronic /home/nilm/data/capture.sh

extras/sample-cron-scripts/process.sh

@@ -0,0 +1,28 @@
+#!/bin/bash
+# Run all necessary processing on NilmDB data.
+
+# Bail out on errors
+set -e
+
+# Ensure only one copy of this code runs at a time:
+LOCKFILE="/tmp/nilmdb-process.lock"
+exec 99>"$LOCKFILE"
+if ! flock -n -x 99 ; then
+    echo "NilmDB processing already running, giving up..."
+    exit 0
+fi
+trap 'rm -f "$LOCKFILE"' 0
+
+# sinefit on phase A voltage
+nilm-sinefit -c 5 /sharon/raw /sharon/sinefit
+
+# prep on A, B, C with appropriate rotations
+nilm-prep -c 1 -r 0 /sharon/raw /sharon/sinefit /sharon/prep-a
+nilm-prep -c 2 -r 120 /sharon/raw /sharon/sinefit /sharon/prep-b
+nilm-prep -c 3 -r 240 /sharon/raw /sharon/sinefit /sharon/prep-c
+
+# decimate raw and prep data
+nilm-decimate-auto /sharon/raw /sharon/prep*
+
+# run cleanup
+nilm-cleanup --yes /home/nilm/data/cleanup.cfg

nilmtools/filter.py

@@ -316,7 +316,8 @@ class Filter(object):
         self._client_dest.stream_update_metadata(self.dest.path, data)
 
     # The main filter processing method.
-    def process_numpy(self, function, args = None, rows = 100000):
+    def process_numpy(self, function, args = None, rows = 100000,
+                      intervals = None):
         """Calls process_numpy_interval for each interval that currently
         exists in self.src, but doesn't exist in self.dest.  It will
         process the data in chunks as follows:
@@ -325,6 +326,9 @@ class Filter(object):
         corresponding to the data.  The data is converted to a Numpy
         array in chunks of 'rows' rows at a time.
 
+        If 'intervals' is not None, process those intervals instead of
+        the default list.
+
         'function' should be defined as:
         # def function(data, interval, args, insert_func, final)
 
@@ -358,7 +362,7 @@ class Filter(object):
                                            maxrows = rows)
         inserter_func = functools.partial(inserter, self.dest.path)
 
-        for interval in self.intervals():
+        for interval in (intervals or self.intervals()):
             print "Processing", interval.human_string()
             process_numpy_interval(interval, extractor_func, inserter_func,
                                    rows * 3, function, args)

nilmtools/pipewatch.py

@@ -15,6 +15,7 @@ import threading
 import select
 import signal
 import Queue
+import daemon
 
 def parse_args(argv = None):
     parser = argparse.ArgumentParser(
@@ -29,6 +30,8 @@ def parse_args(argv = None):
     Intended for use with ethstream (generator) and nilm-insert
     (consumer).  Commands are executed through the shell.
     """)
+    parser.add_argument("-d", "--daemon", action="store_true",
+                        help="Run in background")
     parser.add_argument("-l", "--lock", metavar="FILENAME", action="store",
                         default=tempfile.gettempdir() +
                         "/nilm-pipewatch.lock",
@@ -74,82 +77,92 @@ def watcher_thread(queue, procs):
                 return
         time.sleep(0.25)
 
+def pipewatch(args):
+    # Run the processes, etc
+    with open(os.devnull, "r") as devnull:
+        generator = subprocess.Popen(args.generator, shell = True,
+                                     bufsize = -1, close_fds = True,
+                                     stdin = devnull,
+                                     stdout = subprocess.PIPE,
+                                     stderr = None)
+        consumer = subprocess.Popen(args.consumer, shell = True,
+                                    bufsize = -11, close_fds = True,
+                                    stdin = subprocess.PIPE,
+                                    stdout = None, stderr = None)
+
+        queue = Queue.Queue(maxsize = 32)
+        reader = threading.Thread(target = reader_thread,
+                                  args = (queue, generator.stdout.fileno()))
+        reader.start()
+        watcher = threading.Thread(target = watcher_thread,
+                                   args = (queue, [generator, consumer]))
+        watcher.start()
+        try:
+            while True:
+                try:
+                    data = queue.get(True, args.timeout)
+                    if data is None:
+                        break
+                    consumer.stdin.write(data)
+                except Queue.Empty:
+                    # Timeout: kill the generator
+                    fprintf(sys.stderr, "pipewatch: timeout\n")
+                    generator.terminate()
+                    break
+
+            generator.stdout.close()
+            consumer.stdin.close()
+        except IOError:
+            fprintf(sys.stderr, "pipewatch: I/O error\n")
+
+        def kill(proc):
+            # Wait for a process to end, or kill it
+            def poll_timeout(proc, timeout):
+                for x in range(1+int(timeout / 0.1)):
+                    if proc.poll() is not None:
+                        break
+                    time.sleep(0.1)
+                return proc.poll()
+            try:
+                if poll_timeout(proc, 0.5) is None:
+                    proc.terminate()
+                    if poll_timeout(proc, 0.5) is None:
+                        proc.kill()
+            except OSError:
+                pass
+            return poll_timeout(proc, 0.5)
+
+        # Wait for them to die, or kill them
+        gret = kill(generator)
+        cret = kill(consumer)
+
+        fprintf(sys.stderr, "pipewatch: generator returned %d, " +
+                "consumer returned %d\n", gret, cret)
+        if gret == 0 and cret == 0:
+            sys.exit(0)
+        sys.exit(1)
+
 def main(argv = None):
     args = parse_args(argv)
 
-    with open(args.lock, "w") as lockfile:
-        if not nilmdb.utils.lock.exclusive_lock(lockfile):
-            printf("pipewatch process already running (according to %s)\n",
-                   args.lock)
-            sys.exit(0)
-
-
-        with open(os.devnull, "r") as devnull:
-            generator = subprocess.Popen(args.generator, shell = True,
-                                         bufsize = -1, close_fds = True,
-                                         stdin = devnull,
-                                         stdout = subprocess.PIPE,
-                                         stderr = None)
-            consumer = subprocess.Popen(args.consumer, shell = True,
-                                        bufsize = -11, close_fds = True,
-                                        stdin = subprocess.PIPE,
-                                        stdout = None, stderr = None)
-
-            queue = Queue.Queue(maxsize = 32)
-            reader = threading.Thread(target = reader_thread,
-                                      args = (queue, generator.stdout.fileno()))
-            reader.start()
-            watcher = threading.Thread(target = watcher_thread,
-                                       args = (queue, [generator, consumer]))
-            watcher.start()
-            try:
-                while True:
-                    try:
-                        data = queue.get(True, args.timeout)
-                        if data is None:
-                            break
-                        consumer.stdin.write(data)
-                    except Queue.Empty:
-                        # Timeout: kill the generator
-                        fprintf(sys.stderr, "pipewatch: timeout\n")
-                        generator.terminate()
-                        break
-
-                generator.stdout.close()
-                consumer.stdin.close()
-            except IOError:
-                fprintf(sys.stderr, "pipewatch: I/O error\n")
-
-            def kill(proc):
-                # Wait for a process to end, or kill it
-                def poll_timeout(proc, timeout):
-                    for x in range(1+int(timeout / 0.1)):
-                        if proc.poll() is not None:
-                            break
-                        time.sleep(0.1)
-                    return proc.poll()
-                try:
-                    if poll_timeout(proc, 0.5) is None:
-                        proc.terminate()
-                        if poll_timeout(proc, 0.5) is None:
-                            proc.kill()
-                except OSError:
-                    pass
-                return poll_timeout(proc, 0.5)
-
-            # Wait for them to die, or kill them
-            gret = kill(generator)
-            cret = kill(consumer)
-
-            fprintf(sys.stderr, "pipewatch: generator returned %d, " +
-                    "consumer returned %d\n", gret, cret)
-            if gret == 0 and cret == 0:
-                sys.exit(0)
-            sys.exit(1)
+    lockfile = open(args.lock, "w")
+    if not nilmdb.utils.lock.exclusive_lock(lockfile):
+        printf("pipewatch process already running (according to %s)\n",
+               args.lock)
+        sys.exit(0)
     try:
-        os.unlink(args.lock)
-    except OSError:
-        pass
+        # Run as a daemon if requested, otherwise run directly.
+        if args.daemon:
+            with daemon.DaemonContext(files_preserve = [ lockfile ]):
+                pipewatch(args)
+        else:
+            pipewatch(args)
+    finally:
+        # Clean up lockfile
+        try:
+            os.unlink(args.lock)
+        except OSError:
+            pass
 
 if __name__ == "__main__":
     main()

nilmtools/prep.py

@@ -12,6 +12,7 @@ import scipy.fftpack
 import scipy.signal
 #from matplotlib import pyplot as p
 import bisect
+from nilmdb.utils.interval import Interval
 
 def main(argv = None):
     # Set up argument parser
@@ -82,9 +83,20 @@ def main(argv = None):
                             "prep_column": args.column,
                             "prep_rotation": repr(rotation) })
 
-    # Run the processing function on all data
+    # Find the intersection of the usual set of intervals we'd filter,
+    # and the intervals actually present in sinefit data.  This is
+    # what we will process.
+    filter_int = f.intervals()
+    sinefit_int = ( Interval(start, end) for (start, end) in
+                    client_sinefit.stream_intervals(
+                        args.sinepath, start = f.start, end = f.end) )
+    intervals = nilmdb.utils.interval.intersection(filter_int, sinefit_int)
+
+    # Run the process (using the helper in the filter module)
     f.process_numpy(process, args = (client_sinefit, sinefit.path, args.column,
-                                     args.nharm, rotation, args.nshift))
+                                     args.nharm, rotation, args.nshift),
+                    intervals = intervals)
+
 
 def process(data, interval, args, insert_function, final):
     (client, sinefit_path, column, nharm, rotation, nshift) = args

setup.py

@@ -61,9 +61,10 @@ setup(name='nilmtools',
       long_description = "NILM Database Tools",
       license = "Proprietary",
       author_email = 'jim@jtan.com',
-      install_requires = [ 'nilmdb >= 1.8.1',
+      install_requires = [ 'nilmdb >= 1.8.5',
                            'numpy',
                            'scipy',
+                           'python-daemon >= 1.5',
                            #'matplotlib',
                            ],
       packages = [ 'nilmtools',